Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1505.01015 · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Superconducting metamaterials and qubits

B. L. T. Plourde, H. Wang, Francisco P. M. Rouxinol, Matthew LaHaye

Published May 21, 2015• 5 citations
arXivHTMLPDF

Abstract

Superconducting thin-film metamaterial resonators can provide a dense microwave mode spectrum with potential applications in quantum information science. We report on the fabrication and low-temperature measurement of metamaterial transmission-line resonators patterned from Al thin films. We also describe multiple approaches for numerical simulations of the microwave properties of these structures, along with comparisons with the measured transmission spectra. The ability to predict the mode spectrum based on the chip layout provides a path towards future designs integrating metamaterial resonators with superconducting qubits.

DOI
10.1117/12.2180012

Related papers

Fabrication and Characterization of Superconducting Metamaterial Resonators

Haozhi Wang

Superconducting circuits operated at low temperatures have led to rapid advances in quantum information processing as well as quantum optics in the microwave regime. Engineered quantum systems with a dense spectrum of modes coupled to artificial atoms, or qubits, formed from superconducting circuits offer an opportunity to explore large-scale entanglement or perform quantum simulations of many-body phenomena. Recent research efforts into artificial metamaterials have yielded microwave and optical systems with numerous counterintuitive properties, including left-handed transmission, where the group velocity and phase velocity for a wave point in opposite directions. Metamaterial resonators implemented with superconducting thin-film circuits provide a route to generating dense mode spectra in the microwave regime for coupling to qubits. In this thesis, we discuss the implementation of such superconducting metamaterial resonators. First, we derive the dispersion relation for one-dimensional metamaterial transmission lines and we describe the formation of resonators from such lines and their quality factors. Next, we describe the design and fabrication of transmission-line metamaterial resonators using superconducting thin films. We characterize the metamaterials through low-temperature microwave measurements as well as Laser Scanning Microscope (LSM) images of the microwave field distributions in the circuit. We compare these various measurements with numerical simulations of the microwave properties of the circuits, including simulated current density and charge density distributions for the excitation of different resonance modes. Following the successful realization of dense mode spectra in these circuits, we have initiated the first experiments with a superconducting transmon qubit coupled to a metamaterial resonator and we describe our progress in this direction.

•Jan 1, 2018•0 citations

Mode Structure in Superconducting Metamaterial Transmission-Line Resonators

H. Wang, Alexander P. Zhuravel, S. Indrajeet +8 more

Multimode microwave resonators that can be strongly coupled to superconducting qubits allow exploration of large-scale entanglement, or quantum simulations of many-body phenomena. Typically, long superconducting transmission lines or large arrays of transmission-line resonators are required. This work demonstrates superconducting metamaterial resonators with a dense mode spectrum above a low-frequency band gap. Imaging of the microwave fields shows that these devices exhibit a left-handed dispersion relation, consistent with modeling and simulations. This compact design is compatible with superconducting-qubit integration for applications in quantum information and communication.

arXiv:1812.02579•Physical Review Applied•May 22, 2019•29 citations

Coupling a Superconducting Qubit to a Left-Handed Metamaterial Resonator

S. Indrajeet, H. Wang, M.D. Hutchings +4 more

Metamaterial resonant structures made from arrays of superconducting lumped-circuit elements can exhibit microwave-mode spectra with left-handed dispersion for the standing-wave resonances, resulting in a high density of modes in the same frequency range where superconducting qubits are typically operated, as well as a bandgap at lower frequencies that extends down to dc. Using this regime for multimode circuit quantum electrodynamics, we perform a series of measurements of such a superconducting metamaterial resonator coupled to a flux-tunable transmon qubit. Through microwave measurements of the metamaterial, we observe the coupling of the qubit to each of the modes that it passes through. Using a separate readout resonator, we probe the qubit dispersively and characterize the qubit energy relaxation as a function of frequency, which is strongly affected by the Purcell effect in the presence of the dense mode spectrum. Additionally, we investigate the ac Stark shift of the qubit as the photon number in the various metamaterial modes is varied. Through numerical simulations, we explore designs based on this scheme with enhanced coupling so that the coupling energy between the qubit and the metamaterial modes can exceed the intermode spacing in future devices with achievable circuit parameters. The ability to tailor the dense mode spectrum through the choice of circuit parameters and manipulate the photonic state of the metamaterial through interactions with qubits makes this a promising platform for analog quantum simulation with microwave photons and quantum memories.

arXiv:2007.10932•Physical Review Applied•Dec 10, 2020•21 citations

Fabrication and Characterization of Superconducting Resonators

Giuseppe Cataldo, Emily M. Barrentine, Ari-David Brown +3 more

Superconducting microwave resonators are of interest for a wide range of applications, including for their use as microwave kinetic inductance detectors (MKIDs) for the detection of faint astrophysical signatures, as well as for quantum computing applications and materials characterization. In this paper, procedures are presented for the fabrication and characterization of thin-film superconducting microwave resonators. The fabrication methodology allows for the realization of superconducting transmission-line resonators with features on both sides of an atomically smooth single-crystal silicon dielectric. This work describes the procedure for the installation of resonator devices into a cryogenic microwave testbed and for cool-down below the superconducting transition temperature. The set-up of the cryogenic microwave testbed allows one to do careful measurements of the complex microwave transmission of these resonator devices, enabling the extraction of the properties of the superconducting lines and dielectric substrate (e.g., internal quality factors, loss and kinetic inductance fractions), which are important for device design and performance.

Journal of Visualized Experiments•May 21, 2016•3 citations

Experiments With Tunable Superconducting Metamaterials

Alexey Vladimirovich Ustinov

The paper reviews experiments with networks of compact thin-film superconducting microwave resonators. Superconducting circuits offer low loss properties, well-controlled nonlinearity, and frequency tunability in the microwave and mm-wave frequency ranges. An interesting spin-off of superconducting metamaterials is going to be quantum metamaterials comprised of arrays of superconducting qubits. This direction is an emerging new field for fundamental studies in quantum optics using microwaves.

IEEE Transactions on Terahertz Science and Technology•Jan 1, 2014•11 citations

Development of high quality superconducting resonators for quantum device applications

Dong-Gwang Ha, Seon Hoo Kim, So-Yeon Jun +5 more

We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•0 citations
Superconducting thin-film metamaterial resonators can provide a dense microwave mode spectrum with potential applications in quantum information science. We report on the fabrication and low-temperature measurement of metamaterial transmission-line resonators patterned from Al thin films. We also describe multiple approaches for numerical simulations of the microwave properties of these structures, along with comparisons with the measured transmission spectra. The ability to predict the mode spectrum based on the chip layout provides a path towards future designs integrating metamaterial resonators with superconducting qubits.
Superconducting circuits operated at low temperatures have led to rapid advances in quantum information processing as well as quantum optics in the microwave regime. Engineered quantum systems with a dense spectrum of modes coupled to artificial atoms, or qubits, formed from superconducting circuits offer an opportunity to explore large-scale entanglement or perform quantum simulations of many-body phenomena. Recent research efforts into artificial metamaterials have yielded microwave and optical systems with numerous counterintuitive properties, including left-handed transmission, where the group velocity and phase velocity for a wave point in opposite directions. Metamaterial resonators implemented with superconducting thin-film circuits provide a route to generating dense mode spectra in the microwave regime for coupling to qubits. In this thesis, we discuss the implementation of such superconducting metamaterial resonators. First, we derive the dispersion relation for one-dimensional metamaterial transmission lines and we describe the formation of resonators from such lines and their quality factors. Next, we describe the design and fabrication of transmission-line metamaterial resonators using superconducting thin films. We characterize the metamaterials through low-temperature microwave measurements as well as Laser Scanning Microscope (LSM) images of the microwave field distributions in the circuit. We compare these various measurements with numerical simulations of the microwave properties of the circuits, including simulated current density and charge density distributions for the excitation of different resonance modes. Following the successful realization of dense mode spectra in these circuits, we have initiated the first experiments with a superconducting transmon qubit coupled to a metamaterial resonator and we describe our progress in this direction.
Multimode microwave resonators that can be strongly coupled to superconducting qubits allow exploration of large-scale entanglement, or quantum simulations of many-body phenomena. Typically, long superconducting transmission lines or large arrays of transmission-line resonators are required. This work demonstrates superconducting metamaterial resonators with a dense mode spectrum above a low-frequency band gap. Imaging of the microwave fields shows that these devices exhibit a left-handed dispersion relation, consistent with modeling and simulations. This compact design is compatible with superconducting-qubit integration for applications in quantum information and communication.
Metamaterial resonant structures made from arrays of superconducting lumped-circuit elements can exhibit microwave-mode spectra with left-handed dispersion for the standing-wave resonances, resulting in a high density of modes in the same frequency range where superconducting qubits are typically operated, as well as a bandgap at lower frequencies that extends down to dc. Using this regime for multimode circuit quantum electrodynamics, we perform a series of measurements of such a superconducting metamaterial resonator coupled to a flux-tunable transmon qubit. Through microwave measurements of the metamaterial, we observe the coupling of the qubit to each of the modes that it passes through. Using a separate readout resonator, we probe the qubit dispersively and characterize the qubit energy relaxation as a function of frequency, which is strongly affected by the Purcell effect in the presence of the dense mode spectrum. Additionally, we investigate the ac Stark shift of the qubit as the photon number in the various metamaterial modes is varied. Through numerical simulations, we explore designs based on this scheme with enhanced coupling so that the coupling energy between the qubit and the metamaterial modes can exceed the intermode spacing in future devices with achievable circuit parameters. The ability to tailor the dense mode spectrum through the choice of circuit parameters and manipulate the photonic state of the metamaterial through interactions with qubits makes this a promising platform for analog quantum simulation with microwave photons and quantum memories.
Superconducting microwave resonators are of interest for a wide range of applications, including for their use as microwave kinetic inductance detectors (MKIDs) for the detection of faint astrophysical signatures, as well as for quantum computing applications and materials characterization. In this paper, procedures are presented for the fabrication and characterization of thin-film superconducting microwave resonators. The fabrication methodology allows for the realization of superconducting transmission-line resonators with features on both sides of an atomically smooth single-crystal silicon dielectric. This work describes the procedure for the installation of resonator devices into a cryogenic microwave testbed and for cool-down below the superconducting transition temperature. The set-up of the cryogenic microwave testbed allows one to do careful measurements of the complex microwave transmission of these resonator devices, enabling the extraction of the properties of the superconducting lines and dielectric substrate (e.g., internal quality factors, loss and kinetic inductance fractions), which are important for device design and performance.
We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.