Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1409.6109

High-dimensional integration on $\mathbb{R}^d$, weighted Hermite spaces, and orthogonal transforms

Christian Irrgeher, Gunther Leobacher

Published Sep 22, 2014• 2 citations
arXivHTMLPDF

Abstract

It has been found empirically that quasi-Monte Carlo methods are often efficient for very high-dimensional problems, that is, with dimension in the hundreds or even thousands. The common explanation for this surprising fact is that those functions for which this holds true behave rather like low-dimensional functions in that only few of the coordinates have a size- able influence on its value. However, this statement may be true only after applying a suitable orthogonal transform to the input data, like utilizing the Brownian bridge construction or principal component analysis construction. We study the effect of general orthogonal transforms on functions on $\mathbb{R}^d$ which are ele- ments of certain weighted reproducing kernel Hilbert spaces. The notion of Hermite spaces is defined and it is shown that there are examples which admit tractability of integration. We translate the action of the orthogonal transform of $\mathbb{R}^d$ into an action on the Hermite coefficients and we give examples where orthogonal transforms have a dramatic effect on the weighted norm, thus providing an explanation for the efficiency of using suitable orthogonal transforms.

DOI
10.48550/arxiv.1409.6109

Related papers

High-dimensional integration: The quasi-Monte Carlo way

Josef Dick, Frances Y. Kuo, Ian H. Sloan

This paper is a contemporary review of QMC (‘quasi-Monte Carlo’) methods, that is, equal-weight rules for the approximate evaluation of high-dimensional integrals over the unit cube [0,1] s , where s may be large, or even infinite. After a general introduction, the paper surveys recent developments in lattice methods, digital nets, and related themes. Among those recent developments are methods of construction of both lattices and digital nets, to yield QMC rules that have a prescribed rate of convergence for sufficiently smooth functions, and ideally also guaranteed slow growth (or no growth) of the worst-case error as s increases. A crucial role is played by parameters called ‘weights’, since a careful use of the weight parameters is needed to ensure that the worst-case errors in an appropriately weighted function space are bounded, or grow only slowly, as the dimension s increases. Important tools for the analysis are weighted function spaces, reproducing kernel Hilbert spaces, and discrepancy, all of which are discussed with an appropriate level of detail.

Acta Numerica•Apr 2, 2013•615 citations

Quasi-Monte Carlo methods for high-dimensional integration: the standard (weighted Hilbert space) setting and beyond

F. Y. Kuo, Christoph Schwab, I. H. Sloan

This paper is a contemporary review of quasi-Monte Carlo (QMC) methods, that is, equal-weight rules for the approximate evaluation of high-dimensional integrals over the unit cube \([0,1]^s\). It first introduces the by-now standard setting of weighted Hilbert spaces of functions with square-integrable mixed first derivatives, and then indicates alternative settings, such as non-Hilbert spaces, that can sometimes be more suitable. Original contributions include the extension of the fast component-by-component (CBC) construction of lattice rules that achieve the optimal convergence order (a rate of almost \(1/N\), where \(N\) is the number of points, independently of dimension) to so-called “product and order dependent” (POD) weights, as seen in some recent applications. Although the paper has a strong focus on lattice rules, the function space settings are applicable to all QMC methods. Furthermore, the error analysis and construction of lattice rules can be adapted to polynomial lattice rules from the family of digital nets. doi:10.1017/S1446181112000077

ANZIAM Journal•May 21, 2012•4 citations

Constructive approaches to quasi-Monte Carlo methods for multiple integration

Frances Y. Kuo

Recently, quasi-Monte Carlo methods have been successfully used for approximating multiple integrals in hundreds of dimensions in mathematical finance, and were significantly more efficient than Monte Carlo methods. To understand the apparent success of quasi-Monte Carlo methods for multiple integration, one popular approach is to study worst-case error bounds in weighted function spaces in which the importance of the variables is moderated by some sequences of weights. Ideally, a family of quasi-Monte Carlo methods in some weighted function space should be strongly tractable. Strong tractability means that the minimal number of quadrature points n needed to reduce the initial error by a factor of ε is bounded by a polynomial in ε⁻¹ independently of the dimension d. Several recent publications show the existence of lattice rules that satisfy the strong tractability error bounds in weighted Korobov spaces of periodic integrands and weighted Sobolev spaces of non-periodic integrands. However, those results were non-constructive and thus give no clues as to how to actually construct these lattice rules. In this thesis, we focus on the construction of quasi-Monte Carlo methods that are strongly tractable. We develop and justify algorithms for the construction of lattice rules that achieve strong tractability error bounds in weighted Korobov and Sobolev spaces. The parameters characterizing these lattice rules are found ‘component-by-component’: the (d + 1)-th components are obtained by successive 1-dimensional searches, with the previous d components kept unchanged. The cost of these algorithms vary from O(nd²) to O(n³d²) operations. With currently available technology, they allow construction of rules easily with values of n up to several million and dimensions d up to several hundred.

•Jan 1, 2002•2 citations

Quasi-Monte Carlo tractability of integration problem in function spaces defined over products of balls

Jie Zhang, Yongping Liu

Recently, quasi-Monte Carlo (QMC) rules for multivariate integration in some weighted Sobolev spaces of functions defined over unit cubes [Formula: see text], products of [Formula: see text] copies of the simplex [Formula: see text] and products of [Formula: see text] copies of the unit sphere [Formula: see text] have been well-studied in the literature. In this paper, we consider QMC tractability of integrals of functions defined over product of [Formula: see text] copies of the ball [Formula: see text]. The space is a tensor product of [Formula: see text] reproducing kernel Hilbert spaces defined by positive and uniformly bounded weights [Formula: see text] for [Formula: see text]. We obtain matching necessary and sufficient conditions in terms of this weights for various notions of QMC tractability, including strong polynomial tractability, polynomial tractability, quasi-polynomial tractability, uniformly weak tractability and [Formula: see text]-weak tractability.

International Journal of Wavelets Multiresolution and Information Processing•May 12, 2019•3 citations

The error bounds and tractability of quasi-Monte Carlo algorithms in infinite dimension

Fred J. Hickernell, Xiaoqun Wang

Dimensionally unbounded problems are frequently encountered in practice, such as in simulations of stochastic processes, in particle and light transport problems and in the problems of mathematical finance. This paper considers quasi-Monte Carlo integration algorithms for weighted classes of functions of infinitely many variables, in which the dependence of functions on successive variables is increasingly limited. The dependence is modeled by a sequence of weights. The integrands belong to rather general reproducing kernel Hilbert spaces that can be decomposed as the direct sum of a series of their subspaces, each subspace containing functions of only a finite number of variables. The theory of reproducing kernels is used to derive a quadrature error bound, which is the product of two terms: the generalized discrepancy and the generalized variation. Tractability means that the minimal number of function evaluations needed to reduce the initial integration error by a factor ε \varepsilon is bounded by C ε − p C \varepsilon ^{-p} for some exponent p p and some positive constant C C . The ε \varepsilon -exponent of tractability is defined as the smallest power of ε − 1 \varepsilon ^{-1} in these bounds. It is shown by using Monte Carlo quadrature that the ε \varepsilon -exponent is no greater than 2 for these weighted classes of integrands. Under a somewhat stronger assumption on the weights and for a popular choice of the reproducing kernel it is shown constructively using the Halton sequence that the ε \varepsilon -exponent of tractability is 1, which implies that infinite dimensional integration is no harder than one-dimensional integration.

Mathematics of Computation•Aug 2, 2001•61 citations

QUASI-MONTE CARLO METHODS FOR HIGH-DIMENSIONAL INTEGRATION: THE STANDARD (WEIGHTED HILBERT SPACE) SETTING AND BEYOND

Frances Y. Kuo, Christoph Schwab, Ian H. Sloan

Abstract This paper is a contemporary review of quasi-Monte Carlo (QMC) methods, that is, equal-weight rules for the approximate evaluation of high-dimensional integrals over the unit cube [0,1] s . It first introduces the by-now standard setting of weighted Hilbert spaces of functions with square-integrable mixed first derivatives, and then indicates alternative settings, such as non-Hilbert spaces, that can sometimes be more suitable. Original contributions include the extension of the fast component-by-component (CBC) construction of lattice rules that achieve the optimal convergence order (a rate of almost 1/ N , where N is the number of points, independently of dimension) to so-called “product and order dependent” (POD) weights, as seen in some recent applications. Although the paper has a strong focus on lattice rules, the function space settings are applicable to all QMC methods. Furthermore, the error analysis and construction of lattice rules can be adapted to polynomial lattice rules from the family of digital nets.

The ANZIAM Journal•Jul 1, 2011•80 citations
High-dimensional integration on Rd\mathbb{R}^dRd, weighted Hermite spaces, and orthogonal transforms
It has been found empirically that quasi-Monte Carlo methods are often efficient for very high-dimensional problems, that is, with dimension in the hundreds or even thousands. The common explanation for this surprising fact is that those functions for which this holds true behave rather like low-dimensional functions in that only few of the coordinates have a size- able influence on its value. However, this statement may be true only after applying a suitable orthogonal transform to the input data, like utilizing the Brownian bridge construction or principal component analysis construction. We study the effect of general orthogonal transforms on functions on Rd\mathbb{R}^dRd which are ele- ments of certain weighted reproducing kernel Hilbert spaces. The notion of Hermite spaces is defined and it is shown that there are examples which admit tractability of integration. We translate the action of the orthogonal transform of Rd\mathbb{R}^dRd into an action on the Hermite coefficients and we give examples where orthogonal transforms have a dramatic effect on the weighted norm, thus providing an explanation for the efficiency of using suitable orthogonal transforms.
This paper is a contemporary review of QMC (‘quasi-Monte Carlo’) methods, that is, equal-weight rules for the approximate evaluation of high-dimensional integrals over the unit cube [0,1] s , where s may be large, or even infinite. After a general introduction, the paper surveys recent developments in lattice methods, digital nets, and related themes. Among those recent developments are methods of construction of both lattices and digital nets, to yield QMC rules that have a prescribed rate of convergence for sufficiently smooth functions, and ideally also guaranteed slow growth (or no growth) of the worst-case error as s increases. A crucial role is played by parameters called ‘weights’, since a careful use of the weight parameters is needed to ensure that the worst-case errors in an appropriately weighted function space are bounded, or grow only slowly, as the dimension s increases. Important tools for the analysis are weighted function spaces, reproducing kernel Hilbert spaces, and discrepancy, all of which are discussed with an appropriate level of detail.
This paper is a contemporary review of quasi-Monte Carlo (QMC) methods, that is, equal-weight rules for the approximate evaluation of high-dimensional integrals over the unit cube [0,1]s[0,1]^s[0,1]s. It first introduces the by-now standard setting of weighted Hilbert spaces of functions with square-integrable mixed first derivatives, and then indicates alternative settings, such as non-Hilbert spaces, that can sometimes be more suitable. Original contributions include the extension of the fast component-by-component (CBC) construction of lattice rules that achieve the optimal convergence order (a rate of almost 1/N1/N1/N, where NNN is the number of points, independently of dimension) to so-called “product and order dependent” (POD) weights, as seen in some recent applications. Although the paper has a strong focus on lattice rules, the function space settings are applicable to all QMC methods. Furthermore, the error analysis and construction of lattice rules can be adapted to polynomial lattice rules from the family of digital nets. doi:10.1017/S1446181112000077
Recently, quasi-Monte Carlo methods have been successfully used for approximating multiple integrals in hundreds of dimensions in mathematical finance, and were significantly more efficient than Monte Carlo methods. To understand the apparent success of quasi-Monte Carlo methods for multiple integration, one popular approach is to study worst-case error bounds in weighted function spaces in which the importance of the variables is moderated by some sequences of weights. Ideally, a family of quasi-Monte Carlo methods in some weighted function space should be strongly tractable. Strong tractability means that the minimal number of quadrature points n needed to reduce the initial error by a factor of ε is bounded by a polynomial in ε⁻¹ independently of the dimension d. Several recent publications show the existence of lattice rules that satisfy the strong tractability error bounds in weighted Korobov spaces of periodic integrands and weighted Sobolev spaces of non-periodic integrands. However, those results were non-constructive and thus give no clues as to how to actually construct these lattice rules. In this thesis, we focus on the construction of quasi-Monte Carlo methods that are strongly tractable. We develop and justify algorithms for the construction of lattice rules that achieve strong tractability error bounds in weighted Korobov and Sobolev spaces. The parameters characterizing these lattice rules are found ‘component-by-component’: the (d + 1)-th components are obtained by successive 1-dimensional searches, with the previous d components kept unchanged. The cost of these algorithms vary from O(nd²) to O(n³d²) operations. With currently available technology, they allow construction of rules easily with values of n up to several million and dimensions d up to several hundred.
Recently, quasi-Monte Carlo (QMC) rules for multivariate integration in some weighted Sobolev spaces of functions defined over unit cubes [Formula: see text], products of [Formula: see text] copies of the simplex [Formula: see text] and products of [Formula: see text] copies of the unit sphere [Formula: see text] have been well-studied in the literature. In this paper, we consider QMC tractability of integrals of functions defined over product of [Formula: see text] copies of the ball [Formula: see text]. The space is a tensor product of [Formula: see text] reproducing kernel Hilbert spaces defined by positive and uniformly bounded weights [Formula: see text] for [Formula: see text]. We obtain matching necessary and sufficient conditions in terms of this weights for various notions of QMC tractability, including strong polynomial tractability, polynomial tractability, quasi-polynomial tractability, uniformly weak tractability and [Formula: see text]-weak tractability.
Dimensionally unbounded problems are frequently encountered in practice, such as in simulations of stochastic processes, in particle and light transport problems and in the problems of mathematical finance. This paper considers quasi-Monte Carlo integration algorithms for weighted classes of functions of infinitely many variables, in which the dependence of functions on successive variables is increasingly limited. The dependence is modeled by a sequence of weights. The integrands belong to rather general reproducing kernel Hilbert spaces that can be decomposed as the direct sum of a series of their subspaces, each subspace containing functions of only a finite number of variables. The theory of reproducing kernels is used to derive a quadrature error bound, which is the product of two terms: the generalized discrepancy and the generalized variation. Tractability means that the minimal number of function evaluations needed to reduce the initial integration error by a factor ε \varepsilon is bounded by C ε − p C \varepsilon ^{-p} for some exponent p p and some positive constant C C . The ε \varepsilon -exponent of tractability is defined as the smallest power of ε − 1 \varepsilon ^{-1} in these bounds. It is shown by using Monte Carlo quadrature that the ε \varepsilon -exponent is no greater than 2 for these weighted classes of integrands. Under a somewhat stronger assumption on the weights and for a popular choice of the reproducing kernel it is shown constructively using the Halton sequence that the ε \varepsilon -exponent of tractability is 1, which implies that infinite dimensional integration is no harder than one-dimensional integration.
Abstract This paper is a contemporary review of quasi-Monte Carlo (QMC) methods, that is, equal-weight rules for the approximate evaluation of high-dimensional integrals over the unit cube [0,1] s . It first introduces the by-now standard setting of weighted Hilbert spaces of functions with square-integrable mixed first derivatives, and then indicates alternative settings, such as non-Hilbert spaces, that can sometimes be more suitable. Original contributions include the extension of the fast component-by-component (CBC) construction of lattice rules that achieve the optimal convergence order (a rate of almost 1/ N , where N is the number of points, independently of dimension) to so-called “product and order dependent” (POD) weights, as seen in some recent applications. Although the paper has a strong focus on lattice rules, the function space settings are applicable to all QMC methods. Furthermore, the error analysis and construction of lattice rules can be adapted to polynomial lattice rules from the family of digital nets.