Quantum networking based on optical Gaussian states, although promising in terms of scalability, is hindered by the fact that their entanglement cannot be distilled via Gaussian operations. We show that optomechanics, and particularly the possibility to measure the mechanical degree of freedom in an integrable system, can address this problem. Here, one of the optical modes of a two-mode squeezed vacuum is injected into a single-sided Fabry-P\'erot cavity and nonlinearly coupled to a mechanical oscillator. Afterwards, the position of the oscillator is measured using pulsed optomechanics and homodyne detection. We show that this measurement can supply non-Gaussian entangled states frequently enough to enable scalable entanglement distillation. Moreover, it can conditionally increase the initial entanglement under an optimal radiation-pressure interaction strength, which corresponds to an effective unsharp measurement of the photon number inside the cavity. We show how the resulting entanglement enhancement can be verified by using a standard teleportation procedure.
Quantum networking based on optical Gaussian states, although promising in terms of scalability, is hindered by the fact that their entanglement cannot be distilled via Gaussian operations. We show that optomechanics, and particularly the possibility to measure the mechanical degree of freedom in an integrable system, can address this problem. Here, one of the optical modes of a two-mode squeezed vacuum is injected into a single-sided Fabry-P'erot cavity and nonlinearly coupled to a mechanical oscillator. Afterwards, the position of the oscillator is measured using pulsed optomechanics and homodyne detection. We show that this measurement can supply non-Gaussian entangled states frequently enough to enable scalable entanglement distillation. Moreover, it can conditionally increase the initial entanglement under an optimal radiation-pressure interaction strength, which corresponds to an effective unsharp measurement of the photon number inside the cavity. We show how the resulting entanglement enhancement can be verified by using a standard teleportation procedure.
Quantum technologies based on optical Gaussian states have proven very promising in terms of scalability. However, their use in quantum networking is hindered by the fact that Gaussian entanglement cannot be distilled via Gaussian operations. We take advantage of hybrid optomechanical systems to address this problem, proposing a scheme to distill optical two-mode squeezed vacua via unsharp measurements. Here, one of the optical modes is injected into a single sided Fabry-P\'{e}rot cavity and non-linearly coupled to a mechanical oscillator. Afterwards, the position of the oscillator is measured using pulsed optomechanics and homodyne detection. Our results show that this measurement can conditionally increase the initial entanglement under an optimal radiation-pressure interaction strength, which corresponds to an effective unsharp non-Gaussian measurement of the photon number inside the cavity. We show how the resulting entanglement distillation can be verified by using a standard quantum teleportation procedure.
Non-relativistic quantum mechanics have proven to be a significant framework to understand the non-classical behaviour of light and the microcosmos. Perhaps, one of the first technological revolutions within quantum theory came with the invention of the transistor, whereby a purely quantum mechanical description was required. Currently, another outstanding revolution is taking place in a crossroad where information science meets quantum mechanics (this being the quantum information field). Such an area of work contemplates both the fascinating theoretical aspect of quantum correlations, as well as implementations towards quantum tasks performed by a universal quantum computer; tasks that cannot be realised (or they are hard to implement) within the classical domain. This Thesis is devoted to study the dynamics of quantum entanglement in spin-optomechanics systems. In particular, we explore the quantum stabilization of quantum entanglement, a quantum concentration scheme in opto-mechanics and an interfacing of matter and light towards quantum networking applications. Additionally, we also investigate theoretical aspects of quantum correlations within thermal environments, as well as the topical area of quantum sudden transitions. In Chapter 1, we provide a brief summary of quantum information and of the quantum optics framework to cover elementary concepts and techniques used subsequently in this work. Subsequently, in Chapter 2 we present the stabilization of quantum entanglement in a non-linear qubit-oscillator system. The inclusion of a modest nonlinearity gives three results, i) the loss of periodicity of the system, ii) the occurrence of quadrature squeezing appearing for a short time, and iii) the quantum entanglement reaches higher values in contrast to the case without non-linearity. In Chapter 3, a technique to concentrate/distill a two-mode vacuum state in optomechanics via unsharp measurements is presented. Here, one of the optical modes is injected into a cavity at first, and thereafter, it is nonlinearly coupled to a mechanical oscillator. Afterwards, the position of the oscillator is measured using pulsed optomechanics and homodyne detection. The results show that this measurement can conditionally increase the initial entanglement. Next, in Chapter 4, stimulated by optomechanical transducers and quantum networking, a light-matter system is constructed where a qubit is coupled to a cavity mode mediated through a mechanical oscillator. The qubit-oscillator conditionally displaced Hamiltonian and the oscillator-cavity radiation-pressure interaction generate a maximal qubit-cavity entanglement. Additionally, we consider the case in which the cavity mode is coupled to a waveguide, numerical calculations show a promising qubit-fibre entanglement under a weak matter-light coupling. For the quantum network case, we coupled a generic qubit in the first node to a second qubit-cavity distant Jaynes-Cummings system coupled through an optical fibre, where qubit-qubit correlations can be achieved in the quantum open systems scenario. In Chapter 5, we study the evolution of an open quantum system within the Born-Markov microscopic master equation (MME). Essentially, two distant two-level atoms are trapped in fibre-coupled cavities. Under the approximation of one-excitation allowed in the atom-cavity-fibre basis, we can obtain quantum correlations induced by thermal fluctuations from the environments. Lastly, in Chapter 6, we bring together previously elements explored in this Thesis. The system is a hybrid atomic-mechanical system formed from two remote qubits interacting with individual harmonic oscillators. This system, as in Chapter 4, explores interesting applications in quantum networking schemes. The two qubits are initially prepared in a Bell-diagonal state, and consequently the two-qubit correlations exhibit few interesting effects such as freezing, sudden changes and revivals in the evolution of the quantum entropic discord. To conclude, I summarize my findings in Chapter 7.
Cavity quantum optomechanics has emerged as a new platform for quantum science and technology and has applications ranging from quantum-information processing to tests of the foundations of physics. Of crucial importance for optomechanics is the generation and verification of non-Gaussian states of motion and a key outstanding challenge is the observation of a canonical two-mode Schrodinger-cat state in the displacement of two mechanical oscillators. In this work, we introduce a protocol that utilizes the nonlinearity of the radiation-pressure interaction combined with photon-counting measurements to generate this bipartite non-Gaussian mechanical state. Our protocol employs short optical pulses to both generate the mechanical quantum state, and to then measure arbitrary mechanical quadrature moments, which we utilize to verify the non-Gaussian entanglement. Our entanglement-verification procedure can be used to evaluate an entire class of inseparability criteria and also provides a route for experimental characterisation of a broad range of single- and multi-partite mechanical states. Key experimental factors, such as optical loss and mechanical decoherence, are carefully analyzed and we show that the scheme is feasible with only minor improvements to current experiments that operate outside the resolved-sideband regime. Our scheme provides a new avenue for quantum experiments with entangled mechanical oscillators and offers significant potential for further research and development that utilizes such non-Gaussian states for quantum-information and sensing applications, and for studying the quantum-to-classical transition.
Abstract Cavity quantum optomechanics has emerged as a new platform for quantum science and technology with applications ranging from quantum-information processing to tests of the foundations of physics. Of crucial importance for optomechanics is the generation and verification of non-Gaussian states of motion and a key outstanding challenge is the observation of a canonical two-mode Schrödinger-cat state in the displacement of two mechanical oscillators. In this work, we introduce a pulsed approach that utilizes the nonlinearity of the radiation–pressure interaction combined with photon-counting measurements to generate this entangled non-Gaussian mechanical state, and, importantly, describe a protocol using subsequent pulsed interactions to verify the non-Gaussian entanglement generated. Our pulsed verification protocol allows quadrature moments of the two mechanical oscillators to be measured up to any finite order providing a toolset for experimental characterisation of bipartite mechanical quantum states and allowing a broad range of inseparability criteria to be evaluated. Key experimental factors, such as optical loss and open-system dynamics, are carefully analyzed and we show that the scheme is feasible with only minor improvements to current experiments that operate outside the resolved-sideband regime. Our scheme provides a new avenue for quantum experiments with entangled mechanical oscillators and offers significant potential for further research and development that utilizes such non-Gaussian states for quantum-information and sensing applications, and for studying the quantum-to-classical transition.
In a nutshell, a cavity optomechanical system consists of a mechanical oscillator inside an optical cavity. Cavity optomechanics studies the interplay between the light-matter radiation-pressure interaction and the change in the cavity frequency induced by mechanical motion. By leveraging the tools of quantum optics and quantum measurement, cavity quantum optomechanics enables the engineering of nonclassical quantum states of bulk matter. In this thesis, I present protocols for engineering such nonclassical quantum states in Part II. First, I introduce a scheme to ‘grow’ a quantum kitten state of a mechanical oscillator into a macroscopic Schrödinger cat state using a series of nonlinear pulsed optomechanical interactions. Next, I detail our proposed schemes to generate and verify entanglement between two mechanical oscillators. Moving on from pulsed optomechanics, I describe the theory behind an experiment that achieved multi-phonon subtraction from a mechanical oscillator in a continuously driven Brillouin optomechanical system. In the final chapter of Part II, I provide a theoretical preview of an experiment that investigates the behaviour of the mechanical oscillator when no light is detected at the output. In Part III, I introduce a new framework for nonlinear cavity quantum optomechanics that incorporates the intrinsic nonlinearity of the radiation-pressure interaction, the nonlinearity from the cavity enhancement, and higher-order mechanical position terms in the expansion of the cavity frequency. I then propose a scheme for measuring mechanical position using general-dyne detection, applicable to pulsed and continuous measurements. This predicts a new regime of operation, the “stochastic Gaussian” regime. Finally, I discuss a protocol for deterministic mechanical squeezing that utilizes the cavity response.
Entanglement had played a crucial role in developing frontier technologies as a critical resource, for instance, in quantum teleportation and quantum sensing schemes. Notably, thanks to the ability to cool down the vibrational modes of mechanical oscillators to its quantum regime, entanglement between mechanical modes and the production of nonclassical mechanical states have emerged as central resources for quantum technological applications. Thus, proposing deterministic schemes to achieve those tasks is of paramount importance. While the dominant scheme for bipartite mechanical entanglement involves Gaussian optomechanical interactions (linearized regime) to generate two-mode squeezed vacuum states, entangling two-modes exploiting the bare non-Gaussian optomechanical interaction (nonlinear strong single-photon regime) remains less covered. This work proposes an on-demand scheme to engineer phononic non-Gaussian bipartite entanglement in the nonlinear regime by exploiting cavity dissipation. Interestingly, our protocol (operating in the resolved sideband and photon blockade regime) renders the possibility of achieving a high degree of steady-state entanglement. We further show that our deterministic scheme is robust in the presence of decoherence and temperature within state-of-the-art optomechanics, along with the required conditions to obtain non-Gaussianity of the achieved bipartite mechanical steady-state.