The role of source cloud spatial coherence in a Mach-Zehnder-type atom interferometer is experimentally investigated. The visibility and contrast of a Bose-Einstein condensate (BEC) and three thermal sources with varying spatial coherence are compared as a function of interferometer time. At short times, the fringe visibility of a BEC source approaches $100%$ nearly independent of $\ensuremath{\pi}$ pulse efficiency, while thermal sources have fringe visibilities limited to the $\ensuremath{\pi}$ pulse efficiency. More importantly for precision measurement systems, the BEC source maintains interference at interferometer times significantly beyond the thermal source.
The role of source cloud spatial coherence in a Mach-Zehnder-type atom interferometer is experimentally investigated. The visibility and contrast of a Bose-Einstein condensate (BEC) and three thermal sources with varying spatial coherence are compared as a function of interferometer time. At short times, the fringe visibility of a BEC source approaches 100 nearly independent of \ensuremathπ pulse efficiency, while thermal sources have fringe visibilities limited to the \ensuremathπ pulse efficiency. More importantly for precision measurement systems, the BEC source maintains interference at interferometer times significantly beyond the thermal source.
The coherence properties of a gas of bosonic atoms above the Bose-Einstein-condensation transition temperature were studied. Bragg diffraction was used to create two spatially separated wave packets, which interfere during expansion. Given sufficient expansion time, high fringe contrast could be observed in a cloud of arbitrary temperature. Fringe visibility greater than 90% was observed, which decreased with increasing temperature, in agreement with a simple model. When the sample was ``filtered'' in momentum space using long, velocity-selective Bragg pulses, the contrast was significantly enhanced in contrast to predictions.
This study demonstrates a Mach–Zehnder-type internal-state atom interferometer in a sodium F = 1 spinor Bose–Einstein condensate (BEC), which is realized by applying a three-pulse radio-frequency sequence (π/2–π–π/2) to manipulate the two magnetic sublevels |1,−1⟩ and |1,0⟩. Phase-scanning experiments show that the visibility remains at a high level across all three pulse stages (V>0.77). In the hold-time scanning measurements, the visibility decays exponentially with hold time, yet the system maintains good coherence. This work establishes a foundation for precision measurements based on internal-state atom interferometers, as the approach simplifies the experimental apparatus while maintaining good quantum coherence and high-contrast interference fringes.
An atom interferometer is a sensitive device that has potential for many useful applications. Atoms are sensitive to electromagnetic fields due to their electric and magnetic moments and their mass allows them to be deflected in a gravitational field, thereby making them attractive for measuring inertial forces. The narrow momentum distribution of Bose-Einstein condensate (BEC) is a great asset in realizing portable atom interferometers. An example is a guided-wave atom interferometer that uses a confining potential to guide the motion of the condensate. Despite the promise of guided-wave atom interferometry with BEC, spatial phase and phase diffusion limit the contrast of the interference fringes. The control of these phases is required for successful development of a BEC-based guided-wave atom interferometer. This thesis analyses the guided-wave atom interferometer, where an atomic BEC cloud at the center of a confining potential is split into two clouds that move along different arms of the interferometer. The clouds accumulate relative phase due to the environment, spatially inhomogeneous trapping potential and atom-atom interactions within the condensate. At the end of the interferometric cycle, the clouds are recombined producing a cloud at rest and moving clouds. The number of atoms in the clouds that emerge depends on the relative phase accumulated by the clouds during propagation. This is investigated by deriving an expression for the probability of finding any given number of atoms in the clouds that emerge after recombination. Characteristic features like mean, standard deviation and cross-correlation function of the probability density distribution are calculated and the contrast of the interference fringes is optimized. This thesis found that optimum contrast is achieved through the control of total population of atoms in the condensate, trap frequencies, s-wave scattering length, and the duration of the interferometric cycle.
Bose-Einstein condensates are coherent matter waves, produced by cooling gaseous atomic clouds to ultra-low temperatures. For applications in atom interferometry and precision measurements, Bose-condensed sources present an intriguing alternative to thermal atoms. Although the current sensitivity achievable with interferometers using coherent atoms is not comparable to thermal beam machines (mainly due to the lower flux), there are promising ways to utilise the potential of Bose-condensed sources for atom interferometry. Among those is the low momentum width of Bose-Einstein condensates, which can generally be well controlled and is advantageous for increased interferometric sensitivities by implementing large momentum transfer beam splitters. As part of this thesis, experimental and theoretical investigations are presented to investigate the potential of Bose-Einstein condensates for such applications. We shall present the quantum projection noise limited performance of a Ramsey interferometer operating on the atomic clock transition of a freely expanding cloud of Bose-condensed rubidium 87 atoms. The results include Ramsey fringes of high visibility, not measurably affected by atomic interaction-induced dephasing effects. The achievement and detection of the quantum projection noise limit rely critically on the precision and accuracy of both the imaging setup and the coupling scheme in the interferometric beam splitters. The stabilisation of the beam splitters via an optical Sagnac interferometer is the basis for the quantum projection noise limited performance of the interferometer presented. For an increase of bandwidth and flux in atom interferometric measurements, it is advantageous to use a continuous atomic beam. A truly continuous coherent atom source has not been realised to date, and we present results on a pumping mechanism in this thesis, as a decisive step towards a continuous atom laser. By the investigation of different momentum resonances, we find that the pumping scheme relies on a Raman superradiance-like process. Finally, the thesis demonstrates two interaction measurements in rubidium. The strong mean field interactions due to the high densities in Bose-Einstein condensates are used to probe the potential of a rubidium 87 condensate with an atom laser. The measurement allows a determination of the scattering length between the two atomic states involved. In addition to this two-body scattering scheme, we present a measurement of three-body loss coefficients, extracted from loss curves in rubidium 85 Bose-Einstein condensates. The measurement provides new upper bounds on the three-body loss coefficients at the scattering lengths considered.
This thesis contributes to the debate over the viability of using Bose-condensed sources to improve the sensitivity of atom interferometers. Specifically, we present theoretical investigations into (1) the effect of source momentum width on large momentum transfer (LMT) atom interferometry with Bragg pulses, and (2) the prospect of stabilising a high flux, narrow linewidth, continuously pumped atom laser via measurement-based feedback control of the BEC that forms the lasing mode of the atom laser. To begin, this thesis considers the effect of the atomic source's momentum width on the phase sensitivity of Bragg pulse atom interferometers in the Mach-Zehnder configuration. We show that an atomic cloud's momentum width places a fundamental upper bound on the maximum transfer efficiency of a Bragg mirror pulse, and furthermore limits the phase sensitivity of a Bragg pulse atom interferometer. We quantify these momentum width effects and precisely compute how mirror efficiencies and interferometer phase sensitivities vary as functions of Bragg order and source type. In particular, we show that narrow momentum width Bose-condensed sources give comparable sensitivities to broad momentum width thermal sources, even after incorporating the lower atom flux of Bose-condensed sources. Coupled with other favourable properties of Bose-condensed sources, such as their high tolerance to classical noise due to optical wavefront aberrations and the Coriolis effect, this suggests that LMT Bragg atom interferometry with Bose-condensed sources should yield improved sensitivities over current inertial sensors. Furthermore, our results and methodology allow for the efficient optimisation of Bragg pulses, which will help in the design of LMT Bragg mirrors and beamsplitters for atom-interferometer-based inertial sensors, irrespective of source type. In the second part of this thesis, we investigate the prospect of measurement-based feedback control of a BEC, with the aim of reducing density fluctuations by cooling the condensate to a stable spatial mode. Firstly, we consider the effects of experimental imperfections on the estimation-based feedback control of a weakly-interacting BEC undergoing continuous position measurement. These limitations violate the assumption that the estimator (i.e., filter) accurately models the underlying system, thus requiring a separate analysis of the system and filter dynamics. We show that the control scheme is robust to detector inefficiency, time delay, technical noise and miscalibrated parameters. These results imply that reasonable experimental imperfections do not limit the feasibility of cooling a BEC by continuous measurement and feedback. Secondly, we designed a feedback-control scheme for a trapped condensate, with interatomic interactions of any strength, based on a phase-contrast imaging setup. We derive the filtering equation for the system, and show that it gives a continuous measurement of the condensate's density. A semiclassical analysis of this control scheme shows that feedback-cooling of an interacting BEC is also possible, and that the interatomic interactions actually increase the effectiveness of the control. Therefore, measurement-based feedback control can stabilise the spatial mode of a BEC, which is a requirement for the high flux, narrow linewidth, continuously pumped atom laser sources that could potentially give inertial measurement sensitivities orders of magnitude beyond current state-of-the-art devices.
This chapter describes the Bose--Einstein condensate (BEC) interferometry. We first introduce the optical interferometer, briefly discussing the role of fringe contrast in observing interference patterns. Next, we examine a BEC interferometer in a Michelson geometry that consists of a BEC in a trapping potential well. The BEC cloud in the potential well is put into a linear superposition of two clouds that travel along different paths in the trap and are recombined using the same light beams. By studying the population of atoms in the different motional states of the BEC clouds that emerge after recombination, we obtain information about the relative phase shift accumulated by the two traveling superposed condensates during the interferometry. We then characterize the atom distribution that is found in the output of the interferometer by finding the probability density distribution and calculating the features of the probability density such as the mean, the variance, and the interference fringe contrast. Finally, we parameterize the effect of two-body collisional interactions on the observed interference fringes in a way that can be directly controlled in an experiment.