Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1408.6202

The exact synthesis of 1- and 2-qubit Clifford+T circuits

Travis B. Russell

Published Aug 22, 2014• 2 citations
arXivHTMLPDF

Abstract

We describe a new method for the decomposition of an arbitrary $n$ qubit operator with entries in $\mathbb{Z}[i,\frac{1}{\sqrt{2}}]$, i.e., of the form $(a+b\sqrt{2}+i(c+d\sqrt{2}))/{\sqrt{2}^{k}}$, into Clifford+$T$ operators where $n\le 2$. This method achieves a bound of $O(k)$ gates using at most one ancilla using decomposition into $1$- and $2$-level matrices which was first proposed by Giles and Selinger.

DOI
10.48550/arxiv.1408.6202

Related papers

Synthesis of unitaries with Clifford+T circuits

Vadym Kliuchnikov

We describe a new method for approximating an arbitrary $n$ qubit unitary with precision $\varepsilon$ using a Clifford and T circuit with $O(4^{n}n(\log(1/\varepsilon)+n))$ gates. The method is based on rounding off a unitary to a unitary over the ring $\mathbb{Z}[i,1/\sqrt{2}]$ and employing exact synthesis. We also show that any $n$ qubit unitary over the ring $\mathbb{Z}[i,1/\sqrt{2}]$ with entries of the form $(a+b\sqrt{2}+ic+id\sqrt{2})/2^{k}$ can be exactly synthesized using $O(4^{n}nk)$ Clifford and T gates using two ancillary qubits. This new exact synthesis algorithm is an improvement over the best known exact synthesis method by B. Giles and P. Selinger requiring $O(3^{2^{n}}nk)$ elementary gates.

arXiv:1306.3200•Jun 13, 2013•24 citations

Exact synthesis of multiqubit Clifford+ T circuits

Brett Gordon Giles, Peter Selinger

We prove that a unitary matrix has an exact representation over the Clifford+$T$ gate set with local ancillas if and only if its entries are in the ring $\mathbb{Z}[\frac{1}{\sqrt{2}},i]$. Moreover, we show that one ancilla always suffices. These facts were conjectured by Kliuchnikov, Maslov, and Mosca. We obtain an algorithm for synthesizing a exact Clifford+$T$ circuit from any such $n$-qubit operator. We also characterize the Clifford+$T$ operators that can be represented without ancillas.

arXiv:1212.0506•Physical Review A•Mar 26, 2013•162 citations

Measurement-Assisted Clifford Synthesis

Sowmitra Das

In this letter, we introduce a method to synthesize an $n$-qubit Clifford unitary $C$ from the stabilizer tableau of its inverse $C†$, using ancilla qubits and measurements. The procedure uses ancillary $|+\rangle$ states, controlled-Paulis, $X$-basis measurements and single-qubit Pauli corrections on the data qubits (based on the measurement results). This introduces a new normal form for Clifford synthesis, with the number of two-qubit gates required exactly equal to the weight of the stabilizer tableau, and a depth linear in $n$.

quant-pharXiv:2511.19732•Nov 26, 2025•0 citations

Multi-qubit circuit synthesis and Hermitian lattices

Vadym Kliuchnikov, Sebastian Schönnenbeck

We present new optimal and heuristic algorithms for exact synthesis of multi-qubit unitaries and isometries. For example, our algorithms find Clifford and T circuits for unitaries with entries in $\mathbb{Z}[i,1/\sqrt{2}]$. The optimal algorithms are the A* search instantiated with a new data structure for graph vertices and new consistent heuristic functions. We also prove that for some gate sets, best-first search synthesis relying on the same heuristic is efficient. For example, for two-qubit Clifford and T circuits, our best-first search runtime is proportional to the T-count of the unitary. Our algorithms rely on Hermite and Smith Normal Forms of matrices with entries in a ring of integers of a number field, and we leverage the theory of and algorithms for Hermitian lattices over number fields to prove efficiency. These new techniques are of independent interest for future work on multi-qubit exact circuit synthesis and related questions.

arXiv:2405.19302•May 29, 2024•0 citations

Approximate synthesis of general single-qubit unitaries over the Clifford+$\sqrt{T}$ gate set

Mathias Weiden, Jae Won Kim, Justin Kalloor +2 more

For the standard Clifford+$T$ gate set, deterministic, ancilla-free synthesis now attains the minimal $T$-count for general single-qubit unitaries (Morisaki et al., arXiv:2510.05816). The $\sqrt{T}$ gate rotates by half the angle of $T$, generating a finer lattice of implementable operations. Access to this magic state is expected to lower the cost of deterministic and ancilla-free synthesis of general single-qubit unitaries (Kliuchnikov et al., arXiv:2203.10064), but no direct Clifford+$\sqrt{T}$ algorithm existed for this case. We provide one by extending the integer lattice-point enumeration method of Morisaki et al. We adopt a resource state cost model based on the magic-state catalysis approach of Gidney and Fowler (arXiv:1812.01238). On Haar-random targets synthesized to precisions ranging from $\varepsilon=10^{-3}$ to $10^{-8}$, the cost of Clifford+$\sqrt{T}$ circuits scales as $2.4\log_2(1/\varepsilon)$ compared to $3.0\log_2(1/\varepsilon)$ for $T$-count-optimal Clifford+$T$ circuits. Once a one-time catalyst state is amortized, the Clifford+$\sqrt{T}$ circuits are never costlier than their Clifford+$T$ counterparts.

quant-pharXiv:2609.16659•Sep 16, 2026•0 citations

Unitary Synthesis with Fewer T Gates

Xinyu Tan

We present a simple algorithm that implements an arbitrary n -qubit unitary operator using a Clifford + T circuit with T-count O ( 2 4 n / 3 n 2 / 3 ) and ancilla-count O ( 2 2 n / 3 n 1 / 3 ) . The previous best T-count for unitary synthesis was O ( 2 3 n / 2 n ) with O ( 2 n / 2 ) ancillae by [Low , ]. There is a fundamental tradeoff between T gates and ancillae, and our algorithm extends the achievable regime of this tradeoff, reducing the exponent in T-count from 3 n / 2 to 4 n / 3 . The best known lower bound remains Ω ( 2 n ) , so the optimal T-count for general unitary synthesis is still open. Our construction is based on a recursive application of the cosine-sine decomposition, together with a generalization of the optimal diagonal unitary synthesis method by [D. Gosset , ] to multi-controlled k -qubit unitaries.

arXiv:2509.25702•PRX Quantum•Aug 10, 2026•0 citations
We describe a new method for the decomposition of an arbitrary nnn qubit operator with entries in Z[i,12]\mathbb{Z}[i,\frac{1}{\sqrt{2}}]Z[i,2​1​], i.e., of the form (a+b2+i(c+d2))/2k(a+b\sqrt{2}+i(c+d\sqrt{2}))/{\sqrt{2}^{k}}(a+b2​+i(c+d2​))/2​k, into Clifford+TTT operators where n≤2n\le 2n≤2. This method achieves a bound of O(k)O(k)O(k) gates using at most one ancilla using decomposition into 111- and 222-level matrices which was first proposed by Giles and Selinger.
We describe a new method for approximating an arbitrary nnn qubit unitary with precision ε\varepsilonε using a Clifford and T circuit with O(4nn(log⁡(1/ε)+n))O(4^{n}n(\log(1/\varepsilon)+n))O(4nn(log(1/ε)+n)) gates. The method is based on rounding off a unitary to a unitary over the ring Z[i,1/2]\mathbb{Z}[i,1/\sqrt{2}]Z[i,1/2​] and employing exact synthesis. We also show that any nnn qubit unitary over the ring Z[i,1/2]\mathbb{Z}[i,1/\sqrt{2}]Z[i,1/2​] with entries of the form (a+b2+ic+id2)/2k(a+b\sqrt{2}+ic+id\sqrt{2})/2^{k}(a+b2​+ic+id2​)/2k can be exactly synthesized using O(4nnk)O(4^{n}nk)O(4nnk) Clifford and T gates using two ancillary qubits. This new exact synthesis algorithm is an improvement over the best known exact synthesis method by B. Giles and P. Selinger requiring O(32nnk)O(3^{2^{n}}nk)O(32nnk) elementary gates.
We prove that a unitary matrix has an exact representation over the Clifford+TTT gate set with local ancillas if and only if its entries are in the ring Z[12,i]\mathbb{Z}[\frac{1}{\sqrt{2}},i]Z[2​1​,i]. Moreover, we show that one ancilla always suffices. These facts were conjectured by Kliuchnikov, Maslov, and Mosca. We obtain an algorithm for synthesizing a exact Clifford+TTT circuit from any such nnn-qubit operator. We also characterize the Clifford+TTT operators that can be represented without ancillas.
In this letter, we introduce a method to synthesize an nnn-qubit Clifford unitary CCC from the stabilizer tableau of its inverse C†C†C†, using ancilla qubits and measurements. The procedure uses ancillary ∣+⟩|+\rangle∣+⟩ states, controlled-Paulis, XXX-basis measurements and single-qubit Pauli corrections on the data qubits (based on the measurement results). This introduces a new normal form for Clifford synthesis, with the number of two-qubit gates required exactly equal to the weight of the stabilizer tableau, and a depth linear in nnn.
We present new optimal and heuristic algorithms for exact synthesis of multi-qubit unitaries and isometries. For example, our algorithms find Clifford and T circuits for unitaries with entries in Z[i,1/2]\mathbb{Z}[i,1/\sqrt{2}]Z[i,1/2​]. The optimal algorithms are the A* search instantiated with a new data structure for graph vertices and new consistent heuristic functions. We also prove that for some gate sets, best-first search synthesis relying on the same heuristic is efficient. For example, for two-qubit Clifford and T circuits, our best-first search runtime is proportional to the T-count of the unitary. Our algorithms rely on Hermite and Smith Normal Forms of matrices with entries in a ring of integers of a number field, and we leverage the theory of and algorithms for Hermitian lattices over number fields to prove efficiency. These new techniques are of independent interest for future work on multi-qubit exact circuit synthesis and related questions.
Approximate synthesis of general single-qubit unitaries over the Clifford+T\sqrt{T}T​ gate set
For the standard Clifford+TTT gate set, deterministic, ancilla-free synthesis now attains the minimal TTT-count for general single-qubit unitaries (Morisaki et al., arXiv:2510.05816). The T\sqrt{T}T​ gate rotates by half the angle of TTT, generating a finer lattice of implementable operations. Access to this magic state is expected to lower the cost of deterministic and ancilla-free synthesis of general single-qubit unitaries (Kliuchnikov et al., arXiv:2203.10064), but no direct Clifford+T\sqrt{T}T​ algorithm existed for this case. We provide one by extending the integer lattice-point enumeration method of Morisaki et al. We adopt a resource state cost model based on the magic-state catalysis approach of Gidney and Fowler (arXiv:1812.01238). On Haar-random targets synthesized to precisions ranging from ε=10−3\varepsilon=10^{-3}ε=10−3 to 10−810^{-8}10−8, the cost of Clifford+T\sqrt{T}T​ circuits scales as 2.4log⁡2(1/ε)2.4\log_2(1/\varepsilon)2.4log2​(1/ε) compared to 3.0log⁡2(1/ε)3.0\log_2(1/\varepsilon)3.0log2​(1/ε) for TTT-count-optimal Clifford+TTT circuits. Once a one-time catalyst state is amortized, the Clifford+T\sqrt{T}T​ circuits are never costlier than their Clifford+TTT counterparts.
We present a simple algorithm that implements an arbitrary n -qubit unitary operator using a Clifford + T circuit with T-count O ( 2 4 n / 3 n 2 / 3 ) and ancilla-count O ( 2 2 n / 3 n 1 / 3 ) . The previous best T-count for unitary synthesis was O ( 2 3 n / 2 n ) with O ( 2 n / 2 ) ancillae by [Low , ]. There is a fundamental tradeoff between T gates and ancillae, and our algorithm extends the achievable regime of this tradeoff, reducing the exponent in T-count from 3 n / 2 to 4 n / 3 . The best known lower bound remains Ω ( 2 n ) , so the optimal T-count for general unitary synthesis is still open. Our construction is based on a recursive application of the cosine-sine decomposition, together with a generalization of the optimal diagonal unitary synthesis method by [D. Gosset , ] to multi-controlled k -qubit unitaries.