We report an implementation of self-consistent Green's function many-body theory within a second-order approximation (GF2) for application with molecular systems. This is done by iterative solution of the Dyson equation expressed in matrix form in an atomic orbital basis, where the Green's function and self-energy are built on the imaginary frequency and imaginary time domain, respectively, and fast Fourier transform is used to efficiently transform these quantities as needed. We apply this method to several archetypical examples of strong correlation, such as a H32 finite lattice that displays a highly multireference electronic ground state even at equilibrium lattice spacing. In all cases, GF2 gives a physically meaningful description of the metal to insulator transition in these systems, without resorting to spin-symmetry breaking. Our results show that self-consistent Green's function many-body theory offers a viable route to describing strong correlations while remaining within a computationally tractable single-particle formalism.
We report an implementation of self-consistent Green's function many-body theory within a second-order approximation (GF2) for application with molecular systems. This is done by iterative solution of the Dyson equation expressed in matrix form in an atomic orbital basis, where the Green's function and self-energy are built on the imaginary frequency and imaginary time domain, respectively, and fast Fourier transform is used to efficiently transform these quantities as needed. We apply this method to several archetypical examples of strong correlation, such as a H32 finite lattice that displays a highly multireference electronic ground state even at equilibrium lattice spacing. In all cases, GF2 gives a physically meaningful description of the metal to insulator transition in these systems, without resorting to spin-symmetry breaking. Our results show that self-consistent Green's function many-body theory offers a viable route to describing strong correlations while remaining within a computationally tractable single-particle formalism.
Despite recent advances, systematic quantitative treatment of the electron correlation problem in extended systems remains a formidable task. Systematically improvable Green's function methods capable of quantitatively describing weak and at least qualitatively strong correlations appear as promising candidates for computational treatment of periodic systems. We present a periodic implementation of temperature-dependent self-consistent 2nd-order Green's function (GF2) method, where the self-energy is evaluated in the basis of atomic orbitals. Evaluating the real-space self-energy in atomic orbitals and solving the Dyson equation in k-space are the key components of a computationally feasible algorithm. We apply this technique to the one-dimensional hydrogen lattice--a prototypical crystalline system with a realistic Hamiltonian. By analyzing the behavior of the spectral functions, natural occupations, and self-energies, we claim that GF2 is able to recover metallic, band insulating, and at least qualitatively Mott regimes. We observe that the iterative nature of GF2 is essential to the emergence of the metallic and Mott phases.
The second-order Green's function method (GF2) was shown recently to be an accurate self-consistent approach for electronic structure of correlated systems since the self-energy accounts for both the weak and some of the strong correlation. The numerical scaling of GF2 is quite steep however, O(N5) (where the pre-factor is often hundreds), effectively preventing its application to large systems. Here, we develop a stochastic approach to GF2 (sGF2) where the self-energy is evaluated by a random-vector decomposition of Green's functions so that the dominant part of the calculation scales quasi linearly with system size. A study of hydrogen chains shows that the resulting approach is numerically efficient and accurate, as the stochastic errors are very small, 0.05% of the correlation energy for large systems with only a moderate computational effort. The method also yields automatically efficient MP2 energies and is automatically temperature dependent.
Electronic structure of materials from first principles is essential for one-to-one comparisons between theories and experiments. However, the many-body effects resulting from electron correlation and their interplay with other degrees of freedom pose a great challenge to design an ab initio approximate method with good accuracy and efficiency at the same time. In this thesis, we present our recent developments of ab initio many-body theory for solids based on the finite-temperature Green’s function formalism. We begin by reviewing the basic concepts and definitions of realistic electronic Hamiltonians (Ch. 2) as well as Green’s functions at finite temperature (Ch. 3). Overviews of self-consistent many-body perturbation theories and quantum embedding theories are then presented in Chs. 4 and 5 as complementary materials for the following chapters. In Ch. 6, we present algorithms and implementation details for the finite-temperature self-consistent GW (scGW) method in Gaussian-type orbitals for solids. Our implementation is based on the finite-temperature Green’s function formalism in which all equations are solved on the imaginary axis, without resorting to analytical continuation during the self-consistency. No quasiparticle approximation is employed and all matrix elements of self-energies are explicitly evaluated. We show agreement with other, differently formulated finite-temperature scGW implementations. By migrating computationally intensive calculations to GPUs, we obtain scalable results on large supercomputers with nearly optimal performance. Inclusion of relativistic effects in scGW is discussed in Ch. 7. Our formulation of relativistic scGW is based on the exact two-component formalism with one-electron approximation (X2C1e) and non-relativistic Coulomb interactions. Our theory allows us to study scalar relativistic effects, spin-orbit coupling, and their interplay with electron correlation without adjustable parameters. We examine the effect of the X2C1e by comparison to the established four-component formalism and reach excellent agreement. The simplicity of X2C1e enables construction of higher order theories, such as embedding theories, on top of perturbative calculations. In Ch. 8, we use self-energy embedding theory (SEET) to study the spectra of the prototypical undistorted cubic perovskites SrVO3 and SrMnO3. In the strongly correlated metallic SrVO3, we find that the usual attribution of the satellite peaks at -1.8 eV to Hund or Hubbard physics in the t2g orbitals is inconsistent with our calculations. In the strongly correlated insulator SrMnO3 we recover insulating behavior due to a feedback effect between the strongly correlated orbitals and the weakly correlated environment. Our calculation shows a systematic convergence of spectral features as the space of strongly correlated orbitals is enlarged, paving the way to a systematic parameter-free study of correlated perovskites. Lastly, in Ch. 9, we apply the Green’s function coupled cluster singles and doubles (GFCCSD) impurity solver to realistic impurity problems in strongly correlated solids within the framework of SEET. We describe the implementation details of our Green’s function coupled cluster (GFCC) solver, investigate its performance, and highlight potential advantages and problems on examples of impurities created for antiferromagnetic MnO and paramagnetic SrMnO3. GFCCSD provides satisfactory descriptions for weakly and moderately correlated impurities with sizes that are intractable by existing accurate impurity solvers such as exact diagonalization. However, when correlations become strong, the singles and doubles approximation used in GFCC could lead to instabilities in searching for the particle number present in impurity problems.
We fully develop the Monte Carlo many-body Green’s function (MC-GF) method with the following enhancements: (1) The truncation order of the perturbation expansion of the Dyson self-energy is raised from the second order (MC-GF2) to the third order (MC-GF3) with the aid of a computerized procedure to enumerate and transform all 84 third-order Goldstone diagrams into Monte Carlo integrable expressions and then into central processing unit (CPU)/graphical processing unit (GPU)-parallel computer codes. (2) An efficient algorithm is proposed that computes all off-diagonal and diagonal elements of the MC-GF2 and MC-GF3 self-energy matrices by common subexpression elimination. (3) The frequency-independent approximation is lifted by introducing a method that computes frequency derivatives of the MC-GF2 and MC-GF3 self-energies up to any arbitrarily high order at nearly no additional computational cost. (4) The imaginary-time integration in the Laplace-transformed expressions of the self-energy is carried out stochastically (instead of using a quadrature in the previous implementations), resulting in a 50- to 200-fold speedup. (5) The efficiency of the redundant-walker convergence acceleration scheme is analyzed numerically, and the guidelines are established to select an optimal number of walkers for maximal efficiency. When such an optimal number is used, the cost per sample is constant of molecular size on either many CPUs or many GPUs. (6) The computational cost to obtain a binding energy within a given statistical uncertainty is observed to increase as (tentatively) O( n 4 ) and O( n 5 ) of molecular size ( n is the number of electrons) with and without the diagonal approximation, respectively, as opposed to O( n 5 ) and O( n 6 ) of the corresponding deterministic algorithms. With this method applied to the electron binding energies of C 60, we show that the third-order corrections to the self-energies are much greater in electron binding energies than in ground-state energies. They display a sign of oscillatory convergence toward experimental results, not necessarily improving the agreement with increasing perturbation order, justifying MC-GF3 and motivating even higher-order methods.
A review of electronic dynamics of single-impurity and many-impurity Anderson models is contained in this report. Those models are used widely for many of the applications in diverse fields of interest, such as surface physics, theory of chemisorption and adsorbate reactions on metal surfaces, physics of intermediate valence systems, theory of heavy fermions, physics of quantum dots and other nanostructures. While standard treatments are generally based on perturbation methods, our approach is based on the non-perturbative technique for the thermodynamic Green functions. The method of the irreducible Green functions is used as the basic tool. This irreducible Green functions method allows one to describe the quasiparticle spectra with damping of the strongly correlated electron systems in a very general and natural way and to construct the relevant dynamical solution in a self-consistent way on the level of Dyson equation without decoupling the chain of the equations of motion for the Green functions. The subject matter includes the improved interpolating solution of the Anderson model. It was shown that an interpolating approximation, which simultaneously reproduces the weak-coupling limit up to second order in the interaction strength U and the strong-coupling limit up to second order in the hybridization V (and thus also fulfils the atomic limit) can be formulated self-consistently. This approach offers a new way for the systematic construction of approximate interpolation dynamical solutions of strongly correlated electron systems.
In this work, we develop two many-body quantum electrodynamic methods to calculate the ground-state energies of strongly coupled light-matter molecular systems. Specifically, we extend the second-order many-body Green's function theory (GF2) for electronic systems to incorporate electron-boson couplings. We employ two ansätze to treat the bosonic part of the system, namely the coherent-state (CS) and Lang-Firsov (LF) transformed vacuum state. These are combined with the GF2 method to construct two new approaches, which we refer to as CS-GF2 and LF-GF2. We benchmark CS- and LF-GF2 by studying various molecular systems inside an optical cavity. We investigate H2 and LiH potential energy surfaces, keto-enol tautomerization energy barrier, van der Waals interactions between two H2 molecules and the torsional potential energy surface of the ethylene molecule, C2H4. Both methods provide similar energy profiles, with relatively small differences between CS-GF2 and LF-GF2. Comparisons with the reference calculations also reveal remaining limitations at stretched bond lengths and near the twisted ethylene configuration. We additionally benchmark CS-GF2 against exact diagonalization for a two-site Hubbard-Holstein model and observe that it closely reproduces the coupling-induced energy change in the weakly interacting regime while improving upon CS-MP2 in the strongly interacting regime. Overall, the results demonstrate that CS-GF2 and LF-GF2 provide self-consistent descriptions of correlated molecular electron-boson systems, offering a many-body Green's function alternative for studying ground-state cavity-modified systems.