Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1503.08752 · Scientific Reports

Tunable Bistability in Hybrid Bose-Einstein Condensate Optomechanics

Kashif Ammar Yasir, Wu-Ming Liu

Published Jun 2, 2015• 44 citations
arXivHTMLPDF

Abstract

Cavity-optomechanics, a rapidly developing area of research, has made a remarkable progress. A stunning manifestation of optomechanical phenomena is in exploiting the mechanical effects of light to couple the optical degree of freedom with mechanical degree of freedom. In this report, we investigate the controlled bistable dynamics of such hybrid optomechanical system composed of cigar-shaped Bose-Einstein condensate (BEC) trapped inside high-finesse optical cavity with one moving-end mirror and is driven by a single mode optical field. The numerical results provide evidence for controlled optical bistability in optomechanics using transverse optical field which directly interacts with atoms causing the coupling of transverse field with momentum side modes, exited by intra-cavity field. This technique of transverse field coupling is also used to control bistable dynamics of both moving-end mirror and BEC. The report provides an understanding of temporal dynamics of moving-end mirror and BEC with respect to transverse field. Moreover, dependence of effective potential of the system on transverse field has also been discussed. To observe this phenomena in laboratory, we have suggested a certain set of experimental parameters. These findings provide a platform to investigate the tunable behavior of novel phenomenon like electromagnetically induced transparency and entanglement in hybrid systems.

DOI
10.1038/srep10612

Related papers

Controlled Electromagnetically Induced Transparency and Fano Resonances in Hybrid BEC-Optomechanics

Kashif Ammar Yasir, Wu-Ming Liu

Cavity-optomechanics, a tool to manipulate mechanical effects of light to couple optical field with other physical objects, is the subject of increasing investigations, especially with regards to electromagnetically induced transparency (EIT). EIT, a result of Fano interference among different atomic transition levels, has acquired a significant importance in many areas of physics, such as atomic physics and quantum optics. However, controllability of such multi-dimensional systems has remained a crucial issue. In this report, we investigate the controllability of EIT and Fano resonances in hybrid optomechanical system composed of cigar-shaped Bose-Einstein condensate (BEC), trapped inside high-finesse Fabry-Pérot cavity with one vibrational mirror, driven by a single mode optical field and a transverse pump field. The transverse field is used to control the phenomenon of EIT. It is detected that the strength of transverse field is not only efficiently amplifying or attenuating out-going optical mode but also providing an opportunity to enhance the strength of Fano-interactions which leads to the amplification of EIT-window. To observe these phenomena in laboratory, we suggest a certain set of experimental parameters. The results provide a route for tunable manipulation of optical phenomena, like EIT, which could be a significant step in quantum engineering.

arXiv:1504.06693•Scientific Reports•Mar 9, 2016•62 citations

Controllable Four-Wave Mixing Based on Hybrid BEC-Optomechanical Systems

L.W. Liu, Duojie Gengzang, Y.Q. Shi +3 more

We theoretically investigate the four-wave mixing (FWM) process based on hybrid optomechanical systems consisting of a cigar-shaped Bose-Einstein condensate (BEC), trapped inside an optical cavity with a moving endmirror.We can use a strong control field driving the cavity to control the bistable behavior of the steady-state photon number, the phonon number of the collective oscillation of the BEC and the phonon number of the mechanical resonator.Furthermore, we show how optomechanically induced transparency (OMIT) in the hybrid optomechanical systems can be used to control the four-wave mixing and enhance the intensity of the four-wave mixing.The calculated results show that the effect of the four-wave mixing can be controlled effectively by the pump strength, the frequency difference between the BEC and the moving end mirror, cavity decay rate, and effective coupling strength of the optical field with the moving mirror.Finally, the number peak of FWM can be controlled by modulating the frequency difference between the BEC and the moving end mirror and effective coupling strength of the optical field with the moving mirror.

Acta Physica Polonica A•Sep 1, 2019•5 citations

Controllability of optical bistability, cooling and entanglement in hybrid cavity optomechanical systems by nonlinear atom-atom interaction

Dalafi, A., Naderi, M. H., Soltanolkotabi, M. +1 more

We investigate the effects of atomic collisions as well as optomechanical mirror–field coupling on the optical bistability in a hybrid system consisting of a Bose–Einstein condensate inside a driven optical cavity with a moving end mirror. It is shown that the bistability of the system can be controlled by the s-wave scattering frequency which can provide the possibility of realizing a controllable optical switch. On the other hand, by studying the effect of the Bogoliubov mode, as a secondary mechanical mode relative to the mirror vibrations, on the cooling process as well as the bipartite mirror–field and atom–field entanglements we find an interpretation for the cooling of the Bogoliubov mode. The advantage of this hybrid system in comparison to the bare optomecanical cavity with a two-mode moving mirror is the controllability of the frequency of the secondary mode through the s-wave scattering interaction.

•Jan 1, 2013•40 citations

Hamiltonian chaos in a coupled BEC–optomechanical-cavity system

K. Zhang, W. Chen, Mishkatul Bhattacharya +1 more

We present a theoretical study of a hybrid optomechanical system consisting of a Bose-Einstein condensate (BEC) trapped inside a single-mode optical cavity with a moving end mirror. The intracavity light field has a dual role: it excites a momentum side mode of the condensate, and acts as a nonlinear spring that couples the vibrating mirror to that collective density excitation. We present the dynamics in a regime where the intracavity optical field, the mirror, and the side-mode excitation all display bistable behavior. In this regime we find that the dynamics of the system exhibits Hamiltonian chaos for appropriate initial conditions.

arXiv:0909.5465•Physical Review A•Jan 5, 2010•106 citations

Controllability of optical bistability, cooling and entanglement in hybrid cavity optomechanical systems by nonlinear atom–atom interaction

A Dalafi, M H Naderi, M Soltanolkotabi +1 more

We investigate the effects of atomic collisions as well as optomechanical mirror–field coupling on the optical bistability in a hybrid system consisting of a Bose–Einstein condensate inside a driven optical cavity with a moving end mirror. It is shown that the bistability of the system can be controlled by the s-wave scattering frequency which can provide the possibility of realizing a controllable optical switch. On the other hand, by studying the effect of the Bogoliubov mode, as a secondary mechanical mode relative to the mirror vibrations, on the cooling process as well as the bipartite mirror–field and atom–field entanglements we find an interpretation for the cooling of the Bogoliubov mode. The advantage of this hybrid system in comparison to the bare optomecanical cavity with a two-mode moving mirror is the controllability of the frequency of the secondary mode through the s-wave scattering interaction.

arXiv:1304.4708•Journal of Physics B Atomic Molecular and Optical Physics•Nov 11, 2013•44 citations

A tunable single-photon multi-channel quantum router in a hybrid BEC-optomechanical system

Liwei Liu, Guoheng Zhang, Xiu-Jia An +3 more

Abstract A novel technique for generating a single-photon multi-channel quantum router in a hybrid BEC-optomechanical system is proposed. This system consists of a cigar-shaped Bose–Einstein condensate that is trapped inside a high-finesse Fabry–Pérot cavity with a moving end-mirror. Analytical solutions are given for the spectrum of the reflectance and transmittance of the output field. When the cavity is driven by a coupling laser and probe laser, we can produce a switch for the appropriate of the normalized frequency and the effective coupling strength. Furthermore, the effective coupling strength of the optical field with the condensate mode, the effective coupling strength of the optical field with the mirror, cavity decay and decay rates for the moving mirror are used to control the number of the single-photon quantum router. Finally, we also demonstrate the vacuum, and thermal noise can be insignificant for the single-photon router. We give a certain set of experimental parameters for observing these phenomena in the laboratory. The technique presented may have potential applications in quantum engineering and quantum information networks.

Laser Physics•Apr 11, 2019•1 citation
Cavity-optomechanics, a rapidly developing area of research, has made a remarkable progress. A stunning manifestation of optomechanical phenomena is in exploiting the mechanical effects of light to couple the optical degree of freedom with mechanical degree of freedom. In this report, we investigate the controlled bistable dynamics of such hybrid optomechanical system composed of cigar-shaped Bose-Einstein condensate (BEC) trapped inside high-finesse optical cavity with one moving-end mirror and is driven by a single mode optical field. The numerical results provide evidence for controlled optical bistability in optomechanics using transverse optical field which directly interacts with atoms causing the coupling of transverse field with momentum side modes, exited by intra-cavity field. This technique of transverse field coupling is also used to control bistable dynamics of both moving-end mirror and BEC. The report provides an understanding of temporal dynamics of moving-end mirror and BEC with respect to transverse field. Moreover, dependence of effective potential of the system on transverse field has also been discussed. To observe this phenomena in laboratory, we have suggested a certain set of experimental parameters. These findings provide a platform to investigate the tunable behavior of novel phenomenon like electromagnetically induced transparency and entanglement in hybrid systems.
Cavity-optomechanics, a tool to manipulate mechanical effects of light to couple optical field with other physical objects, is the subject of increasing investigations, especially with regards to electromagnetically induced transparency (EIT). EIT, a result of Fano interference among different atomic transition levels, has acquired a significant importance in many areas of physics, such as atomic physics and quantum optics. However, controllability of such multi-dimensional systems has remained a crucial issue. In this report, we investigate the controllability of EIT and Fano resonances in hybrid optomechanical system composed of cigar-shaped Bose-Einstein condensate (BEC), trapped inside high-finesse Fabry-Pérot cavity with one vibrational mirror, driven by a single mode optical field and a transverse pump field. The transverse field is used to control the phenomenon of EIT. It is detected that the strength of transverse field is not only efficiently amplifying or attenuating out-going optical mode but also providing an opportunity to enhance the strength of Fano-interactions which leads to the amplification of EIT-window. To observe these phenomena in laboratory, we suggest a certain set of experimental parameters. The results provide a route for tunable manipulation of optical phenomena, like EIT, which could be a significant step in quantum engineering.
We theoretically investigate the four-wave mixing (FWM) process based on hybrid optomechanical systems consisting of a cigar-shaped Bose-Einstein condensate (BEC), trapped inside an optical cavity with a moving endmirror.We can use a strong control field driving the cavity to control the bistable behavior of the steady-state photon number, the phonon number of the collective oscillation of the BEC and the phonon number of the mechanical resonator.Furthermore, we show how optomechanically induced transparency (OMIT) in the hybrid optomechanical systems can be used to control the four-wave mixing and enhance the intensity of the four-wave mixing.The calculated results show that the effect of the four-wave mixing can be controlled effectively by the pump strength, the frequency difference between the BEC and the moving end mirror, cavity decay rate, and effective coupling strength of the optical field with the moving mirror.Finally, the number peak of FWM can be controlled by modulating the frequency difference between the BEC and the moving end mirror and effective coupling strength of the optical field with the moving mirror.
We investigate the effects of atomic collisions as well as optomechanical mirror–field coupling on the optical bistability in a hybrid system consisting of a Bose–Einstein condensate inside a driven optical cavity with a moving end mirror. It is shown that the bistability of the system can be controlled by the s-wave scattering frequency which can provide the possibility of realizing a controllable optical switch. On the other hand, by studying the effect of the Bogoliubov mode, as a secondary mechanical mode relative to the mirror vibrations, on the cooling process as well as the bipartite mirror–field and atom–field entanglements we find an interpretation for the cooling of the Bogoliubov mode. The advantage of this hybrid system in comparison to the bare optomecanical cavity with a two-mode moving mirror is the controllability of the frequency of the secondary mode through the s-wave scattering interaction.
We present a theoretical study of a hybrid optomechanical system consisting of a Bose-Einstein condensate (BEC) trapped inside a single-mode optical cavity with a moving end mirror. The intracavity light field has a dual role: it excites a momentum side mode of the condensate, and acts as a nonlinear spring that couples the vibrating mirror to that collective density excitation. We present the dynamics in a regime where the intracavity optical field, the mirror, and the side-mode excitation all display bistable behavior. In this regime we find that the dynamics of the system exhibits Hamiltonian chaos for appropriate initial conditions.
We investigate the effects of atomic collisions as well as optomechanical mirror–field coupling on the optical bistability in a hybrid system consisting of a Bose–Einstein condensate inside a driven optical cavity with a moving end mirror. It is shown that the bistability of the system can be controlled by the s-wave scattering frequency which can provide the possibility of realizing a controllable optical switch. On the other hand, by studying the effect of the Bogoliubov mode, as a secondary mechanical mode relative to the mirror vibrations, on the cooling process as well as the bipartite mirror–field and atom–field entanglements we find an interpretation for the cooling of the Bogoliubov mode. The advantage of this hybrid system in comparison to the bare optomecanical cavity with a two-mode moving mirror is the controllability of the frequency of the secondary mode through the s-wave scattering interaction.
Abstract A novel technique for generating a single-photon multi-channel quantum router in a hybrid BEC-optomechanical system is proposed. This system consists of a cigar-shaped Bose–Einstein condensate that is trapped inside a high-finesse Fabry–Pérot cavity with a moving end-mirror. Analytical solutions are given for the spectrum of the reflectance and transmittance of the output field. When the cavity is driven by a coupling laser and probe laser, we can produce a switch for the appropriate of the normalized frequency and the effective coupling strength. Furthermore, the effective coupling strength of the optical field with the condensate mode, the effective coupling strength of the optical field with the mirror, cavity decay and decay rates for the moving mirror are used to control the number of the single-photon quantum router. Finally, we also demonstrate the vacuum, and thermal noise can be insignificant for the single-photon router. We give a certain set of experimental parameters for observing these phenomena in the laboratory. The technique presented may have potential applications in quantum engineering and quantum information networks.