arXiv:1512.07609 · Physical Review Letters

Macroscopic Quantum Superposition in Cavity Optomechanics

Jie‐Qiao Liao, Lin Tian

Published Apr 19, 2016• 203 citations

Abstract

Quantum superposition in mechanical systems is not only key evidence for macroscopic quantum coherence, but can also be utilized in modern quantum technology. Here we propose an efficient approach for creating macroscopically distinct mechanical superposition states in a two-mode optomechanical system. Photon hopping between the two cavity modes is modulated sinusoidally. The modulated photon tunneling enables an ultrastrong radiation-pressure force acting on the mechanical resonator, and hence significantly increases the mechanical displacement induced by a single photon. We study systematically the generation of the Yurke-Stoler-like states in the presence of system dissipations. We also discuss the experimental implementation of this scheme.

DOI: 10.1103/physrevlett.116.163602

Related papers

Superposition of macroscopically squeezed states with enhanced squeezing in cavity optomechanical system at single-photon level

Sainan Huai, Nie, Wei, Yunbo Zhang +1 more

We propose an efficient approach to generate the superposed macroscopically squeezed states with enhanced squeezing in a two-mode optomechanical system. This can be achieved by introducing a sinusoidal modulation to either the cavity frequencies or the coupling strengths between two cavity modes. The squeezement of the oscillator can be significantly enhanced to 12.16 dB with single photon, once the relative ratio of coupling strength is optimized under proper conditions. Further enhanced squeezing can be obtained by carefully adjusting the system parameters. In terms of the Wigner quasi-probability distribution, we show the squeezed error ellipses and interference fringes of the Yurke-Stoler-type squeezed states, denoting the squeezing and superposition properties. Our state generation scheme show reliable performance and robust resistance to finite environmental fluctuations, which implies applications for both fundamental interest and practical value.

arXiv:1905.05443May 14, 20190 citations

Quantum states preparation in cavity optomechanics

Wenchao Ge

Quantum entanglement and quantum superposition are fundamental properties of quantum mechanics, which underline quantum information and quantum computation. Preparing quantum states in the macroscopic level is both conceptually interesting for extending quantum physics to a broader sense and fundamentally important for testing the validity of quantum mechanics. In this dissertation, schemes of preparing macroscopic entanglement and macroscopic superposition states in cavity optomechanics are studied using the unitary evolution method in the nonlinear regime or Lyapunov equation in the linearized regime. Quantum entanglement and quantum superposition states can be realized using experimentally feasible parameters with the proposals in this dissertation.\nFirstly, a scheme of entangling two movable end mirrors in a Fabry-Perot cavity that are coupled to a common single photon superposition state is studied. It is shown that strong entanglement can be obtained either in the single-photon strong coupling regime deterministically or in the single-photon weak coupling regime conditionally.\nSecondly, a scheme of entangling two movable end mirrors, that are coupled to two-mode entangled fields generated from a correlated-emission laser is investigated. By tuning the input driving laser frequencies at the Stokes sidebands of the cavity, the radiation-pressure coupling can be linearized as an effective beam-splitter-like interaction. Hence entanglement can be transferred from the two-mode fields to the two mechanical mirrors. Macroscopic entanglement between macroscopic mirrors persists at temperature ~ 1K.\nThirdly, a scheme of creating macroscopic quantum superpositions of a mechanical mirror via periodically flipping a photonic qubit is proposed. Quantum superposition states of a mechanical mirror can be obtained via the nonlinear radiation coupling with a single-photon superposition state. However, the difference between two superposed mechanical states is very small due to the weak single-photon coupling rate available in experiment. By periodically flipping the photonic qubit state, the difference can be magnified. It is shown in detail that this scheme is experimentally feasible under current technology.

Jan 1, 20150 citations

Growing macroscopic superposition states via cavity quantum optomechanics

Jack Clarke, Michael Ross Vanner

The investigation of macroscopic quantum phenomena is a current active area of research that offers significant promise to advance the forefronts of both fundamental and applied quantum science. Utilising the exquisite precision and control of quantum optics provides a powerful toolset for generating such quantum states where the types and 'size' of the states that can be generated are set by the experimental parameter regime available and the resourcefulness of the protocol applied. In this work we present a new multistep scheme to 'grow' macroscopic superposition states of motion of a mechanical oscillator via cavity quantum optomechanics. The scheme consists of a series of optical pulses interacting with a mechanical mode via radiation-pressure followed by photon-counting measurements. The multistep nature of our protocol allows macroscopic superposition states to be prepared with a relaxed requirement for the single-photon optomechanical coupling strength. To illustrate the experimental feasibility of our proposal, we quantify how initial mechanical thermal occupation and mechanical decoherence affects the non-classicality and macroscopicity of the states generated and show that our scheme is resilient to optical loss. The advantages of this protocol provide a promising path to grow non-classical mechanical quantum states to a macroscopic scale under realistic experimental conditions.

arXiv:1805.09334Quantum Science and TechnologyAug 14, 201831 citations

Entangling two macroscopic mechanical mirrors in a two-cavity optomechanical system

Jie‐Qiao Liao, WU Qin-Qin, Franco Nori

We propose a simple method to generate quantum entanglement between two macroscopic mechanical resonators in a two-cavity optomechanical system. This entanglement is induced by the radiation pressure of a single photon hopping between the two cavities. Our results are analytical, so that the entangled states are explicitly shown. Up to local operations, these states are two-mode three-component states, and hence the degree of entanglement can be well quantified by the concurrence. By analyzing the system parameters, we find that, to achieve a maximum average entanglement, the system should work in the single-photon strong-coupling regime and the deep-resolved-sideband regime.

arXiv:1401.1384Physical Review AJan 10, 2014172 citations

Towards Macroscopic Quantum Effects Using Optomechanical and Optical Systems

Roohollah Ghobadi

In this thesis, I studied two different approaches which are promising for creating macroscopic quantum superpositions. The first approach, which is the main focus of this thesis, is based on optomechanical systems. The basic challenge to realize quantum effects in optomechanical systems, is considered to be the weak optomechanical coupling rate compared to the decoherence rates of the system caused by the cavity and mechanical damping. To enhance the optomechanical coupling it has been suggested to pump the cavity with coherent laser light \cite{Vitali07}. By this method the strong coupling regime in which the optomechanical coupling rate exceeds all decoherence rates has been demonstrated very recently \cite{Verhagen12,Groblacher09}. It is also known that the optomechanical systems may exhibit nonlinear behaviours such as bistability. After introducing the basic ideas of optomechanical systems in chapter 1, in chapter 2 we studied the connection between optomechanical entanglement and bistability. In chapter 3, we studied the drawback of using a laser to enhance the interaction. We studied the effect of the laser phase noise, as an additional decoherence channel, on the optomechanical entanglement. We have shown that the system is very sensitive to this new source of decoherence and the sensitivity is maximum in the bistable threshold. We discussed that our results are independent of how we model the laser phase noise. In chapter 4, we studied single photon optomechanics. In this regime, we proposed a new scheme to enhance the optomechanical coupling based on post selection. Our scheme is potentially promising to create a superposition of the massive oscillator in different motional states. We also discussed the potential application of our scheme to test some decoherence models. The second approach that we consider in this thesis is based on amplifying single photons with high gain to create micro-macro superpositions . In chapter 5, we discussed the De Martini scheme. We then present our scheme for creating optical micro-macro superposition and discussed its experimental realization under realistic conditions when losses are taken into account.

Jan 1, 20130 citations

Open System Dynamics in Quantum Optomechanics

Dan Mei Hu

In this dissertation, I theoretically investigate the open system dynamics of cavity optomechanical systems in the quantum limit, where a mechanical resonator couples to a cavity mode via radiation pressure force. Recent developments in nano-fabrication and cooling techniques make it possible to optically control and manipulate the motion of micro- and nano-mechanical resonator. Several experiments have demonstrated the possibility of preparing macroscopic mechanical resonators into their quantum ground state, which makes optomechanical systems an ideal candidate for studying the quantum behavior of macroscopic objects. One important direction in quantum optomechanics is the study of the decoherence of optomechanical system due to the interaction with their external environments. This dissertation explores the decoherence effects by considering the influence of the radiation pressure coupling on the interaction between optomechanical system and its environments. Because the effects of the nonlinear interaction vary with the optomechanical coupling strength, three different interaction regimes are fully studied here: the weak coupling, the intermediate coupling and the strong coupling.

Jan 1, 20140 citations