Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1409.5630 · Physical Review B

High-gain weakly nonlinear flux-modulated Josephson parametric amplifier using a SQUID array

Xin Zhou, Vivien Schmitt, Patrice Bertet, D. Vion, Waltraut Wustmann, Vitaly S. Shumeiko, D. Esteve

Published Jun 30, 2014• 92 citations
arXivHTMLPDF

Abstract

We have developed and measured a high-gain quantum-limited microwave parametric amplifier based on a superconducting lumped LC resonator with the inductor L including an array of eight superconducting quantum interference devices (SQUIDs). This amplifier is parametrically pumped by modulating the flux threading the SQUIDs at twice the resonator frequency. Around 5 GHz, a maximum gain of 31 dB, a product amplitude gain $\ifmmode\times\else\texttimes\fi{}$ bandwidth above 60 MHz, and a 1 dB compression point of $\ensuremath{-}123$ dBm at 20 dB gain are obtained in the nondegenerate mode of operation. Phase-sensitive amplification-deamplification is also measured in the degenerate mode and yields a maximum gain of 37 dB. The compression point obtained is 18 dB above what would be obtained with a single SQUID of the same inductance, due to the smaller nonlinearity of the SQUID array.

DOI
10.1103/physrevb.89.214517

Related papers

Development and characterization of a flux-pumped lumped element Josephson parametric amplifier

Martina Esposito, Joseph Rahamim, Andrew Patterson +11 more

Josephson parametric amplification is a tool of paramount importance in circuit-QED especially for the quantum-noise-limited single-shot read-out of superconducting qubits. We developed a Josephson parametric amplifier (JPA) based on a lumped-element LC resonator, in which the inductance L is composed by a geometric inductance and an array of 4 superconducting quantum interference devices (SQUIDs). We characterized the main figures of merit of the device, obtaining a −3 dB bandwidth BW = 15 MHz for a gain G = 21 dB and a 1 dB compression point P1dB = −115 dBm. The obtained results are promising for the future use of such JPA as the first stage of amplification for single-shot readout of superconducting qubits.

EPJ Web of Conferences•Jan 1, 2019•4 citations

Flux-driven Josephson parametric amplifier

Tsuyoshi Yamamoto, K. Inomata, Watanabe, M. +5 more

We have developed a Josephson parametric amplifier, comprising a superconducting coplanar waveguide resonator terminated by a dc SQUID (superconducting quantum interference device). An external field (the pump, $\sim 20$ GHz) modulates the flux threading the dc SQUID, and, thereby, the resonant frequency of the cavity field (the signal, $\sim 10$ GHz), which leads to parametric signal amplification. We operated the amplifier at different band centers, and observed amplification (17 dB at maximum) and deamplification depending on the relative phase between the pump and the signal. The noise temperature is estimated to be less than 0.87 K.

arXiv:0808.1386•Aug 10, 2008•25 citations

Flux Pumped Kerr-Free Parametric Amplifier

Kagan Yanik, Irwin Huang, Bibek Bhandari +7 more

We propose a flux-pumped superconducting parametric amplifier based on symmetrically threaded superconducting quantum interference devices (SQUIDs) that achieves a Kerr-free operating point under suitable drive conditions. Eliminating the Kerr nonlinearity is advantageous for quantum-limited amplification, as it mitigates unwanted distortions in squeezing and prevents degradation of both gain and quantum efficiency in the high-gain strong drive regime. By replacing the central junction in the symmetrically threaded SQUIDs (STS) configuration with a linear inductor, we find that the Kerr-nonlinearity can be eliminated and the effective Hamiltonian reduces to that of a degenerate parametric amplifier (DPA), up to higher-order corrections in the zero-point fluctuations of the superconducting phase operator. We show that the deviations from ideal DPA behavior introduced by these higher-order terms are significantly weaker than those associated with a Kerr nonlinearity. Consequently, the STS design can be driven strongly while maintaining near-quantum-limited performance at the Kerr-free point. Our analysis predicts phase-preserving gain and efficiency approaching the quantum limit, with robust operation demonstrated up to 25 dB of gain.

quant-pharXiv:2602.13563•Feb 17, 2026•0 citations

Flux-driven Josephson parametric amplifier

Tsuyoshi Yamamoto, K. Inomata, 道生 渡部 +5 more

We have developed a Josephson parametric amplifier comprising a superconducting coplanar-waveguide resonator terminated by a dc superconducting quantum interference device (SQUID). An external field (the pump, ∼20 GHz) modulates the flux threading of the dc SQUID and, therefore, the resonant frequency of the cavity field (the signal, ∼10 GHz), which leads to the parametric signal amplification. We operated the amplifier at different band centers and observed amplification (17 dB at maximum) and deamplification depending on the relative phase between the pump and the signal. The noise temperature is estimated to be less than 0.87 K.

Applied Physics Letters•Jul 28, 2008•469 citations

High-gain and large-bandwidth Josephson parametric amplifier influenced by Fabry-Pérot interference

Shingo Kono, Jesper Ilves, Arjan F. van Loo +8 more

Quantum-limited parametric amplifiers are essential components for many quantum technologies operating in the microwave domain. Achieving both high gain and broad bandwidth, however, remains challenging due to trade-offs between gain and bandwidth, pump efficiency, and dynamic range. Moreover, high-gain broadband amplifiers become increasingly sensitive to their external electromagnetic environment, which can distort their gain spectra and hinder reliable operation. Here, we present an accurate theoretical model and a systematic design methodology for a flux-driven, lumped-element Josephson parametric amplifier based on a SQUID array. Our device achieves near-quantum-limited, phase-preserving amplification with a net gain of 20 (maximally 44) dB and a 3-dB bandwidth of $\sim$50 ($\lesssim$0.2) MHz. We further show that the gain spectra exhibit pronounced sensitivity to weak reflections in the input-output waveguide caused by impedance mismatches in the microwave environment. By incorporating Fabry-Pérot-type interference into a quantum input-output model, we analytically reproduce these complex spectral features and identify how they depend on the physical parameters of the environment. More generally, our results provide a practical framework for separating the intrinsic dynamics of parametric amplifiers from environmental effects. This approach enables reliable characterization and optimization of amplifier performance while providing a systematic strategy for diagnosing microwave reflections and engineering environmental interference to shape amplifier gain spectra, thereby offering a pathway toward robust, reproducible, and truly quantum-limited microwave amplification.

quant-pharXiv:2604.13881•Apr 16, 2026•0 citations

Josephson Array-Mode Parametric Amplifier

Volodymyr Sivak, Shyam Shankar, Guangtong Liu +2 more

We introduce a near-quantum-limited amplifier with a large tunable bandwidth and high dynamic range---the Josephson array-mode parametric amplifier (JAMPA). The signal and idler modes involved in the amplification process are realized by the array modes of a chain of 1000 flux-tunable Josephson-junction-based nonlinear elements. The frequency spacing between the array modes is comparable to the flux tunability of the modes, ensuring that any desired frequency can be occupied by a resonant mode, which can further be pumped to produce high gain. We experimentally demonstrate that the device can be operated as a nearly quantum-limited parametric amplifier with 20 dB of gain at almost any frequency within a 4--12-GHz band. On average, it has a 3-dB bandwidth of 11 MHz and an input 1-dB compression power of $\ensuremath{-}108\phantom{\rule{0.2em}{0ex}}\mathrm{dBm}$, which can go as high as $\ensuremath{-}93\phantom{\rule{0.2em}{0ex}}\mathrm{dBm}$. We envision the application of such a device to the time- and frequency-multiplexed readout of multiple qubits, as well as to the generation of continuous-variable cluster states.

arXiv:1909.08005•Physical Review Applied•Feb 7, 2020•57 citations
We have developed and measured a high-gain quantum-limited microwave parametric amplifier based on a superconducting lumped LC resonator with the inductor L including an array of eight superconducting quantum interference devices (SQUIDs). This amplifier is parametrically pumped by modulating the flux threading the SQUIDs at twice the resonator frequency. Around 5 GHz, a maximum gain of 31 dB, a product amplitude gain \ifmmode×\else\texttimes\fi\ifmmode\times\else\texttimes\fi{}\ifmmode×\else\texttimes\fi bandwidth above 60 MHz, and a 1 dB compression point of \ensuremath−123\ensuremath{-}123\ensuremath−123 dBm at 20 dB gain are obtained in the nondegenerate mode of operation. Phase-sensitive amplification-deamplification is also measured in the degenerate mode and yields a maximum gain of 37 dB. The compression point obtained is 18 dB above what would be obtained with a single SQUID of the same inductance, due to the smaller nonlinearity of the SQUID array.
Josephson parametric amplification is a tool of paramount importance in circuit-QED especially for the quantum-noise-limited single-shot read-out of superconducting qubits. We developed a Josephson parametric amplifier (JPA) based on a lumped-element LC resonator, in which the inductance L is composed by a geometric inductance and an array of 4 superconducting quantum interference devices (SQUIDs). We characterized the main figures of merit of the device, obtaining a −3 dB bandwidth BW = 15 MHz for a gain G = 21 dB and a 1 dB compression point P1dB = −115 dBm. The obtained results are promising for the future use of such JPA as the first stage of amplification for single-shot readout of superconducting qubits.
We have developed a Josephson parametric amplifier, comprising a superconducting coplanar waveguide resonator terminated by a dc SQUID (superconducting quantum interference device). An external field (the pump, ∼20\sim 20∼20 GHz) modulates the flux threading the dc SQUID, and, thereby, the resonant frequency of the cavity field (the signal, ∼10\sim 10∼10 GHz), which leads to parametric signal amplification. We operated the amplifier at different band centers, and observed amplification (17 dB at maximum) and deamplification depending on the relative phase between the pump and the signal. The noise temperature is estimated to be less than 0.87 K.
We propose a flux-pumped superconducting parametric amplifier based on symmetrically threaded superconducting quantum interference devices (SQUIDs) that achieves a Kerr-free operating point under suitable drive conditions. Eliminating the Kerr nonlinearity is advantageous for quantum-limited amplification, as it mitigates unwanted distortions in squeezing and prevents degradation of both gain and quantum efficiency in the high-gain strong drive regime. By replacing the central junction in the symmetrically threaded SQUIDs (STS) configuration with a linear inductor, we find that the Kerr-nonlinearity can be eliminated and the effective Hamiltonian reduces to that of a degenerate parametric amplifier (DPA), up to higher-order corrections in the zero-point fluctuations of the superconducting phase operator. We show that the deviations from ideal DPA behavior introduced by these higher-order terms are significantly weaker than those associated with a Kerr nonlinearity. Consequently, the STS design can be driven strongly while maintaining near-quantum-limited performance at the Kerr-free point. Our analysis predicts phase-preserving gain and efficiency approaching the quantum limit, with robust operation demonstrated up to 25 dB of gain.
We have developed a Josephson parametric amplifier comprising a superconducting coplanar-waveguide resonator terminated by a dc superconducting quantum interference device (SQUID). An external field (the pump, ∼20 GHz) modulates the flux threading of the dc SQUID and, therefore, the resonant frequency of the cavity field (the signal, ∼10 GHz), which leads to the parametric signal amplification. We operated the amplifier at different band centers and observed amplification (17 dB at maximum) and deamplification depending on the relative phase between the pump and the signal. The noise temperature is estimated to be less than 0.87 K.
Quantum-limited parametric amplifiers are essential components for many quantum technologies operating in the microwave domain. Achieving both high gain and broad bandwidth, however, remains challenging due to trade-offs between gain and bandwidth, pump efficiency, and dynamic range. Moreover, high-gain broadband amplifiers become increasingly sensitive to their external electromagnetic environment, which can distort their gain spectra and hinder reliable operation. Here, we present an accurate theoretical model and a systematic design methodology for a flux-driven, lumped-element Josephson parametric amplifier based on a SQUID array. Our device achieves near-quantum-limited, phase-preserving amplification with a net gain of 20 (maximally 44) dB and a 3-dB bandwidth of $\sim50(50 (50(\lesssim$0.2) MHz. We further show that the gain spectra exhibit pronounced sensitivity to weak reflections in the input-output waveguide caused by impedance mismatches in the microwave environment. By incorporating Fabry-Pérot-type interference into a quantum input-output model, we analytically reproduce these complex spectral features and identify how they depend on the physical parameters of the environment. More generally, our results provide a practical framework for separating the intrinsic dynamics of parametric amplifiers from environmental effects. This approach enables reliable characterization and optimization of amplifier performance while providing a systematic strategy for diagnosing microwave reflections and engineering environmental interference to shape amplifier gain spectra, thereby offering a pathway toward robust, reproducible, and truly quantum-limited microwave amplification.
We introduce a near-quantum-limited amplifier with a large tunable bandwidth and high dynamic range---the Josephson array-mode parametric amplifier (JAMPA). The signal and idler modes involved in the amplification process are realized by the array modes of a chain of 1000 flux-tunable Josephson-junction-based nonlinear elements. The frequency spacing between the array modes is comparable to the flux tunability of the modes, ensuring that any desired frequency can be occupied by a resonant mode, which can further be pumped to produce high gain. We experimentally demonstrate that the device can be operated as a nearly quantum-limited parametric amplifier with 20 dB of gain at almost any frequency within a 4--12-GHz band. On average, it has a 3-dB bandwidth of 11 MHz and an input 1-dB compression power of $\ensuremath{-}108\phantom{\rule{0.2em}{0ex}}\mathrm{dBm}$, which can go as high as $\ensuremath{-}93\phantom{\rule{0.2em}{0ex}}\mathrm{dBm}$. We envision the application of such a device to the time- and frequency-multiplexed readout of multiple qubits, as well as to the generation of continuous-variable cluster states.