Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1403.3871 · Physical Review Letters

Flux Qubits with Long Coherence Times for Hybrid Quantum Circuits

Michael Stern, Gianluigi Catelani, Yuimaru Kubo, Cécile Grèzes, Audrey Bienfait, D. Vion, D. Esteve, Patrice Bertet

Published Sep 19, 2014• 152 citations
arXivHTMLPDF

Abstract

We present measurements of superconducting flux qubits embedded in a three dimensional copper cavity. The qubits are fabricated on a sapphire substrate and are measured by coupling them inductively to an on-chip superconducting resonator located in the middle of the cavity. At their flux-insensitive point, all measured qubits reach an intrinsic energy relaxation time in the 6-20 μs range and a pure dephasing time comprised between 3 and 10 μs. This significant improvement over previous works opens the way to the coherent coupling of a flux qubit to individual spins.

DOI
10.1103/physrevlett.113.123601

Related papers

Flux Qubits in Three-Dimensional Circuit-QED Architecture

Michael Stern, Yuimaru Kubo, Cécile Grèzes +4 more

We present measurements of superconducting flux qubits embedded in a three dimensional copper cavity. The qubits are fabricated on a sapphire substrate and are measured by coupling them inductively to an on-chip superconducting resonator located in the middle of the cavity. At their flux-insensitive point, all measured qubits reach an intrinsic energy relaxation time in the 6-20 microseconds range and a pure dephasing time comprised between 3 and 10 microseconds. This significant improvement over previous works opens the way to the coherent coupling of a flux-qubit to individual spins.

•Mar 16, 2014•1 citation

Tunable Superconducting Flux Qubits with Long Coherence Times

Tikai Chang, Tamar Jehuda Cohen, Itamar Holzman +2 more

In this work, we study a series of tunable flux qubits inductively coupled to a coplanar waveguide resonator fabricated on a sapphire substrate. Each qubit includes an asymmetric superconducting quantum interference device, which is controlled by the application of an external magnetic field and acts as a tunable Josephson junction. The tunability of the qubits is typically $\ifmmode\pm\else\textpm\fi{}3.5\phantom{\rule{0.2em}{0ex}}\mathrm{GHz}$ around their central gap frequency. The measured relaxation times are limited by dielectric losses in the substrate and can attain ${T}_{1}\ensuremath{\sim}8\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$. The echo dephasing times are limited by flux noise even at optimal points and reach ${T}_{2E}\ensuremath{\sim}4\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$, almost an order of magnitude longer than state of the art.

arXiv:2207.01460•Physical Review Applied•Feb 24, 2023•17 citations

A long-lived capacitively shunted flux qubit embedded in a 3D cavity

Leonid V. Abdurakhimov, Imran Mahboob, Hiraku Toida +2 more

We report the experimental realization of a 3D capacitively shunt superconducting flux qubit with long coherence times. At the optimal flux bias point, the qubit demonstrates energy relaxation times in the range of 60–90 μs and a Hahn-echo coherence time of about 80 μs, which can be further improved by dynamical decoupling. Qubit energy relaxation can be attributed to quasiparticle tunneling and unwanted two-level-system defects, while qubit dephasing is caused by flux noise away from the optimal point. Our results show that 3D c-shunt flux qubits demonstrate improved performance over other types of flux qubits, which is advantageous for applications such as quantum magnetometry and spin sensing.

arXiv:1911.04635•Applied Physics Letters•Dec 23, 2019•43 citations

Reproducibility and Gap Control of Superconducting Flux Qubits

Tikai Chang, Itamar Holzman, Tamar Jehuda Cohen +3 more

Superconducting flux qubits are promising candidates for the physical realization of a scalable quantum processor. Indeed, these circuits may have both a small decoherence rate and a large anharmonicity. These properties enable the application of fast quantum gates with high fidelity and reduce scaling limitations due to frequency crowding. The major difficulty of flux qubits' design consists of controlling precisely their transition energy---the so-called qubit gap---while keeping long and reproducible relaxation times. Solving this problem is challenging and requires extremely good control of e-beam lithography, oxidation parameters of the junctions, and sample surface. Here we present measurements of a large batch of flux qubits and demonstrate a high level of reproducibility and control of qubit gaps ($\ifmmode\pm\else\textpm\fi{}0.6\phantom{\rule{0.2em}{0ex}}\mathrm{GHz}$), relaxation times ($15$--$20\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$), and pure echo dephasing times ($15$--$30\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$). These results open the way for potential applications in the fields of quantum hybrid circuits and quantum computation.

Physical Review Applied•Dec 20, 2022•15 citations

The flux qubit revisited to enhance coherence and reproducibility

Fei Yan, Simon Gustavsson, Archana Kamal +12 more

Abstract The scalable application of quantum information science will stand on reproducible and controllable high-coherence quantum bits (qubits). Here, we revisit the design and fabrication of the superconducting flux qubit, achieving a planar device with broad-frequency tunability, strong anharmonicity, high reproducibility and relaxation times in excess of 40 μs at its flux-insensitive point. Qubit relaxation times T 1 across 22 qubits are consistently matched with a single model involving resonator loss, ohmic charge noise and 1/f -flux noise, a noise source previously considered primarily in the context of dephasing. We furthermore demonstrate that qubit dephasing at the flux-insensitive point is dominated by residual thermal-photons in the readout resonator. The resulting photon shot noise is mitigated using a dynamical decoupling protocol, resulting in T 2 ≈85 μs, approximately the 2 T 1 limit. In addition to realizing an improved flux qubit, our results uniquely identify photon shot noise as limiting T 2 in contemporary qubits based on transverse qubit–resonator interaction.

arXiv:1508.06299•Nature Communications•Nov 3, 2016•582 citations

Flux qubits in a planar circuit quantum electrodynamics architecture: Quantum control and decoherence

Jean-Luc Orgiazzi, C. Deng, David Layden +6 more

We report experiments on superconducting flux qubits in a circuit quantum electrodynamics (cQED) setup. Two qubits, independently biased and controlled, are coupled to a coplanar waveguide resonator. Dispersive qubit state readout reaches a maximum contrast of 72%. We measure energy relaxation times at the symmetry point of 5 and $10\ensuremath{\mu}\mathrm{s}$, corresponding to 7 and $20\ensuremath{\mu}\mathrm{s}$ when relaxation through the resonator due to Purcell effect is subtracted out, and levels of flux noise of 2.6 and $2.7\phantom{\rule{0.222222em}{0ex}}\ensuremath{\mu}{\mathrm{\ensuremath{\Phi}}}_{0}/\sqrt{\text{Hz}}$ at 1 Hz for the two qubits. We discuss the origin of decoherence in the measured devices. The strong coupling between the qubits and the cavity leads to a large, cavity-mediated, qubit-qubit coupling. This coupling, which is characterized spectroscopically, reaches 38 MHz. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.

arXiv:1407.1346•Physical review. B./Physical review. B•Mar 15, 2016•57 citations
We present measurements of superconducting flux qubits embedded in a three dimensional copper cavity. The qubits are fabricated on a sapphire substrate and are measured by coupling them inductively to an on-chip superconducting resonator located in the middle of the cavity. At their flux-insensitive point, all measured qubits reach an intrinsic energy relaxation time in the 6-20 μs range and a pure dephasing time comprised between 3 and 10 μs. This significant improvement over previous works opens the way to the coherent coupling of a flux qubit to individual spins.
We present measurements of superconducting flux qubits embedded in a three dimensional copper cavity. The qubits are fabricated on a sapphire substrate and are measured by coupling them inductively to an on-chip superconducting resonator located in the middle of the cavity. At their flux-insensitive point, all measured qubits reach an intrinsic energy relaxation time in the 6-20 microseconds range and a pure dephasing time comprised between 3 and 10 microseconds. This significant improvement over previous works opens the way to the coherent coupling of a flux-qubit to individual spins.
In this work, we study a series of tunable flux qubits inductively coupled to a coplanar waveguide resonator fabricated on a sapphire substrate. Each qubit includes an asymmetric superconducting quantum interference device, which is controlled by the application of an external magnetic field and acts as a tunable Josephson junction. The tunability of the qubits is typically $\ifmmode\pm\else\textpm\fi{}3.5\phantom{\rule{0.2em}{0ex}}\mathrm{GHz}$ around their central gap frequency. The measured relaxation times are limited by dielectric losses in the substrate and can attain ${T}_{1}\ensuremath{\sim}8\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$. The echo dephasing times are limited by flux noise even at optimal points and reach ${T}_{2E}\ensuremath{\sim}4\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$, almost an order of magnitude longer than state of the art.
We report the experimental realization of a 3D capacitively shunt superconducting flux qubit with long coherence times. At the optimal flux bias point, the qubit demonstrates energy relaxation times in the range of 60–90 μs and a Hahn-echo coherence time of about 80 μs, which can be further improved by dynamical decoupling. Qubit energy relaxation can be attributed to quasiparticle tunneling and unwanted two-level-system defects, while qubit dephasing is caused by flux noise away from the optimal point. Our results show that 3D c-shunt flux qubits demonstrate improved performance over other types of flux qubits, which is advantageous for applications such as quantum magnetometry and spin sensing.
Superconducting flux qubits are promising candidates for the physical realization of a scalable quantum processor. Indeed, these circuits may have both a small decoherence rate and a large anharmonicity. These properties enable the application of fast quantum gates with high fidelity and reduce scaling limitations due to frequency crowding. The major difficulty of flux qubits' design consists of controlling precisely their transition energy---the so-called qubit gap---while keeping long and reproducible relaxation times. Solving this problem is challenging and requires extremely good control of e-beam lithography, oxidation parameters of the junctions, and sample surface. Here we present measurements of a large batch of flux qubits and demonstrate a high level of reproducibility and control of qubit gaps ($\ifmmode\pm\else\textpm\fi{}0.6\phantom{\rule{0.2em}{0ex}}\mathrm{GHz}$), relaxation times (151515--$20\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$), and pure echo dephasing times (151515--$30\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$). These results open the way for potential applications in the fields of quantum hybrid circuits and quantum computation.
Abstract The scalable application of quantum information science will stand on reproducible and controllable high-coherence quantum bits (qubits). Here, we revisit the design and fabrication of the superconducting flux qubit, achieving a planar device with broad-frequency tunability, strong anharmonicity, high reproducibility and relaxation times in excess of 40 μs at its flux-insensitive point. Qubit relaxation times T 1 across 22 qubits are consistently matched with a single model involving resonator loss, ohmic charge noise and 1/f -flux noise, a noise source previously considered primarily in the context of dephasing. We furthermore demonstrate that qubit dephasing at the flux-insensitive point is dominated by residual thermal-photons in the readout resonator. The resulting photon shot noise is mitigated using a dynamical decoupling protocol, resulting in T 2 ≈85 μs, approximately the 2 T 1 limit. In addition to realizing an improved flux qubit, our results uniquely identify photon shot noise as limiting T 2 in contemporary qubits based on transverse qubit–resonator interaction.
We report experiments on superconducting flux qubits in a circuit quantum electrodynamics (cQED) setup. Two qubits, independently biased and controlled, are coupled to a coplanar waveguide resonator. Dispersive qubit state readout reaches a maximum contrast of 72%. We measure energy relaxation times at the symmetry point of 5 and $10\ensuremath{\mu}\mathrm{s}$, corresponding to 7 and $20\ensuremath{\mu}\mathrm{s}$ when relaxation through the resonator due to Purcell effect is subtracted out, and levels of flux noise of 2.6 and $2.7\phantom{\rule{0.222222em}{0ex}}\ensuremath{\mu}{\mathrm{\ensuremath{\Phi}}}_{0}/\sqrt{\text{Hz}}$ at 1 Hz for the two qubits. We discuss the origin of decoherence in the measured devices. The strong coupling between the qubits and the cavity leads to a large, cavity-mediated, qubit-qubit coupling. This coupling, which is characterized spectroscopically, reaches 38 MHz. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.