Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1410.8035 · Scientific Reports

A Josephson radiation comb generator

Paolo Solinas, Simone Gasparinetti, Dmitry S. Golubev, Francesco Giazotto

Published Jul 20, 2015• 28 citations
arXivHTMLPDF

Abstract

We propose the implementation of a Josephson Radiation Comb Generator (JRCG) based on a dc superconducting quantum interference device (SQUID) driven by an external magnetic field. When the magnetic flux crosses a diffraction node of the critical current interference pattern, the superconducting phase undergoes a jump of π and a voltage pulse is generated at the extremes of the SQUID. Under periodic drive this allows one to generate a sequence of sharp, evenly spaced voltage pulses. In the frequency domain, this corresponds to a comb-like structure similar to the one exploited in optics and metrology. With this device it is possible to generate up to several hundreds of harmonics of the driving frequency. For example, a chain of 50 identical high-critical-temperature SQUIDs driven at 1 GHz can deliver up to a 0.5 nW at 200 GHz. The availability of a fully solid-state radiation comb generator such as the JRCG, easily integrable on chip, may pave the way to a number of technological applications, from metrology to sub-millimeter wave generation.

DOI
10.1038/srep12260

Related papers

Radiation comb generation with extended Josephson junctions

Paolo Solinas, Riccardo Bosisio, F. Giazotto

We propose the implementation of a Josephson radiation comb generator based on an extended Josephson junction subject to a time dependent magnetic field. The junction critical current shows known diffraction patterns and determines the position of the critical nodes when it vanishes. When the magnetic flux passes through one of such critical nodes, the superconducting phase must undergo a π-jump to minimize the Josephson energy. Correspondingly, a voltage pulse is generated at the extremes of the junction. Under periodic driving, this allows us to produce a comb-like voltage pulses sequence. In the frequency domain, it is possible to generate up to hundreds of harmonics of the fundamental driving frequency, thus mimicking the frequency comb used in optics and metrology. We discuss several implementations through a rectangular, cylindrical, and annular junction geometries, allowing us to generate different radiation spectra and to produce an output power up to 10 pW at 50 GHz for a driving frequency of 100 MHz.

arXiv:1502.07122•Journal of Applied Physics•Sep 15, 2015•9 citations

Parasitic effects in superconducting quantum interference device-based radiation comb generators

Riccardo Bosisio, F. Giazotto, Paolo Solinas

We study several parasitic effects on the implementation of a Josephson radiation comb generator based on a dc superconducting quantum interference device (SQUID) driven by an external magnetic field. This system can be used as a radiation generator similarly to what is done in optics and metrology, and allows one to generate up to several hundreds of harmonics of the driving frequency. First we take into account how the assumption of a finite loop geometrical inductance and junction capacitance in each SQUID may alter the operation of the devices. Then, we estimate the effect of imperfections in the fabrication of an array of SQUIDs, which is an unavoidable source of errors in practical situations. We show that the role of the junction capacitance is, in general, negligible, whereas the geometrical inductance has a beneficial effect on the performance of the device. The errors on the areas and junction resistance asymmetries may deteriorate the performance, but their effect can be limited to a large extent by a suitable choice of fabrication parameters.

arXiv:1505.06333•Journal of Applied Physics•Dec 4, 2015•5 citations

Coherent microwave comb generation via the Josephson effect

Angelo Greco, Xavier Ballu, Francesco Giazotto +1 more

Frequency combs represent exceptionally precise measurement tools due to the coherence of their spectral lines. While optical frequency comb sources constitute a well-established technology, superconducting circuits provide a relatively unexplored on-chip platform for low-dissipation comb emitters able to span from gigahertz to terahertz frequencies. We demonstrate coherent microwave frequency comb generation by leveraging the ac Josephson effect in a superconducting quantum interference device. A time-dependent magnetic drive periodically generates voltage pulses, which in the frequency domain correspond to a comb with dozens of spectral modes here reported up to mode 46. The emitted power at the device level ranges from -170 dBm to -130 dBm per harmonic, corresponding to 40 dB dynamic range in the 4-8 GHz bandwidth. The micrometer-scale footprint and minimal dissipation inherent to superconducting systems foster the integration of our comb generator with advanced cryogenic electronics. Transferring optical techniques to the solid-state domain may enable new applications in quantum technologies.

arXiv:2503.13259•Nature Communications•Feb 20, 2026•1 citation

Nonlocal superconducting quantum interference device

Taewan Noh, Andrew Kindseth, Venkat Chandrasekhar

Superconducting quantum interference devices (SQUIDs) that incorporate two superconductor/insulator/superconductor (SIS) Josephson junctions in a closed loop form the core of some of the most sensitive detectors of magnetic and electric fields currently available. SQUIDs in these applications are typically operated with a finite voltage which generates microwave radiation through the ac Josephson effect. This radiation may impact the system being measured. We describe here a SQUID in which the Josephson junctions are formed from strips of normal metal (N) in good electrical contact with the superconductor (S). Such SNS SQUIDs can be operated under a finite voltage bias with performance comparable or potentially better than conventional SIS SQUIDs. However, they also permit a mode of operation that is based on the unusual interplay of quasiparticle currents and supercurrents in the normal metal of the Josephson junction. The method allows measurements of the flux dependence of the critical current of the SNS SQUID without applying a finite voltage bias across the SNS junction, enabling sensitive flux detection without generating microwave radiation.

arXiv:2011.06667•Physical review. B./Physical review. B•Aug 4, 2021•12 citations

Variable superconducting quantum-interference device: Theory

H. J. Fink, V. Grünfeld, S. M. Roberts

A dc superconducting quantum interference device (SQUID) consisting of a symmetric ring circuit with four Josephson junctions and two independent external currents ${I}_{1}$ and ${I}_{2}$, which enter the circuit at different points, has a phase boundary between the fully superconducting and the normal states that is different from that of a conventional SQUID. The control current ${I}_{2}$ modifies the magnetic flux (\ensuremath{\varphi}) periodicity and the value of the maximum measuring current ${I}_{1m}$(\ensuremath{\varphi}). For values of ${I}_{2}$>${I}_{c}$ (critical current of Josephson junction) the fully resistive state exists over flux intervals centered around (n+(1/2)${\ensuremath{\varphi}}_{0}$, where n is an integer and ${\ensuremath{\varphi}}_{0}$ is the fluxoid quantum. A superconducting circuit without Josephson junctions is suggested which should have a phase boundary similar to that found here. Minimization procedures which are usually employed in analyzing SQUID's are discussed.

Physical review. B, Condensed matter•Jul 1, 1987•5 citations

Electrical drive of a Josephson junction array using a cryogenic BiCMOS pulse generator

Yerzhan Kudabay, Oliver Kieler, Michael Starkloff +5 more

We have combined a cryogenic BiCMOS integrated circuit with a superconducting Josephson junction array. The BiCMOS circuit serves as an on-chip pulse generator delivering return-to-zero pulses with pulse frequencies of up to 15 GHz. With this microwave drive, we observe wide and flat Shapiro steps in the voltage-versus-current characteristics of the Josephson junction array. To the best of our knowledge, this is the first integration of a Josephson junction array with a cryogenic BiCMOS chip. Our results pave the way to a hybrid and fully integrated Josephson arbitrary waveform synthesizer with possible applications in quantum electronics and quantum voltage metrology.

cond-mat.supr-conCross-listedarXiv:2512.20367•Dec 24, 2025•0 citations
We propose the implementation of a Josephson Radiation Comb Generator (JRCG) based on a dc superconducting quantum interference device (SQUID) driven by an external magnetic field. When the magnetic flux crosses a diffraction node of the critical current interference pattern, the superconducting phase undergoes a jump of π and a voltage pulse is generated at the extremes of the SQUID. Under periodic drive this allows one to generate a sequence of sharp, evenly spaced voltage pulses. In the frequency domain, this corresponds to a comb-like structure similar to the one exploited in optics and metrology. With this device it is possible to generate up to several hundreds of harmonics of the driving frequency. For example, a chain of 50 identical high-critical-temperature SQUIDs driven at 1 GHz can deliver up to a 0.5 nW at 200 GHz. The availability of a fully solid-state radiation comb generator such as the JRCG, easily integrable on chip, may pave the way to a number of technological applications, from metrology to sub-millimeter wave generation.
We propose the implementation of a Josephson radiation comb generator based on an extended Josephson junction subject to a time dependent magnetic field. The junction critical current shows known diffraction patterns and determines the position of the critical nodes when it vanishes. When the magnetic flux passes through one of such critical nodes, the superconducting phase must undergo a π-jump to minimize the Josephson energy. Correspondingly, a voltage pulse is generated at the extremes of the junction. Under periodic driving, this allows us to produce a comb-like voltage pulses sequence. In the frequency domain, it is possible to generate up to hundreds of harmonics of the fundamental driving frequency, thus mimicking the frequency comb used in optics and metrology. We discuss several implementations through a rectangular, cylindrical, and annular junction geometries, allowing us to generate different radiation spectra and to produce an output power up to 10 pW at 50 GHz for a driving frequency of 100 MHz.
We study several parasitic effects on the implementation of a Josephson radiation comb generator based on a dc superconducting quantum interference device (SQUID) driven by an external magnetic field. This system can be used as a radiation generator similarly to what is done in optics and metrology, and allows one to generate up to several hundreds of harmonics of the driving frequency. First we take into account how the assumption of a finite loop geometrical inductance and junction capacitance in each SQUID may alter the operation of the devices. Then, we estimate the effect of imperfections in the fabrication of an array of SQUIDs, which is an unavoidable source of errors in practical situations. We show that the role of the junction capacitance is, in general, negligible, whereas the geometrical inductance has a beneficial effect on the performance of the device. The errors on the areas and junction resistance asymmetries may deteriorate the performance, but their effect can be limited to a large extent by a suitable choice of fabrication parameters.
Frequency combs represent exceptionally precise measurement tools due to the coherence of their spectral lines. While optical frequency comb sources constitute a well-established technology, superconducting circuits provide a relatively unexplored on-chip platform for low-dissipation comb emitters able to span from gigahertz to terahertz frequencies. We demonstrate coherent microwave frequency comb generation by leveraging the ac Josephson effect in a superconducting quantum interference device. A time-dependent magnetic drive periodically generates voltage pulses, which in the frequency domain correspond to a comb with dozens of spectral modes here reported up to mode 46. The emitted power at the device level ranges from -170 dBm to -130 dBm per harmonic, corresponding to 40 dB dynamic range in the 4-8 GHz bandwidth. The micrometer-scale footprint and minimal dissipation inherent to superconducting systems foster the integration of our comb generator with advanced cryogenic electronics. Transferring optical techniques to the solid-state domain may enable new applications in quantum technologies.
Superconducting quantum interference devices (SQUIDs) that incorporate two superconductor/insulator/superconductor (SIS) Josephson junctions in a closed loop form the core of some of the most sensitive detectors of magnetic and electric fields currently available. SQUIDs in these applications are typically operated with a finite voltage which generates microwave radiation through the ac Josephson effect. This radiation may impact the system being measured. We describe here a SQUID in which the Josephson junctions are formed from strips of normal metal (N) in good electrical contact with the superconductor (S). Such SNS SQUIDs can be operated under a finite voltage bias with performance comparable or potentially better than conventional SIS SQUIDs. However, they also permit a mode of operation that is based on the unusual interplay of quasiparticle currents and supercurrents in the normal metal of the Josephson junction. The method allows measurements of the flux dependence of the critical current of the SNS SQUID without applying a finite voltage bias across the SNS junction, enabling sensitive flux detection without generating microwave radiation.
A dc superconducting quantum interference device (SQUID) consisting of a symmetric ring circuit with four Josephson junctions and two independent external currents I1{I}_{1}I1​ and I2{I}_{2}I2​, which enter the circuit at different points, has a phase boundary between the fully superconducting and the normal states that is different from that of a conventional SQUID. The control current I2{I}_{2}I2​ modifies the magnetic flux (\ensuremath{\varphi}) periodicity and the value of the maximum measuring current I1m{I}_{1m}I1m​(\ensuremath{\varphi}). For values of I2{I}_{2}I2​>Ic{I}_{c}Ic​ (critical current of Josephson junction) the fully resistive state exists over flux intervals centered around (n+(1/2)${\ensuremath{\varphi}}_{0}$, where n is an integer and ${\ensuremath{\varphi}}_{0}$ is the fluxoid quantum. A superconducting circuit without Josephson junctions is suggested which should have a phase boundary similar to that found here. Minimization procedures which are usually employed in analyzing SQUID's are discussed.
We have combined a cryogenic BiCMOS integrated circuit with a superconducting Josephson junction array. The BiCMOS circuit serves as an on-chip pulse generator delivering return-to-zero pulses with pulse frequencies of up to 15 GHz. With this microwave drive, we observe wide and flat Shapiro steps in the voltage-versus-current characteristics of the Josephson junction array. To the best of our knowledge, this is the first integration of a Josephson junction array with a cryogenic BiCMOS chip. Our results pave the way to a hybrid and fully integrated Josephson arbitrary waveform synthesizer with possible applications in quantum electronics and quantum voltage metrology.