Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1602.01554

Strong coupling in multimode quantum electromechanics

Atsushi Noguchi, Rekishu Yamazaki, Manabu Ataka, Hiroyuki Fujita, Yutaka Tabuchi, T. Ishikawa, Koji Usami, Yasunobu Nakamura

Published Feb 4, 2016• 2 citations
arXivHTMLPDF

Abstract

Cavity electro-(opto-)mechanics allows us to access not only single isolated but also multiple mechanical modes in a massive object. Here we develop a multi-mode electromechanical system in which a several membrane vibrational modes are coupled to a three-dimensional loop-gap superconducting microwave cavity. The tight confinement of the electric field across a mechanically-compliant narrow-gap capacitor brings the system into the quantum strong coupling regime under a red-sideband pump field. We demonstrate strong coupling between two mechanical modes, which is induced by two-tone parametric drives and mediated by a virtual photon in the cavity. The tunable inter-mechanical-mode coupling can be used to generate entanglement between the mechanical modes.

DOI
10.48550/arxiv.1602.01554

Related papers

Tunable microwave-optical entanglement and conversion in multimode electro-opto-mechanics

Tianli Wei, Dewei Wu, Qiang Miao +2 more

We study tunable double-channel microwave-optical (M-O) entanglement and coherent conversion by controlling the quantum interference effect. This is realized in a two-mechanical-mode electro-opto-mechanical (EOM) system, in which two mechanical resonators (MRs) are coupled with each other by phase-dependent phonon-phonon interaction, and link the interaction between the microwave and optical cavity. It's demonstrated that the mechanical coupling between two MRs leads to the interference of two pathways of electro-opto-mechanical interaction, which can generate the tunable double-channel phenomena in comparison with a typical three-mode EOM system. In particular, by tuning of phonon-phonon interaction and couplings between cavities with MRs, we can not only steer the switch from the M-O interaction with a single channel to that of the double-channel, but also modulate the entanglement and conversion characteristics in each channel. Moreover, our scheme can be extended to an N-mechanical-mode EOM system, in which N discrete channels will be observed and controlled. This study opens up prospects for quantum information transduction and storage with a wide bandwidth and multichannel quantum interface.

Optics Express•Mar 8, 2022•5 citations

Hybrid optomechanical systems as transducers for quantum information

S. Deléglise, Thibault Capelle, T. Jacqmin +5 more

Summary form only given. The motion of a micromechanical resonator coupled simultaneously to a high-finesse optical cavity and a microwave resonator can be used to transduce the fragile quantum states generated in the realm of microwave superconducting circuits into optical photons that can transport quantum information over large distances in telecom optical fibers at room temperature. We have engineered the optical and mechanical properties of thin membranes patterned in a suspended high-stress Si3N4 film to realize such a hybrid opto-electro-mechanical system. An optical Fabry-Perot cavity with a finesse exceeding 12 000 was realized between a highly reflective photonic crystal patch realized on the suspended membrane and a conventional high-reflectivity mirror. The electromechanical coupling with a nearby planar superconducting circuit is achieved by approaching the membrane at a sub-micron distance from an on-chip interdigitated capacitor. By operating the hybrid opto-electro-mechanical system in a cryogenic environment, the photon-phonon swap rates between microwave, mechanical, and optical degrees of freedom is expected to overcome the mechanical decoherence rate. An artist view of the device envisioned is depicted on Figure 1.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2017•0 citations

Enhanced electromechanical coupling of a nanomechanical resonator to coupled superconducting cavities

Fuli Li, Hongrong Li, Fuli Li

We investigate the electromechanical coupling between a nanomechanical resonator and two parametrically coupled superconducting coplanar waveguide cavities that are driven by a two-mode squeezed microwave source. We show that, with the selective coupling of the resonator to the cavity Bogoliubov modes, the radiation-pressure type coupling can be greatly enhanced by several orders of magnitude, enabling the single photon strong coupling to be reached. This allows the investigation of a number of interesting phenomena such as photon blockade effects and the generation of nonclassical quantum states with electromechanical systems.

arXiv:1503.02393•Scientific Reports•Jan 12, 2016•19 citations

Hybrid optomechanical systems as transducers for quantum information

S. Deléglise, Thibault Capelle, Chen Xu +6 more

The motion of a micromechanical resonator coupled simultaneously to a high-finesse optical cavity and a microwave resonator can be used to transduce the fragile quantum states generated in the realm of microwave superconducting circuits into optical photons that can transport quantum information over large distances in telecom optical fibers at room temperature. We have engineered the optical and mechanical properties of thin membranes patterned in a suspended high-stress Si3N4 film to realize such a hybrid opto-electro-mechanical system. An optical Fabry-Perot cavity with a finesse exceeding 12 000 was realized between a highly reflective photonic crystal patch realized on the suspended membrane and a conventional high-reflectivity mirror. The electromechanical coupling with a nearby planar superconducting circuit is achieved by approaching the membrane at a sub-micron distance from an on-chip interdigitated capacitor. By operating the hybrid opto-electro-mechanical system in a cryogenic environment, the photon-phonon swap rates between microwave, mechanical, and optical degrees of freedom is expected to overcome the mechanical decoherence rate.

Quantum Information and Measurement (QIM)•Jan 1, 2017•0 citations

Robust continuous-variable entanglement of microwave photons with cavity electromechanics

Fuli Li, Shaoyan Gao, Fuli Li

We investigate the controllable generation of robust photon entanglement with a circuit cavity electromechanical system, consisting of two superconducting coplanar waveguide cavities capacitively coupled by a nanoscale mechanical resonator. We show that, with this electromechanical system, two-mode continuous-variable entanglement of cavity photons can be engineered deterministically either via coherent control on the dynamics of the system, or through a dissipative quantum-dynamical process. The first scheme, operating in the strong-coupling regime, explores the excitation of the cavity Bogoliubov modes and is insensitive to the initial thermal noise. The second one is based on the reservoir-engineering approach, which exploits the mechanical dissipation as a useful resource to perform ground-state cooling of two delocalized cavity Bogoliubov modes. The achieved amount of entanglement in both schemes is determined by the relative ratio of the effective electromechanical coupling strengths, which thus can be tuned and made much larger than that in previous studies.

arXiv:1301.5690•Physical Review A•Oct 2, 2013•20 citations

Superconducting Electromechanical and Nanophotonic Devices for Quantum Measurement and Conversion

Mahmoud Kalaee

Microscale and nanoscale mechanical resonators have been used in advanced technological applications, from high precision time keeping and mass sensing, to processing high frequency signals in mobile communications. In the last few decades, they have been an important part of progress in the field of quantum information and metrology and have been proposed as quantum memories or transducers for measuring or connecting different types of quantum systems. The field of cavity optomechanics and electromechanics is concerned with coupling the electromagnetic field of a resonant optical cavity or electrical circuit to mechanical motion. These systems provide potential means to control and engineer the state of a mechanical object at the quantum level. This thesis contains the description of mechanical systems in megahertz to a few hundred megahertz frequency range formed by nano-fabricating photonic, phononic, and electrical circuits on a chip. These structures are designed to provide a large radiation pressure coupling between mechanical motion and electromagnetic fields to address and manipulate motional degrees of freedom. Qualitatively novel quantum effects are expected when one takes a step beyond linear coupling and exploits higher order interactions. To that end, we integrate electrical, mechanical and photonic structures in a multimode photonic crystal structure to observe "x2-coupling", where the optical cavity frequency is coupled to the square of the mechanical displacement. Moreover, we have developed two integrated on-chip platforms based on Si3N4 and Si nanomembranes capable of interfacing superconducting qubits and optical photons and realizing reversible microwave-to-optical conversion. We employ radiation pressure to cool these mechanical resonators to their quantum ground state. Finally, we demonstrate a form of electromechanical crystal for coupling microwave photons and hypersonic phonons of frequency ωm/2π = 0.425 GHz by capacitively coupling a phononic crystal acoustic cavity to a superconducting microwave resonator. Moving to higher frequency acoustic cavities not only facilitates the integration of electromechanical circuits and nanophotonic systems capable of operation in the resolved sideband limit of optomechanics for noise-free quantum signal conversion, but it opens up the possibility of using phonons as information carriers via phononic circuits. Utilizing a two-photon resonance condition for efficient microwave pumping and phononic bandgap shield to eliminate acoustic radiation, we achieve large cooperative electromechanical coupling (C ≈ 30) and intrinsic decay time of 2.3 ms. Moreover, electrical read-out of the phonon occupancy shows that the acoustic mode thermalizes close to its quantum ground-state of motion (phonon occupancy nm=1.5) at a fridge temperature of Tf = 10 mK. We conclude by considering several designs and fabrication improvements to the hypersonic electromechanical crystals that would enable them to perform quantum conversion between the electrical and acoustic domain.

•Oct 29, 2018•0 citations
Cavity electro-(opto-)mechanics allows us to access not only single isolated but also multiple mechanical modes in a massive object. Here we develop a multi-mode electromechanical system in which a several membrane vibrational modes are coupled to a three-dimensional loop-gap superconducting microwave cavity. The tight confinement of the electric field across a mechanically-compliant narrow-gap capacitor brings the system into the quantum strong coupling regime under a red-sideband pump field. We demonstrate strong coupling between two mechanical modes, which is induced by two-tone parametric drives and mediated by a virtual photon in the cavity. The tunable inter-mechanical-mode coupling can be used to generate entanglement between the mechanical modes.
We study tunable double-channel microwave-optical (M-O) entanglement and coherent conversion by controlling the quantum interference effect. This is realized in a two-mechanical-mode electro-opto-mechanical (EOM) system, in which two mechanical resonators (MRs) are coupled with each other by phase-dependent phonon-phonon interaction, and link the interaction between the microwave and optical cavity. It's demonstrated that the mechanical coupling between two MRs leads to the interference of two pathways of electro-opto-mechanical interaction, which can generate the tunable double-channel phenomena in comparison with a typical three-mode EOM system. In particular, by tuning of phonon-phonon interaction and couplings between cavities with MRs, we can not only steer the switch from the M-O interaction with a single channel to that of the double-channel, but also modulate the entanglement and conversion characteristics in each channel. Moreover, our scheme can be extended to an N-mechanical-mode EOM system, in which N discrete channels will be observed and controlled. This study opens up prospects for quantum information transduction and storage with a wide bandwidth and multichannel quantum interface.
Summary form only given. The motion of a micromechanical resonator coupled simultaneously to a high-finesse optical cavity and a microwave resonator can be used to transduce the fragile quantum states generated in the realm of microwave superconducting circuits into optical photons that can transport quantum information over large distances in telecom optical fibers at room temperature. We have engineered the optical and mechanical properties of thin membranes patterned in a suspended high-stress Si3N4 film to realize such a hybrid opto-electro-mechanical system. An optical Fabry-Perot cavity with a finesse exceeding 12 000 was realized between a highly reflective photonic crystal patch realized on the suspended membrane and a conventional high-reflectivity mirror. The electromechanical coupling with a nearby planar superconducting circuit is achieved by approaching the membrane at a sub-micron distance from an on-chip interdigitated capacitor. By operating the hybrid opto-electro-mechanical system in a cryogenic environment, the photon-phonon swap rates between microwave, mechanical, and optical degrees of freedom is expected to overcome the mechanical decoherence rate. An artist view of the device envisioned is depicted on Figure 1.
We investigate the electromechanical coupling between a nanomechanical resonator and two parametrically coupled superconducting coplanar waveguide cavities that are driven by a two-mode squeezed microwave source. We show that, with the selective coupling of the resonator to the cavity Bogoliubov modes, the radiation-pressure type coupling can be greatly enhanced by several orders of magnitude, enabling the single photon strong coupling to be reached. This allows the investigation of a number of interesting phenomena such as photon blockade effects and the generation of nonclassical quantum states with electromechanical systems.
The motion of a micromechanical resonator coupled simultaneously to a high-finesse optical cavity and a microwave resonator can be used to transduce the fragile quantum states generated in the realm of microwave superconducting circuits into optical photons that can transport quantum information over large distances in telecom optical fibers at room temperature. We have engineered the optical and mechanical properties of thin membranes patterned in a suspended high-stress Si3N4 film to realize such a hybrid opto-electro-mechanical system. An optical Fabry-Perot cavity with a finesse exceeding 12 000 was realized between a highly reflective photonic crystal patch realized on the suspended membrane and a conventional high-reflectivity mirror. The electromechanical coupling with a nearby planar superconducting circuit is achieved by approaching the membrane at a sub-micron distance from an on-chip interdigitated capacitor. By operating the hybrid opto-electro-mechanical system in a cryogenic environment, the photon-phonon swap rates between microwave, mechanical, and optical degrees of freedom is expected to overcome the mechanical decoherence rate.
We investigate the controllable generation of robust photon entanglement with a circuit cavity electromechanical system, consisting of two superconducting coplanar waveguide cavities capacitively coupled by a nanoscale mechanical resonator. We show that, with this electromechanical system, two-mode continuous-variable entanglement of cavity photons can be engineered deterministically either via coherent control on the dynamics of the system, or through a dissipative quantum-dynamical process. The first scheme, operating in the strong-coupling regime, explores the excitation of the cavity Bogoliubov modes and is insensitive to the initial thermal noise. The second one is based on the reservoir-engineering approach, which exploits the mechanical dissipation as a useful resource to perform ground-state cooling of two delocalized cavity Bogoliubov modes. The achieved amount of entanglement in both schemes is determined by the relative ratio of the effective electromechanical coupling strengths, which thus can be tuned and made much larger than that in previous studies.
Microscale and nanoscale mechanical resonators have been used in advanced technological applications, from high precision time keeping and mass sensing, to processing high frequency signals in mobile communications. In the last few decades, they have been an important part of progress in the field of quantum information and metrology and have been proposed as quantum memories or transducers for measuring or connecting different types of quantum systems. The field of cavity optomechanics and electromechanics is concerned with coupling the electromagnetic field of a resonant optical cavity or electrical circuit to mechanical motion. These systems provide potential means to control and engineer the state of a mechanical object at the quantum level. This thesis contains the description of mechanical systems in megahertz to a few hundred megahertz frequency range formed by nano-fabricating photonic, phononic, and electrical circuits on a chip. These structures are designed to provide a large radiation pressure coupling between mechanical motion and electromagnetic fields to address and manipulate motional degrees of freedom. Qualitatively novel quantum effects are expected when one takes a step beyond linear coupling and exploits higher order interactions. To that end, we integrate electrical, mechanical and photonic structures in a multimode photonic crystal structure to observe "x2-coupling", where the optical cavity frequency is coupled to the square of the mechanical displacement. Moreover, we have developed two integrated on-chip platforms based on Si3N4 and Si nanomembranes capable of interfacing superconducting qubits and optical photons and realizing reversible microwave-to-optical conversion. We employ radiation pressure to cool these mechanical resonators to their quantum ground state. Finally, we demonstrate a form of electromechanical crystal for coupling microwave photons and hypersonic phonons of frequency ωm/2π = 0.425 GHz by capacitively coupling a phononic crystal acoustic cavity to a superconducting microwave resonator. Moving to higher frequency acoustic cavities not only facilitates the integration of electromechanical circuits and nanophotonic systems capable of operation in the resolved sideband limit of optomechanics for noise-free quantum signal conversion, but it opens up the possibility of using phonons as information carriers via phononic circuits. Utilizing a two-photon resonance condition for efficient microwave pumping and phononic bandgap shield to eliminate acoustic radiation, we achieve large cooperative electromechanical coupling (C ≈ 30) and intrinsic decay time of 2.3 ms. Moreover, electrical read-out of the phonon occupancy shows that the acoustic mode thermalizes close to its quantum ground-state of motion (phonon occupancy nm=1.5) at a fridge temperature of Tf = 10 mK. We conclude by considering several designs and fabrication improvements to the hypersonic electromechanical crystals that would enable them to perform quantum conversion between the electrical and acoustic domain.