Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1502.06423 · Physical Review Letters

Intracavity Squeezing Can Enhance Quantum-Limited Optomechanical Position Detection through Deamplification

Vittorio Peano, Harald G. L. Schwefel, Christoph Marquardt, Florian Marquardt

Published Dec 9, 2015• 158 citations
arXivHTMLPDF

Abstract

It has been predicted and experimentally demonstrated that by injecting squeezed light into an optomechanical device, it is possible to enhance the precision of a position measurement. Here, we present a fundamentally different approach where the squeezing is created directly inside the cavity by a nonlinear medium. Counterintuitively, the enhancement of the signal-to-noise ratio works by deamplifying precisely the quadrature that is sensitive to the mechanical motion without losing quantum information. This enhancement works for systems with a weak optomechanical coupling and/or strong mechanical damping. This can allow for larger mechanical bandwidth of quantum-limited detectors based on optomechanical devices. Our approach can be straightforwardly extended to quantum nondemolition qubit detection.

DOI
10.1103/physrevlett.115.243603

Related papers

Beating the Standard Sensitivity-Bandwidth Limit of Cavity-Enhanced Interferometers with Internal Squeezed-Light Generation

M. Korobko, L. Kleybolte, S. Ast +3 more

The shot-noise limited peak sensitivity of cavity-enhanced interferometric measurement devices, such as gravitational-wave detectors, can be improved by increasing the cavity finesse, even when comparing fixed intracavity light powers. For a fixed light power inside the detector, this comes at the price of a proportional reduction in the detection bandwidth. High sensitivity over a large span of signal frequencies, however, is essential for astronomical observations. It is possible to overcome this standard sensitivity-bandwidth limit using nonclassical correlations in the light field. Here, we investigate the internal squeezing approach, where the parametric amplification process creates a nonclassical correlation directly inside the interferometer cavity. We theoretically analyze the limits of the approach and measure 36% increase in the sensitivity-bandwidth product compared to the classical case. To our knowledge, this is the first experimental demonstration of an improvement in the sensitivity-bandwidth product using internal squeezing, opening the way for a new class of optomechanical force sensing devices.

arXiv:1702.01044•Physical Review Letters•Apr 7, 2017•53 citations

Squeezing-enhanced quantum sensing with quadratic optomechanics

Sheng-Dian Zhang, Jie Wang, Qian Zhang +6 more

Cavity optomechanical (COM) sensors, enhanced by quantum squeezing or entanglement, have become powerful tools for measuring ultra-weak forces with high precision and sensitivity. However, these sensors usually rely on linear COM couplings, a fundamental limitation when measurements of the mechanical energy are desired. Very recently, a giant enhancement of the signal-to-noise ratio was predicted in a quadratic COM system. Here we show that the performance of such a system can be further improved surpassing the standard quantum limit by using quantum squeezed light. Our approach is compatible with available engineering techniques of advanced COM sensors and provides new opportunities for using COM sensors in tests of fundamental laws of physics and quantum metrology applications.

arXiv:2202.08690•Optica Quantum•Jun 7, 2024•27 citations

Ultrasensitive displacement measurement with nonlinear optomechanical coupling and squeezed light injection

Doudou Wang, Quansen Wang, Qiang Zhang +1 more

We propose an ultrasensitive displacement measurement scheme to overcome the standard quantum limit (SQL) in the unresolved sideband cavity optomechanical system with nonlinear optomechanical coupling and squeezed light injection. By introducing the optimized quantum correlation, which is enabled by suitable choices of the squeezing angle, squeezing level, power of the probe light, and measurement angle of homodyne detection, the off-resonant displacement sensitivity reaches 6 dB below the SQL in linear optomechanical coupling. In contrast, displacement sensitivities with a coherent probe plus variational readout and squeezed probe plus fixed measurement angle (phase quadrature) are 2.6 dB and 4.6 dB below the SQL, respectively. By combining linear and quadratic optomechanical coupling, we show that the displacement sensitivity can be further improved to 9.6 dB below the SQL. Our results have potential applications in gravitational-wave detectors, quantum metrology, and the search for dark matter.

Journal of the Optical Society of America B•Jan 13, 2023•4 citations

Squeezing enhanced homodyne weak force sensing in cavity optomechanics

Madan Mohan Mahana, Sanket Das, Tarak Nath Dey

Cavity optomechanical systems have emerged as a promising platform for quantum sensing. Quantum mechanics imposes a standard quantum limit (SQL) on the force-sensitivity for the standard homodyne phase quadrature measurement of the cavity's output field. In this paper, we investigate ways to enhance weak force sensitivity beyond SQL by employing a variational homodyne quadrature readout and quantum squeezing. Our study reveals a remarkable improvement in the force sensitivity of a cavity optomechanical sensor at a suitable homodyne angle, compared with standard phase quadrature detection of the cavity output field within a specific frequency band. We further demonstrate improved force sensitivity via intra-cavity squeezing (ICS) or injected external squeezing (IES) of the cavity mode. Both variational homodyne readout and quantum squeezing induce quantum correlations between the amplitude and phase quadratures of the cavity's output field, thereby improving force sensitivity. Our results suggest that IES is preferable to ICS for sub-SQL force sensing with system stability and lower probe power requirements. The squeezing-enhanced variational homodyne detection scheme can enable high-precision quantum sensing across various hybrid quantum platforms.

quant-pharXiv:2606.28007•Jun 29, 2026•0 citations

Combining quantum noise reduction resources: A practical approach

Sohitri Ghosh, Matthew A. Feldman, Seongjin Hong +4 more

Optomechanical sensors are capable of transducing external perturbations to resolvable optical signals. A particular regime of interest is that of high-bandwidth force detection, where an impulse is delivered to the system over a short period of time. Exceedingly sensitive impulse detection has been proposed to observe very weak signals like those due to long-range interactions with dark matter that require much higher sensitivities than current sensors can provide. Quantum resources to go beyond the traditional standard quantum limit of these sensors include squeezing of the light used to transduce the signal, backaction evasion by measuring the optimal quadrature, and quantum nondemolition (QND) measurements that reduce backaction directly. These methods have been developed in the context of gravitational wave detection for target frequencies in the audio band range. Here, we provide the theoretical limits to quantum noise reduction for higher and broader frequency targets, such as those from dark matter signals, while combining quantum-enhanced readout techniques based on squeezed light and QND measurements with optomechanical sensors. We demonstrate that backaction evasion through QND techniques dramatically reduces the technical challenges presented when using squeezed light for broadband force detection, paving the way for combining multiple quantum noise reduction techniques for enhanced sensitivity in the context of impulse metrology.

arXiv:2211.14460•Physical Review A•Jun 26, 2025•1 citation

Squeezing-enhanced measurement sensitivity in a cavity optomechanical system

Hugo Kerdoncuff, Ulrich B. Hoff, Glen I. Harris +2 more

We determine the theoretical limits to squeezing-enhanced measurement sensitivity of mechanical motion in a cavity optomechanical system. The motion of a mechanical resonator is transduced onto quadrature fluctuations of a cavity optical field and a measurement is performed on the optical field exiting the cavity. We compare measurement sensitivities obtained with coherent probing and quantum-enhanced probing of the mechanical motion, i.e. the coherent probe field carries vacuum states and quadrature squeezed vacuum states at sideband frequencies, respectively. We find that quantum-enhanced probing provides little to no improvement in motion sensing for resonators in the unresolved sideband regime but may significantly increase measurement sensitivities for resonators in the resolved sideband regime.

•Jan 1, 2015•7 citations
It has been predicted and experimentally demonstrated that by injecting squeezed light into an optomechanical device, it is possible to enhance the precision of a position measurement. Here, we present a fundamentally different approach where the squeezing is created directly inside the cavity by a nonlinear medium. Counterintuitively, the enhancement of the signal-to-noise ratio works by deamplifying precisely the quadrature that is sensitive to the mechanical motion without losing quantum information. This enhancement works for systems with a weak optomechanical coupling and/or strong mechanical damping. This can allow for larger mechanical bandwidth of quantum-limited detectors based on optomechanical devices. Our approach can be straightforwardly extended to quantum nondemolition qubit detection.
The shot-noise limited peak sensitivity of cavity-enhanced interferometric measurement devices, such as gravitational-wave detectors, can be improved by increasing the cavity finesse, even when comparing fixed intracavity light powers. For a fixed light power inside the detector, this comes at the price of a proportional reduction in the detection bandwidth. High sensitivity over a large span of signal frequencies, however, is essential for astronomical observations. It is possible to overcome this standard sensitivity-bandwidth limit using nonclassical correlations in the light field. Here, we investigate the internal squeezing approach, where the parametric amplification process creates a nonclassical correlation directly inside the interferometer cavity. We theoretically analyze the limits of the approach and measure 36% increase in the sensitivity-bandwidth product compared to the classical case. To our knowledge, this is the first experimental demonstration of an improvement in the sensitivity-bandwidth product using internal squeezing, opening the way for a new class of optomechanical force sensing devices.
Cavity optomechanical (COM) sensors, enhanced by quantum squeezing or entanglement, have become powerful tools for measuring ultra-weak forces with high precision and sensitivity. However, these sensors usually rely on linear COM couplings, a fundamental limitation when measurements of the mechanical energy are desired. Very recently, a giant enhancement of the signal-to-noise ratio was predicted in a quadratic COM system. Here we show that the performance of such a system can be further improved surpassing the standard quantum limit by using quantum squeezed light. Our approach is compatible with available engineering techniques of advanced COM sensors and provides new opportunities for using COM sensors in tests of fundamental laws of physics and quantum metrology applications.
We propose an ultrasensitive displacement measurement scheme to overcome the standard quantum limit (SQL) in the unresolved sideband cavity optomechanical system with nonlinear optomechanical coupling and squeezed light injection. By introducing the optimized quantum correlation, which is enabled by suitable choices of the squeezing angle, squeezing level, power of the probe light, and measurement angle of homodyne detection, the off-resonant displacement sensitivity reaches 6 dB below the SQL in linear optomechanical coupling. In contrast, displacement sensitivities with a coherent probe plus variational readout and squeezed probe plus fixed measurement angle (phase quadrature) are 2.6 dB and 4.6 dB below the SQL, respectively. By combining linear and quadratic optomechanical coupling, we show that the displacement sensitivity can be further improved to 9.6 dB below the SQL. Our results have potential applications in gravitational-wave detectors, quantum metrology, and the search for dark matter.
Cavity optomechanical systems have emerged as a promising platform for quantum sensing. Quantum mechanics imposes a standard quantum limit (SQL) on the force-sensitivity for the standard homodyne phase quadrature measurement of the cavity's output field. In this paper, we investigate ways to enhance weak force sensitivity beyond SQL by employing a variational homodyne quadrature readout and quantum squeezing. Our study reveals a remarkable improvement in the force sensitivity of a cavity optomechanical sensor at a suitable homodyne angle, compared with standard phase quadrature detection of the cavity output field within a specific frequency band. We further demonstrate improved force sensitivity via intra-cavity squeezing (ICS) or injected external squeezing (IES) of the cavity mode. Both variational homodyne readout and quantum squeezing induce quantum correlations between the amplitude and phase quadratures of the cavity's output field, thereby improving force sensitivity. Our results suggest that IES is preferable to ICS for sub-SQL force sensing with system stability and lower probe power requirements. The squeezing-enhanced variational homodyne detection scheme can enable high-precision quantum sensing across various hybrid quantum platforms.
Optomechanical sensors are capable of transducing external perturbations to resolvable optical signals. A particular regime of interest is that of high-bandwidth force detection, where an impulse is delivered to the system over a short period of time. Exceedingly sensitive impulse detection has been proposed to observe very weak signals like those due to long-range interactions with dark matter that require much higher sensitivities than current sensors can provide. Quantum resources to go beyond the traditional standard quantum limit of these sensors include squeezing of the light used to transduce the signal, backaction evasion by measuring the optimal quadrature, and quantum nondemolition (QND) measurements that reduce backaction directly. These methods have been developed in the context of gravitational wave detection for target frequencies in the audio band range. Here, we provide the theoretical limits to quantum noise reduction for higher and broader frequency targets, such as those from dark matter signals, while combining quantum-enhanced readout techniques based on squeezed light and QND measurements with optomechanical sensors. We demonstrate that backaction evasion through QND techniques dramatically reduces the technical challenges presented when using squeezed light for broadband force detection, paving the way for combining multiple quantum noise reduction techniques for enhanced sensitivity in the context of impulse metrology.
We determine the theoretical limits to squeezing-enhanced measurement sensitivity of mechanical motion in a cavity optomechanical system. The motion of a mechanical resonator is transduced onto quadrature fluctuations of a cavity optical field and a measurement is performed on the optical field exiting the cavity. We compare measurement sensitivities obtained with coherent probing and quantum-enhanced probing of the mechanical motion, i.e. the coherent probe field carries vacuum states and quadrature squeezed vacuum states at sideband frequencies, respectively. We find that quantum-enhanced probing provides little to no improvement in motion sensing for resonators in the unresolved sideband regime but may significantly increase measurement sensitivities for resonators in the resolved sideband regime.