Error-correcting codes protect quantum information and form the basis of fault-tolerant quantum computing. Leading proposals for fault-tolerant quantum computation require codes with an exceedingly rare property, a transversal non-Clifford gate. Codes with the desired property are presented for d-level qudit systems with prime d. The codes use n=d-1 qudits and can detect up to ∼d/3 errors. We quantify the performance of these codes for one approach to quantum computation known as magic-state distillation. Unlike prior work, we find performance is always enhanced by increasing d.
Error-correcting codes protect quantum information and form the basis of fault-tolerant quantum computing. Leading proposals for fault-tolerant quantum computation require codes with an exceedingly rare property, a transversal non-Clifford gate. Codes with the desired property are presented for d-level qudit systems with prime d. The codes use n=d-1 qudits and can detect up to ∼d/3 errors. We quantify the performance of these codes for one approach to quantum computation known as magic-state distillation. Unlike prior work, we find performance is always enhanced by increasing d.
Quantum error correction and fault-tolerance are at the heart of any scalable quantum computation architecture. Developing a set of tools that satisfy the requirements of fault- tolerant schemes is thus of prime importance for future quantum information processing implementations. The Clifford gate set has the desired fault-tolerant properties, preventing bad propagation of errors within encoded qubits, for many quantum error correcting codes, yet does not provide full universal quantum computation. Preparation of magic states can enable universal quantum computation in conjunction with Clifford operations, however preparing magic states experimentally will be imperfect due to implementation errors. Thankfully, there exists a scheme to distill pure magic states from prepared noisy magic states using only operations from the Clifford group and measurement in the Z-basis, such a scheme is called magic state distillation [1]. This work investigates the robustness of magic state distillation to faults in state preparation and the application of the Clifford gates in the protocol. We establish that the distillation scheme is robust to perturbations in the initial state preparation and characterize the set of states in the Bloch sphere that converge to the T-type magic state in different fidelity regimes. Additionally, we show that magic state distillation is robust to low levels of gate noise and that performing the distillation scheme using noisy Clifford gates is a more efficient than using encoded fault-tolerant gates due to the large overhead in fault-tolerant quantum computing architectures.
The main focus of this thesis is to explore the advantages of using higher-dimensional quantum systems (qudits) as building blocks for fault-tolerant quantum computation. In particular, we investigate the two main essential ingredients of many state-of-the-art fault-tolerant schemes [133], which are magic state distillation and topological error correction. The theory for both of these components is well established for the qubit case, but little has been known for the generalised qudit case. For magic state distillation, we first present a general numerical approach that can be used to investigate the distillation properties of any stabilizer code. We use this approach to study small threedimensional (qutrit) codes and classify, for the first time, new types of qutrit magic states. We then provide an analytic study of a family of distillation protocols based on the quantum Reed-Muller codes. We discover a particular five-dimensional code that, by many measures, outperforms all known qubit codes. For the topological error correction, we study the qudit toric code serving as a quantum memory. For this purpose we examine an efficient renormalization group decoder to estimate the error correction threshold. We find that when the qudit toric code is subject to a generalised bit-flip noise, and for a sufficiently high dimension, a threshold of 30% can be obtained under perfect decoding.
We propose a method for universal fault-tolerant quantum computation using concatenated quantum error correcting codes. The concatenation scheme exploits the transversal properties of two different codes, combining them to provide a means to protect against low-weight arbitrary errors. We give the required properties of the error correcting codes to ensure universal fault tolerance and discuss a particular example using the 7-qubit Steane and 15-qubit Reed-Muller codes. Namely, other than computational basis state preparation as required by the DiVincenzo criteria, our scheme requires no special ancillary state preparation to achieve universality, as opposed to schemes such as magic state distillation. We believe that optimizing the codes used in such a scheme could provide a useful alternative to state distillation schemes that exhibit high overhead costs.
Based on the quantum error-correction codes and concatenation, quantum logical gates can be implemented transversally, which is called the fault-tolerant quantum computation. Clifford gates can be directly and fault-tolerantly performed, but they cannot reach universal quantum computation. How to implement the non-Clifford gate fault-tolerantly is a vital technique in fault-tolerant universal quantum computation. Here the magic state is selected to help the implementing of the non-Clifford gate transversally. Based on the non-stabilizer state cos θi|0>+sinθi|1>, circuits which can execute 2θi rotation around X-axis and Z-axis fault-tolerantly are proposed. Then new non-stabilizer states in this form are developed and produced from the distilled magic state. By using these states, a number of non-Clifford gates can be performed transversally, which makes profound implication in fault-tolerant quantum computation. We calculate the number of the non-stabilizer states needed for simulating the desired rotation operations, which is less than that in previous protocols.
Abstract Magic states have been widely studied in recent years as resource states that help quantum computers achieve fault-tolerant universal quantum computing. The fault-tolerant quantum computing requires fault-tolerant implementation of a set of universal logical gates. Stabilizer code, as a commonly used error correcting code with good properties, can apply the Clifford gates transversally which is fault tolerant. But only Clifford gates cannot realize universal computation. Magic states are introduced to construct non-Clifford gates that combine with Clifford operations to achieve universal quantum computing. Since the preparation of quantum states is inevitably accompanied by noise, preparing the magic state with high fidelity and low overhead is the crucial problem to realizing universal quantum computation. In this paper, we survey the related literature in the past 20 years and introduce the common types of magic states, the protocols to obtain high-fidelity magic states, and overhead analysis for these protocols. Finally, we discuss the future directions of this field.
Quantum error correction is the backbone of fault-tolerant quantum computation, a necessary requirement for any large scale quantum computer. The fault-tolerance threshold theorem has long been a target for experimental precision, allowing for the possibility of reducing logical error rates to arbitrarily low levels without excessive overhead. While there are many promising fault-tolerant architectures, the path towards the most practical fault-tolerant scheme is far from decided and may vary for differing physical models. This thesis proposes new schemes for universal fault-tolerant quantum computation in both the concatenated and topological code settings. \n \nThrough the concatenation of two different error correcting codes, a set of universal fault-tolerant gates can be obtained without requiring the need for magic state distillation. A lower bound of 1.28times10−3 for the fault-tolerance threshold under circuit level depolarizing noise is obtained. Additionally, stacked codes are proposed as a means to simulate the action of a 3D topological code in 2D, allowing for the application of a universal set of transversal operations. While fault-tolerant, unfortunately the scheme does not exhibit a threshold due to the decreasing pseudo-threshold with growing code distance, yet points to potential interesting avenues for fault-tolerant computation in 2D without distillation. \n \nOne of the primary avenues to constructing fault-tolerant logical operations is through transversal operations. In this thesis, the set of single qubit logical gates that can be implemented transversally are characterized and determined to all belong to the Clifford hierarchy. Moreover, any diagonal two-qubit operation that can be applied transversally must belong to the same level of the Clifford hierarchy as the set of gates that can be implemented in the single-qubit case. \n \nThe opposite to quantum error correction is privacy, where the output of a channel is disguised from its input. The two are fundamentally related through the complementary channel construction. This thesis presents a new class of private quantum channels, expanding the existing class beyond a seemingly fundamental restriction. This yields interesting insights into the structure of quantum information and the leaking of information to external environments. Additionally, the duality is only recovered when extending the complementary channel to sufficiently high environmental dimension. \n \nFinally, the error properties of bucket brigade quantum Random Access Memory (qRAM) are assessed. It is determined that using the bucket brigade qRAM architecture for the running of Grover's algorithm necessitates reducing the error rate of the individual components to exponentially small levels for an exponential sized memory. As such, fault-tolerant architectures will likely play an essential role in the construction of such computing primitives.