The time evolution and the asymptotic outcome of a Landau–Zener–Stueckelberg–Majorana (LZ) process under continuous weak non-selective measurement is analyzed. We compare two measurement protocols in which the populations of either the adiabatic or the non-adiabatic levels are (continuously and weakly) monitored. The weak measurement formalism, described using a Gaussian Kraus operator, leads to a time evolution characterized by a Markovian dephasing process, which, in the non-adiabatic measurement protocol is similar to earlier studies of LZ dynamics in a dephasing environment. Casting the problem in the language of measurement theory makes it possible for us to compare diabatic and adiabatic measurement scenarios, to consider engineered dephasing as a control device and to examine the manifestation of the Zeno effect under the different measurement protocols. In particular, under measurement of the non-adiabatic populations, the Zeno effect is manifested not as a freezing of the measured system in its initial state, but rather as an approach to equal asymptotic populations of the two diabatic states. This behavior can be traced to the way by which the weak measurement formalism behaves in the strong measurement limit, with a built-in relationship between measurement time and strength.
The time evolution and the asymptotic outcome of a Landau–Zener–Stueckelberg–Majorana (LZ) process under continuous weak non-selective measurement is analyzed. We compare two measurement protocols in which the populations of either the adiabatic or the non-adiabatic levels are (continuously and weakly) monitored. The weak measurement formalism, described using a Gaussian Kraus operator, leads to a time evolution characterized by a Markovian dephasing process, which, in the non-adiabatic measurement protocol is similar to earlier studies of LZ dynamics in a dephasing environment. Casting the problem in the language of measurement theory makes it possible for us to compare diabatic and adiabatic measurement scenarios, to consider engineered dephasing as a control device and to examine the manifestation of the Zeno effect under the different measurement protocols. In particular, under measurement of the non-adiabatic populations, the Zeno effect is manifested not as a freezing of the measured system in its initial state, but rather as an approach to equal asymptotic populations of the two diabatic states. This behavior can be traced to the way by which the weak measurement formalism behaves in the strong measurement limit, with a built-in relationship between measurement time and strength.
In studies of the quantum Zeno and anti-Zeno effects, it is usual to consider rapid projective measurements with equal time intervals being performed on the system to check whether or not the system is in the initial state. These projective measurements are selective measurements in the sense that the measurement results are read out and only the case where all the measurement results correspond to the initial state is considered in the analysis of the effect of the measurements. In this paper, we extend such a treatment to consider the effect of repeated non-selective measurements - only the final measurement is required to correspond to the initial state, while we do not know the results of the intermediate measurements. We present a general formalism to derive the effective decay rate of the initial quantum state with such non-selective measurements. Importantly, we show that there is a difference between using non-selective measurements and the usual approach of considering only selective measurements only if we go beyond the weak system-environment coupling regime in models other than the usual population decay models. As such, we then apply our formalism to investigate the quantum Zeno and anti-Zeno effects for three exactly solvable system-environment models: a single two-level system undergoing dephasing, a single two-level system interacting with an environment of two-level systems, and a large spin undergoing dephasing. Our results show that the quantum Zeno and anti-Zeno effects in the presence of non-selective measurements can differ very significantly as compared to the repeated selective measurement scenario.
In studies of the quantum Zeno and anti-Zeno effects, it is usual to consider rapid projective measurements with equal time intervals being performed on the system to check whether or not the system is in the initial state. These projective measurements are selective measurements in the sense that the measurement results are read out and only the case where all the measurement results correspond to the initial state is considered in the analysis of the effect of the measurements. In this paper, we extend such a treatment to consider the effect of repeated non-selective projective measurements - only the final measurement is required to correspond to the initial state, while we do not know the results of the intermediate measurements. We present a general formalism to derive the effective decay rate of the initial quantum state with such nonselective measurements. Importantly, we show that there is a difference between using non-selective projective measurements and the usual approach of considering only selective measurements only if we go beyond the weak system-environment coupling regime in models other than the usual population decay models. As such, we then apply our formalism to investigate the quantum Zeno and anti-Zeno effects for three exactly solvable system-environment models: a single two-level system undergoing dephasing, a single two-level system interacting with an environment of two-level systems and a large spin undergoing dephasing. Our results show that the quantum Zeno and anti-Zeno effects in the presence of non-selective projective measurements can differ very significantly as compared to the repeated selective measurement scenario.
This is a theoretical thesis in the area of quantum measurement theory. Due to the extensive breadth of this field we choose to narrow our focus to examine a particular problem - the quantum Zeno effect (defined below). Quantum measurement theory is introduced in Chap. 1, using the terminology of effects and operations. This approach allows an operational definition of such terms as a state vector, an ensemble, and a measurement device (for instance), and a consideration of interactions between quantum systems and inaccurate measurement devices. We further introduce the quantum trajectories approach to consider the evolution of an individual quantum system subject to measurement. The quantum Zeno effect is introduced in Chap. 2. Any quantum treatment of a measurement interaction must consider the measurement backaction onto the measured system and this backaction will disrupt the free evolution of the system. The quantum Zeno effect occurs in the strong measurement limit where the measurement backaction totally freezes the evolution of the system, thus rendering the measurement useless. The effect is introduced via projective measurements of two level systems subject to measurement of level populations. At this stage we are able to discuss the main questions addressed by this thesis, and present its structure in Chap. 2. We then develop a new measurement model for the interaction between a system and a measurement device in Chap. 3. Our motivation in doing this is to better model the usual laboratory meter, and in our approach the meter dynamics are such that it relaxes towards an appropriate readout of the system parameter of interest. The irreducible quantum noise of the meter introduces fluctuations that drive the stochastic dynamical collapse of the system wavefunction. In our model, the measured system dynamics (if treated selectively) are described by a stochastic, nonlinear Schroedinger equation. A double well system subject to position measurement provides a natural first application for this model. This is done in Chap. 4 where we monitor the coherent tunnelling of a particle from one well to the other. The advantage afforded by considering this system is that it displays differing regimes where the measurement observable (position) is approximated as possessing either, respectively, a continuous or a discrete eigenvalue structure. Thus, we use this one model to explore the quantum Zeno effect in both measurement regimes. The above treatment is of a theoretical measurement model. In Chap. 5 we turn to consider a recent experimental test of the quantum Zeno effect which examined the dynamics of a two level atom subject to pulsed measurements of atomic level populations. We treat a slightly modified experiment in a fully continuous measurement regime. By first unravelling the optical Bloch equations, and second, using the quantum trajectories approach we demonstrate the existence of certain measurement regimes where there is a quantum Zeno effect, and other regimes where no measurement of the atomic populations is being effected at all. Through these results we demonstrate the importance of making a full analysis of the system-detector interaction before any conclusions can be made. In the remainder of the thesis we propose further possible tests of the quantum Zeno effect. In Chap. 6 the evolution of a Rydberg atom exchanging one photon with a single cavity mode subject to measurement is examined. The measurement is made by monitoring the photon number occupancy of the cavity mode using a beam of Rydberg atoms configured so as to perform phase sensitive detection. In the limit of frequent monitoring we show that the free oscillation of the atomic inversion is disrupted, and the atom is trapped close to its initial state. This is the quantum Zeno effect. In Chap. 7 we realize the Zeno effect on two possible systems. We consider first, a two level Jaynes-Cumming atom interacting with a cavity mode, and second, two electromagnetic modes configured as a multi-level parametric frequency converter. These systems interact with another cavity mode via a quadratic coupling system based on four wave mixing, and constructed to be a quantum nondemolition measurement of the photon number. This mode is damped to the environment thus effecting a measurement of the system populations. Again we show that this interaction, can manifest the quantum Zeno effect. Our explicit modelling of the system-detector interaction enables us to show how the effect depends on the resolution time of the detector. Finally, we consider a proposed measurement of the square of the quadrature phase of an electromagnetic mode in Chap. 8. Here, a three mode interaction mediated by a second order nonlinear susceptibility is considered. One mode, the pump, is prepared in a feedback generated photon number state to give insight into the role of pump noise. The other two modes are treated as an angular momentum system, and we show that photon counting on the two mode rotation system effects the above mentioned measurement. In addition, this measurement provides a direct measure of the second order squeezing of the signal. With that we finish our investigation of the quantum Zeno effect using the techniques of quantum measurement theory. However, in the epilogue [Chap. 9] we note that no thesis in quantum measurement theory would be complete without some consideration of the ``meaning attributed to the theory. In the epilogue we take a novel historical approach and examine the method by which metaphysical theories are formed to draw conclusions regarding quantum metaphysics.
Nonselective quantum measurements, i.e., measurements without reading the results, are often considered as a resource for manipulating quantum systems. In this work, we investigate optimal acceleration of the Landau-Zener (LZ) transitions by nonselective quantum measurements. We use the measurements of a population of a diabatic state of the LZ system at certain time instants as control and find the optimal time instants which maximize the LZ transition. We find surprising nonmonotonic behavior of the maximal transition probability with increase of the coupling parameter when the number of measurements is large. This transition probability gives an optimal approximation to the fundamental quantum Zeno effect (which corresponds to continuous measurements) by a fixed number of discrete measurements. The difficulty for the analysis is that the transition probability as a function of time instants has a huge number of local maxima. We resolve this problem both analytically by asymptotic analysis and numerically by the development of efficient algorithms mainly based on the dynamic programming. The proposed numerical methods can be applied, besides this problem, to a wide class of measurement-based optimal control problems.
Two aspects of the classic two-level Landau-Zener (LZ) problem are considered. First, we address the LZ problem when one or both levels decay, i.e., ${\ensuremath{\varepsilon}}_{j}(t)\ensuremath{\rightarrow}{\ensuremath{\varepsilon}}_{j}(t)\ensuremath{-}i{\ensuremath{\Gamma}}_{j}/2$. We find that if the system evolves from an initial time $\ensuremath{-}T$ to a final time +T such that $|{\ensuremath{\varepsilon}}_{1}(\ifmmode\pm\else\textpm\fi{}T)\ensuremath{-}{\ensuremath{\varepsilon}}_{2}(\ifmmode\pm\else\textpm\fi{}T)|$ is not too large, the LZ survival probability of a state $|j\ensuremath{\rangle}$ can increase with increasing decay rate of the other state $|i\ensuremath{\ne}j\ensuremath{\rangle}$. This surprising result occurs because the decay results in crossing of the two eigenvalues of the instantaneous non-Hermitian Hamiltonian. On the other hand, if $|{\ensuremath{\varepsilon}}_{1}(\ifmmode\pm\else\textpm\fi{}T)\ensuremath{-}{\ensuremath{\varepsilon}}_{2}(\ifmmode\pm\else\textpm\fi{}T)|\ensuremath{\rightarrow}\ensuremath{\infty}$ as $T\ensuremath{\rightarrow}\ensuremath{\infty}$, the probability is independent of the decay rate. These results are based on analytic solutions of the time-dependent Schr\"odinger equations for two cases: (a) the energy levels depend linearly on time, and (b) the energy levels are bounded and of the form ${\ensuremath{\varepsilon}}_{1,2}(t)=\ifmmode\pm\else\textpm\fi{}\ensuremath{\varepsilon}tanh(t/\mathcal{T})$. Second, we study LZ transitions affected by dephasing by formulating the Landau-Zener problem with noise in terms of a Schr\"odinger-Langevin stochastic coupled set of differential equations. The LZ survival probability then becomes a random variable whose probability distribution is shown to behave very differently for long and short dephasing times. We also discuss the combined effects of decay and dephasing on the LZ probability.
The realization of quantum adiabatic dynamics is at the core of implementations of adiabatic quantum computers. One major issue is to efficiently compromise between the long time scales required by the adiabatic protocol and the detrimental effects of the environment, which set an upper bound to the time scale of the operation. In this work we propose a protocol which achieves fast adiabatic dynamics by coupling the system to an external environment by the means of a quantum-non-demolition (QND) Hamiltonian. We analyse the infidelity of adiabatic transfer for a Landau-Zener problem in the presence of QND measurement, where the qubit couples to a meter which in turn quickly dissipates. We analyse the protocol's fidelity as a function of the strength of the QND coupling and of the relaxation time of the meter. In the limit where the decay rate of the ancilla is the largest frequency scale of the dynamics, the QND coupling induces an effective dephasing in the adiabatic basis. Optimal conditions for adiabaticity are found when the coupling with the meter induces dissipative dynamics which suppresses unwanted diabatic transitions.