Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1410.4008 · Physical Review Letters

Microwave Quantum Illumination

Shabir Barzanjeh, Saikat Guha, Christian Weedbrook, David Vitali, Jeffrey H. Shapiro, Stefano Pirandola

Published Feb 27, 2015• 487 citations
arXivHTMLPDF

Abstract

Quantum illumination is a quantum-optical sensing technique in which an entangled source is exploited to improve the detection of a low-reflectivity object that is immersed in a bright thermal background. Here, we describe and analyze a system for applying this technique at microwave frequencies, a more appropriate spectral region for target detection than the optical, due to the naturally occurring bright thermal background in the microwave regime. We use an electro-optomechanical converter to entangle microwave signal and optical idler fields, with the former being sent to probe the target region and the latter being retained at the source. The microwave radiation collected from the target region is then phase conjugated and upconverted into an optical field that is combined with the retained idler in a joint-detection quantum measurement. The error probability of this microwave quantum-illumination system, or quantum radar, is shown to be superior to that of any classical microwave radar of equal transmitted energy.

DOI
10.1103/physrevlett.114.080503

Related papers

Microwave quantum illumination with a digital phase-conjugated receiver

Shabir Barzanjeh, Stefano Pirandola, David Vitali +1 more

Quantum illumination is a sensing technique that employs entangled signal-idler beams to improve the detection efficiency of low-reflectivity objects in environments with large thermal noise. The advantage over classical strategies is evident at low signal brightness, a feature which could make the protocol an ideal prototype for non-invasive scanning or low-power short-range radar. Here we experimentally investigate the concept of quantum illumination at microwave frequencies, by generating entangled fields using a Josephson parametric converter which are then amplified to illuminate a room-temperature object at a distance of 1 meter. Starting from experimental data, we simulate the case of perfect idler photon number detection, which results in a quantum advantage compared to the relative classical benchmark. Our results highlight the opportunities and challenges on the way towards a first room-temperature application of microwave quantum circuits.

IEEE Radar Conference (RadarConf)•Sep 21, 2020•11 citations

Microwave quantum illumination via cavity magnonics

Qizhi Cai, Jinkun Liao, Bohai Shen +2 more

Quantum illumination (QI) is a quantum sensing protocol mainly for target detection which uses entangled signal-idler photon pairs to enhance the detection efficiency of low-reflectivity objects that are immersed in thermal noisy environments. Due to the naturally occurring background radiation, the photon emitted toward potential targets more appropriately lies in the microwave region. Here, we propose a hybrid quantum source based on cavity magnonics for microwave QI, where the medium that bridges the optical and the microwave modes is magnon, the quanta of spin wave. Within experimentally accessible parameters, significant microwave-optical quantum resources of interest can be generated, leading to orders of magnitude lower detecting error probability compared with the electro-optomechanical prototype quantum radar and any classical microwave radar with equal transmitted energy.

arXiv:2011.04301•Physical Review A•May 17, 2021•40 citations

Microwave quantum illumination using a digital receiver

Barzanjeh, Shabir, Stefano Pirandola, Vitali, David +1 more

Quantum illumination uses entangled signal-idler photon pairs to boost the detection efficiency of low-reflectivity objects in environments with bright thermal noise. Its advantage is particularly evident at low signal powers, a promising feature for applications such as noninvasive biomedical scanning or low-power short-range radar. Here, we experimentally investigate the concept of quantum illumination at microwave frequencies. We generate entangled fields to illuminate a room-temperature object at a distance of 1 m in a free-space detection setup. We implement a digital phase-conjugate receiver based on linear quadrature measurements that outperforms a symmetric classical noise radar in the same conditions, despite the entanglement-breaking signal path. Starting from experimental data, we also simulate the case of perfect idler photon number detection, which results in a quantum advantage compared with the relative classical benchmark. Our results highlight the opportunities and challenges in the way toward a first room-temperature application of microwave quantum circuits.

•Jan 1, 2020•84 citations

Microwave quantum illumination using a digital receiver

S. Barzanjeh, Stefano Pirandola, D. Vitali +1 more

Quantum illumination uses entangled signal-idler photon pairs to boost the detection efficiency of low-reflectivity objects in environments with bright thermal noise. Its advantage is particularly evident at low signal powers, a promising feature for applications such as noninvasive biomedical scanning or low-power short-range radar. Here, we experimentally investigate the concept of quantum illumination at microwave frequencies. We generate entangled fields to illuminate a room-temperature object at a distance of 1 m in a free-space detection setup. We implement a digital phase-conjugate receiver based on linear quadrature measurements that outperforms a symmetric classical noise radar in the same conditions, despite the entanglement-breaking signal path. Starting from experimental data, we also simulate the case of perfect idler photon number detection, which results in a quantum advantage compared with the relative classical benchmark. Our results highlight the opportunities and challenges in the way toward a first room-temperature application of microwave quantum circuits.

arXiv:1908.03058•Science Advances•May 8, 2020•227 citations

Quantum Illumination with Gaussian States

Si-Hui Tan, Baris I. Erkmen, Vittorio Giovannetti +5 more

An optical transmitter irradiates a target region containing a bright thermal-noise bath in which a low-reflectivity object might be embedded. The light received from this region is used to decide whether the object is present or absent. The performance achieved using a coherent-state transmitter is compared with that of a quantum-illumination transmitter, i.e., one that employs the signal beam obtained from spontaneous parametric down-conversion. By making the optimum joint measurement on the light received from the target region together with the retained spontaneous parametric down-conversion idler beam, the quantum-illumination system realizes a 6 dB advantage in the error-probability exponent over the optimum reception coherent-state system. This advantage accrues despite there being no entanglement between the light collected from the target region and the retained idler beam.

arXiv:0810.0534•Physical Review Letters•Dec 18, 2008•691 citations

Microwave Quantum Illumination with Optical Memory and Single-Mode Phase-Conjugate Receiver

Sangwoo Jeon, Kim, Jihwan, Duk Y. Kim +3 more

Microwave quantum illumination with entangled pairs of microwave signal and optical idler modes, can achieve the sub-optimal performance with joint measurement of the signal and idler modes. Here, we first propose a testbed of microwave quantum illumination with an optical memory which is simulated with a delay line in the idler mode. It provides how much an input two-mode squeezing is necessary to compensate the loss of the optical memory, while maintaining quantum advantage over coherent state. When the memory is lossy, the input two-mode squeezing has to be higher through high cooperativity in the optical mode. Under the testbed, we propose a single-mode phase conjugate receiver that consists of a low-reflectivity beam splitter, an electro-optomechanical phase conjugator, and a photon number resolving detector. The performance of the newly proposed receiver approaches the maximum quantum advantage for local measurement. Furthermore, the quantum advantage is obtained even with an on-off detection while being robust against the loss of the memory.

arXiv:2405.14118•May 23, 2024•0 citations
Quantum illumination is a quantum-optical sensing technique in which an entangled source is exploited to improve the detection of a low-reflectivity object that is immersed in a bright thermal background. Here, we describe and analyze a system for applying this technique at microwave frequencies, a more appropriate spectral region for target detection than the optical, due to the naturally occurring bright thermal background in the microwave regime. We use an electro-optomechanical converter to entangle microwave signal and optical idler fields, with the former being sent to probe the target region and the latter being retained at the source. The microwave radiation collected from the target region is then phase conjugated and upconverted into an optical field that is combined with the retained idler in a joint-detection quantum measurement. The error probability of this microwave quantum-illumination system, or quantum radar, is shown to be superior to that of any classical microwave radar of equal transmitted energy.
Quantum illumination is a sensing technique that employs entangled signal-idler beams to improve the detection efficiency of low-reflectivity objects in environments with large thermal noise. The advantage over classical strategies is evident at low signal brightness, a feature which could make the protocol an ideal prototype for non-invasive scanning or low-power short-range radar. Here we experimentally investigate the concept of quantum illumination at microwave frequencies, by generating entangled fields using a Josephson parametric converter which are then amplified to illuminate a room-temperature object at a distance of 1 meter. Starting from experimental data, we simulate the case of perfect idler photon number detection, which results in a quantum advantage compared to the relative classical benchmark. Our results highlight the opportunities and challenges on the way towards a first room-temperature application of microwave quantum circuits.
Quantum illumination (QI) is a quantum sensing protocol mainly for target detection which uses entangled signal-idler photon pairs to enhance the detection efficiency of low-reflectivity objects that are immersed in thermal noisy environments. Due to the naturally occurring background radiation, the photon emitted toward potential targets more appropriately lies in the microwave region. Here, we propose a hybrid quantum source based on cavity magnonics for microwave QI, where the medium that bridges the optical and the microwave modes is magnon, the quanta of spin wave. Within experimentally accessible parameters, significant microwave-optical quantum resources of interest can be generated, leading to orders of magnitude lower detecting error probability compared with the electro-optomechanical prototype quantum radar and any classical microwave radar with equal transmitted energy.
Quantum illumination uses entangled signal-idler photon pairs to boost the detection efficiency of low-reflectivity objects in environments with bright thermal noise. Its advantage is particularly evident at low signal powers, a promising feature for applications such as noninvasive biomedical scanning or low-power short-range radar. Here, we experimentally investigate the concept of quantum illumination at microwave frequencies. We generate entangled fields to illuminate a room-temperature object at a distance of 1 m in a free-space detection setup. We implement a digital phase-conjugate receiver based on linear quadrature measurements that outperforms a symmetric classical noise radar in the same conditions, despite the entanglement-breaking signal path. Starting from experimental data, we also simulate the case of perfect idler photon number detection, which results in a quantum advantage compared with the relative classical benchmark. Our results highlight the opportunities and challenges in the way toward a first room-temperature application of microwave quantum circuits.
Quantum illumination uses entangled signal-idler photon pairs to boost the detection efficiency of low-reflectivity objects in environments with bright thermal noise. Its advantage is particularly evident at low signal powers, a promising feature for applications such as noninvasive biomedical scanning or low-power short-range radar. Here, we experimentally investigate the concept of quantum illumination at microwave frequencies. We generate entangled fields to illuminate a room-temperature object at a distance of 1 m in a free-space detection setup. We implement a digital phase-conjugate receiver based on linear quadrature measurements that outperforms a symmetric classical noise radar in the same conditions, despite the entanglement-breaking signal path. Starting from experimental data, we also simulate the case of perfect idler photon number detection, which results in a quantum advantage compared with the relative classical benchmark. Our results highlight the opportunities and challenges in the way toward a first room-temperature application of microwave quantum circuits.
An optical transmitter irradiates a target region containing a bright thermal-noise bath in which a low-reflectivity object might be embedded. The light received from this region is used to decide whether the object is present or absent. The performance achieved using a coherent-state transmitter is compared with that of a quantum-illumination transmitter, i.e., one that employs the signal beam obtained from spontaneous parametric down-conversion. By making the optimum joint measurement on the light received from the target region together with the retained spontaneous parametric down-conversion idler beam, the quantum-illumination system realizes a 6 dB advantage in the error-probability exponent over the optimum reception coherent-state system. This advantage accrues despite there being no entanglement between the light collected from the target region and the retained idler beam.
Microwave quantum illumination with entangled pairs of microwave signal and optical idler modes, can achieve the sub-optimal performance with joint measurement of the signal and idler modes. Here, we first propose a testbed of microwave quantum illumination with an optical memory which is simulated with a delay line in the idler mode. It provides how much an input two-mode squeezing is necessary to compensate the loss of the optical memory, while maintaining quantum advantage over coherent state. When the memory is lossy, the input two-mode squeezing has to be higher through high cooperativity in the optical mode. Under the testbed, we propose a single-mode phase conjugate receiver that consists of a low-reflectivity beam splitter, an electro-optomechanical phase conjugator, and a photon number resolving detector. The performance of the newly proposed receiver approaches the maximum quantum advantage for local measurement. Furthermore, the quantum advantage is obtained even with an on-off detection while being robust against the loss of the memory.