arXiv:1508.00447 · Scientific Reports

Coherent controlization using superconducting qubits

Nicolai Friis, Alexey A. Melnikov, Gerhard Kirchmair, Hans J. Briegel

Published Dec 15, 2015• 70 citations

Abstract

Coherent controlization, i.e., coherent conditioning of arbitrary single- or multi-qubit operations on the state of one or more control qubits, is an important ingredient for the flexible implementation of many algorithms in quantum computation. This is of particular significance when certain subroutines are changing over time or when they are frequently modified, such as in decision-making algorithms for learning agents. We propose a scheme to realize coherent controlization for any number of superconducting qubits coupled to a microwave resonator. For two and three qubits, we present an explicit construction that is of high relevance for quantum learning agents. We demonstrate the feasibility of our proposal, taking into account loss, dephasing, and the cavity self-Kerr effect.

DOI: 10.1038/srep18036

Related papers

Designing Kerr interactions using multiple superconducting qubit types in a single circuit

Matthew Elliott, Jaewoo Joo, Eran Ginossar

The engineering of Kerr interactions is of great interest for processing quantum information in multipartite quantum systems and for investigating many-body physics in a complex cavity-qubit network. We study how coupling multiple different types of superconducting qubits to the same cavity modes can be used to modify the self- and cross-Kerr effects acting on the cavities and demonstrate that this type of architecture could be of significant benefit for quantum technologies. Using both analytical perturbation theory results and numerical simulations, we first show that coupling two superconducting qubits with opposite anharmonicities to a single cavity enables the effective self-Kerr interaction to be diminished, while retaining the number splitting effect that enables control and measurement of the cavity field. We demonstrate that this reduction of the self-Kerr effect can maintain the fidelity of coherent states and generalised Schrödinger cat states for much longer than typical coherence times in realistic devices. Next, we find that the cross-Kerr interaction between two cavities can be modified by coupling them both to the same pair of qubit devices. When one of the qubits is tunable in frequency, the strength of entangling interactions between the cavities can be varied on demand, forming the basis for logic operations on the two modes. Finally, we discuss the feasibility of producing an array of cavities and qubits where intermediary and on-site qubits can tune the strength of self- and cross-Kerr interactions across the whole system. This architecture could provide a way to engineer interesting many-body Hamiltonians and be a useful platform for quantum simulation in circuit quantum electrodynamics.

arXiv:1709.04026New Journal of PhysicsOct 10, 201718 citations

Circuit QED: single-step realization of a multiqubit controlled phase gate with one microwave photonic qubit simultaneously controlling n − 1 microwave photonic qubits

Biaoliang Ye, Zhen-Fei Zheng, Yu Zhang +1 more

We present a novel method to realize a multi-target-qubit controlled phase gate with one microwave photonic qubit simultaneously controlling n - 1 target microwave photonic qubits. This gate is implemented with n microwave cavities coupled to a superconducting flux qutrit. Each cavity hosts a microwave photonic qubit, whose two logic states are represented by the vacuum state and the single photon state of a single cavity mode, respectively. During the gate operation, the qutrit remains in the ground state and thus decoherence from the qutrit is greatly suppressed. This proposal requires only a single-step operation and thus the gate implementation is quite simple. The gate operation time is independent of the number of the qubits. In addition, this proposal does not need applying classical pulse or any measurement. Numerical simulations demonstrate that high-fidelity realization of a controlled phase gate with one microwave photonic qubit simultaneously controlling two target microwave photonic qubits is feasible with current circuit QED technology. The proposal is quite general and can be applied to implement the proposed gate in a wide range of physical systems, such as multiple microwave or optical cavities coupled to a natural or artificial Λ-type three-level atom.

arXiv:1910.08542Optics ExpressNov 7, 201819 citations

A proposal for implementing ann-qubit controlled-rotation gate with three-level superconducting qubit systems in cavity QED

Chui‐Ping Yang

We present a method for implementing an n-qubit controlled-rotation gate with three-level superconducting qubit systems in cavity quantum electrodynamics. The two logical states of a qubit are represented by the two lowest levels of each system while a higher energy level is used for the gate implementation. The method operates essentially by preparing a W state conditioned on the states of the control qubits, creating a single photon in the cavity mode, and then performing an arbitrary rotation on the states of the target qubit with the assistance of the cavity photon. It is interesting to note that the basic operational steps for implementing the proposed gate do not increase with the number of qubits n, and the gate operation time decreases as the number of qubits increases. This proposal is quite general, and can be applied to various types of superconducting devices in a cavity or coupled to a resonator.

arXiv:1105.1496Journal of Physics Condensed MatterMay 19, 20114 citations

Entangling superconducting qubits in a multi-cavity system

Chui-Ping Yang, Qi-Ping Su, Shi‐Biao Zheng +1 more

Important tasks in cavity quantum electrodynamics include the generation and control of quantum states of spatially separated particles distributed in different cavities. An interesting question in this context is how to prepare entanglement among particles located in different cavities, which are important for large-scale quantum information processing. We here consider a multi-cavity system where cavities are coupled to a superconducting (SC) qubit and each cavity hosts many SC qubits. We show that all intra-cavity SC qubits plus the coupler SC qubit can be prepared in an entangled Greenberger–Horne–Zeilinger (GHZ) state, by using a single operation and without the need of measurements. The GHZ state is created without exciting the cavity modes; thus greatly suppressing the decoherence caused by the cavity-photon decay and the effect of unwanted inter-cavity crosstalk on the operation. We also introduce two simple methods for entangling the intra-cavity SC qubits in a GHZ state. As an example, our numerical simulations show that it is feasible, with current circuit-QED technology, to prepare high-fidelity GHZ states, for up to nine SC qubits by using SC qubits distributed in two cavities. This proposal can in principle be used to implement a GHZ state for an arbitrary number of SC qubits distributed in multiple cavities. The proposal is quite general and can be applied to a wide range of physical systems, with the intra-cavity qubits being either atoms, NV centers, quantum dots, or various SC qubits.

arXiv:1506.06108New Journal of PhysicsJan 11, 201650 citations

Universal controlled-phase gate with cat-state qubits in circuit QED

Yu Zhang, Xiong Zhao, Zhen-Fei Zheng +3 more

Cat-state qubits (qubits encoded with cat states) have recently drawn intensive attention due to their enhanced lifetimes with quantum error correction. We here propose a method to implement a universal controlled-phase gate of two cat-state qubits via two microwave resonators coupled to a superconducting transmon qutrit. During the gate operation, the qutrit remains in the ground state; thus decoherence from the qutrit is greatly suppressed. This proposal requires only two basic operations and neither classical pulse nor measurement is needed; therefore the gate realization is simple. Numerical simulations show that high-fidelity implementation of this gate is feasible with current circuit QED technology. The proposal is quite general and can be applied to implement the proposed gate with two microwave resonators or two optical cavities coupled to a single three-level natural or artificial atom.

arXiv:1706.07083Physical Review ANov 13, 201728 citations

Parametric Multielement Coupling Architecture for Coherent and Dissipative Control of Superconducting Qubits

Gerhard B. P. Huber, Federico A. Roy, L. Koch +20 more

As systems for quantum computing keep growing in size and number of qubits, challenges in scaling the control capabilities are becoming increasingly relevant. Efficient schemes to simultaneously mediate coherent interactions between multiple quantum systems and to reduce decoherence errors can minimize the control overhead in next-generation quantum processors. Here, we present a superconducting qubit architecture based on tunable parametric interactions to perform two-qubit gates, reset, leakage recovery, and to read out the qubits. In this architecture, parametrically driven multielement couplers selectively couple qubits to resonators and neighboring qubits, according to the frequency of the drive. We consider a system with two qubits and one readout resonator interacting via a single coupling circuit and experimentally demonstrate a controlled- Z gate with a fidelity of 98.30 ± 0.23 % , a reset operation that unconditionally prepares the qubit ground state with a fidelity of 99.80 ± 0.02 % and a leakage recovery operation with a 98.5 ± 0.3 % success probability. Furthermore, we implement a parametric readout with a single-shot assignment fidelity of 88.0 ± 0.4 % . These operations are all realized using a single tunable coupler and a statically decoupled resonator, demonstrating the experimental feasibility of the proposed architecture and its potential for reducing the system complexity in scalable quantum processors.

arXiv:2403.02203PRX QuantumJun 11, 20258 citations