We propose a feasible experimental scheme to direct measure heat and work in cold atomic setups. The method is based on a recent proposal which shows that work is a positive operator valued measure (POVM). In the present contribution, we demonstrate that the interaction between the atoms and the light polarization of a probe laser allows us to implement such POVM. In this way the work done on or extracted from the atoms after a given process is encoded in the light quadrature that can be measured with a standard homodyne detection. The protocol allows one to verify fluctuation theorems and study properties of the non-unitary dynamics of a given thermodynamic process.
We propose a feasible experimental scheme to direct measure heat and work in cold atomic setups. The method is based on a recent proposal which shows that work is a positive operator valued measure (POVM). In the present contribution, we demonstrate that the interaction between the atoms and the light polarization of a probe laser allows us to implement such POVM. In this way the work done on or extracted from the atoms after a given process is encoded in the light quadrature that can be measured with a standard homodyne detection. The protocol allows one to verify fluctuation theorems and study properties of the non-unitary dynamics of a given thermodynamic process.
We review the use of an external auxiliary detector for measuring the full distribution of the work performed on or extracted from a quantum system during a unitary thermodynamic process. We first illustrate two paradigmatic schemes that allow one to measure the work distribution: a Ramsey technique to measure the characteristic function and a positive operator valued measure (POVM) scheme to directly measure the work probability distribution. Then, we show that these two ideas can be understood in a unified framework for assessing work fluctuations through a generic quantum detector and describe two protocols that are able to yield complementary information. This allows us also to highlight how quantum work is affected by the presence of coherences in the system’s initial state. Finally, we describe physical implementations and experimental realisations of the first two schemes.
The standard experimental techniques usually adopted in the study of the behaviour of ultracold atoms in optical lattices involve extracting the atom density profile from absorption images of the atomic sample after trap release. Quantum mechanically this procedure is described by a generalized measure (POVM); interference patterns found in absorption images suggest a generalized measure based on fixed-phase, coherent-like states. We show that this leads to an average atomic density which differs from the usually adopted one, obtained as the expectation value of the atom density operator in the many-body state.
A scheme is proposed, that allows one for performing homodyne detection of the matter-wave field of ultracold bosonic atoms. It is based on a pump-probe lasers setup, that both illuminates a Bose-Einstein condensate, acting as reference system, and a second ultracold gas, composed by the same atoms but in a quantum phase to determine. Photon scattering outcouples atoms from both systems, which then propagate freely. Under appropriate conditions, when the same photon can either be scattered by the Bose-Einstein condensate or by the other quantum gas, both flux of outcoupled atoms and scattered photons exhibit oscillations, whose amplitude is proportional to the condensate fraction of the quantum gas. This setup allows one, for instance, to perform thermometry of a condensate or to monitor the Mott-insulator/superfluid phase transition in optical lattices, and can be extended in order to measure the first-order correlation function of a quantum gas. The dynamics here discussed make use of the entanglement between atoms and photons, which is established by the scattering process, in order to access detailed information on the quantum state of matter.
In the present thesis we study several schemes where the detection of the emitted light from an atomic ensemble gives information about the state of the atoms. In chapter 1 we review the basic theory for the light matter interaction in second quantized form. In chapter 2 we show how conservative potentials for the atoms, such as dispersive optical lattices, can be realized experimentally due to the dispersive interaction with a far detuned laser We then review some basic properties of the physics of a particle in a periodic potential. We show that the ground state and the lowest lying excitations of a Bose-Einstein condensate in a dispersive optical lattice can be described by the Bose-Hubbard Hamiltonian. In chapter 3 we study the photonic bandstructure of a chain of fixed pointlike atoms in a biperiodic configuration. We calculate the photonic spectra and the probe transmission if the atoms are in free space and inside a standing wave optical resonator. In chapter 4 we consider light scattering from ultracold atoms in an optical lattice where we calculate the photonic scattering cross section as a function of energy and direction of emission along the Mott-insulator-superfluid phase transition. We take into account the finite tunneling rate for the atoms, when evaluating the scattering cross section of the photons and the effect of photon recoil onto the atoms. In chapter 5 we consider a gas of ultracold atoms trapped at two spatially separated regions in space. Using a two Raman lasers to couple atoms out of the systems we show that it is possible to measure the mean value of the atomic field operator of the two systems by measuring the scattered light intensity of one of the Raman lasers. We show how this setup might be used to measure the temperature of a Bose-Einstein condensate and to monitor the superfluid to Mott-insulator phase transition for a gas of ultracold atoms in an optical lattice.
Measurement-based quantum heat engines have attracted significant interest as alternatives to conventional thermal engines, as they replace the hot thermal reservoir with quantum measurements, thereby offering greater controllability and simpler implementation. Motivated by these advantages, we investigate a measurement-driven quantum Otto engine with a qubit working substance and study the optimal work extractable from such engines, including whether their performance can surpass that of conventional quantum Otto cycles. We analyze the engine in both the infinite-time (adiabatic) and finite-time (non-adiabatic) regimes, considering two distinct implementations obtained through optimization over all projection-valued measurements (PVMs) and over all two-outcome positive operator-valued measurements (POVMs). We show that measurement-based engines can outperform conventional quantum Otto engines within specific parameter regimes and that POVM-based engines can yield higher optimal work extraction than PVM-based ones. Furthermore, by incorporating the thermodynamic cost associated with resetting the auxiliary system required for POVM implementation, we demonstrate that the resulting net work output can still exceed that of PVM-based engines under suitable conditions on the spectral gaps and cold bath temperature. We also identify regimes in which non-adiabatic implementations can yield higher work output and efficiency than their adiabatic counterparts. Our study provides operational guidelines for designing improved measurement-driven quantum Otto engines.
The implementation of optical quantum technologies requires precise and complete characterisation tools for multi-mode nonclassical states of light. In this thesis, we propose and we implement experimentally three applications of optical quantum measurements, which combine aspects of light that are described by both discrete and continuous variables. In the rst part of this thesis, we present a new scheme for interferometric phase estimation, which uses double homodyne measurements as an alternative to photon counting. We show that, without requiring a phase reference, this scheme can achieve the optimum phase estimation precision for all path-symmetric probe states with a de ned number of photons. Furthermore, the estimation procedure is robust against state preparation imperfections, and naturally yields the same precision for all values of the estimated phase. We implement the proposed scheme experimentally, using a polarisation interferometer probed by a single-photon signal, and temporally multiplexing a single homodyne detector. We repeat the experiment with classical probe states. For both cases, we demonstrate the accuracy and precision of the proposed method, our implementation deviating by 5% from the fundamental precision bound. We demonstrate that, in our scheme, single-photon probe states can provide better precision than weak coherent ones. These results indicate that hybrid quantum resources, which combine tools from the discrete and continuous-variable paradigms, can play a signi cant role in practical sensing scenarios. In the second part of this thesis, we present an application in the eld of information thermodynamics, reporting an experimental realisation, in a photonic setup, of Maxwell's demon. We show that a measurement at the few-photons level, followed by a feed-forward operation, allows the extraction of work from intense thermal light into an electric circuit. The interpretation of the experiment leads us to the derivation of an equality relating work extraction to information acquired by measurement. We prove a bound using this relation, and show that it is in agreement with the experimental results. Our work puts forward photonic systems as a platform for experiments in the eld of information thermodynamics. In the third part of this thesis, we present a new method for the characterisation of broadband parametric down-conversion, based on stimulated frequency generation. In particular, we analyse the information contained in the frequency generation produced in the same mode as a seeding beam, for a type-II down-conversion process. We derive a model for this signal and argue that its detection can provide a useful characterisation tool in the high-gain regime, allowing for a self-referenced estimation of squeezing gain. We propose a method for measuring this signal and present an experimental realisation, based on a wave-guided source, at telecommunication wavelengths. Our experimental results demonstrate that the proposed measurement is an e ective experimental handle for discerning the intricate structure of broadband parametric down-conversion.