We study theoretically the dynamics of multiple mechanical oscillators coupled to a single cavity field mode via linear or quadratic optomechanical interactions. We focus specifically on the strong-coupling regime where the cavity decays much faster than the mechanical modes, and the optomechanical coupling is comparable to or larger than the mechanical frequency, so that both the optical and mechanical systems operate in the deep quantum regime. Using the examples of one and two mechanical oscillators, we show that the system can classically exhibit bistability and bifurcations, and we explore how these manifest themselves in interference, entanglement, and correlation in the quantum theory, while revealing the impact of decoherence of the mechanical system due to cavity fluctuations and coherent driving.
We study theoretically the dynamics of multiple mechanical oscillators coupled to a single cavity field mode via linear or quadratic optomechanical interactions. We focus specifically on the strong-coupling regime where the cavity decays much faster than the mechanical modes, and the optomechanical coupling is comparable to or larger than the mechanical frequency, so that both the optical and mechanical systems operate in the deep quantum regime. Using the examples of one and two mechanical oscillators, we show that the system can classically exhibit bistability and bifurcations, and we explore how these manifest themselves in interference, entanglement, and correlation in the quantum theory, while revealing the impact of decoherence of the mechanical system due to cavity fluctuations and coherent driving.
In the field of optomechanics, one typically studies the interaction of a single mechanical resonator and a single optical cavity mode. In this thesis, we investigate collective quantum effects in optomechanical systems with two or more optical and mechanical modes. First, we study the generation and destruction of entanglement between two mechanical resonators effected by optical cavity fields. We also describe how the optomechanical interaction can be employed to mediate strong coherent coupling and entanglement between a micromechanical membrane and a single atom. Secondly, we show that a configuration with two optical and a single mechanical mode can lead to enhanced nonlinear interactions, which can be exploited for quantum non-demolition measurements of the phonon and photon numbers. Finally, we explore the quantum many-body dynamics of optomechanical arrays. In particular, we research into the transition from a disordered state due to quantum noise to a state with phasecoherent mechanical oscillations. As an intermediate step towards this study, we also investigate the nonlinear classical dynamics of single- and multi-mode optomechanical setups and compare theoretical predictions to experimental data.
The realization of multimode optomechanical interactions in the single-photon strong-coupling regime is a desired task in cavity optomechanics, but it remains a big challenge in realistic physical systems. In this work we propose a reliable scheme to simulate a three-mode optomechanical system working in the single-photon strong-coupling regime based on the Fredkin-type interaction. This is achieved by utilizing two strong drivings to the two exchange-coupled modes in the Fredkin-type coupling involving one optical mode and two mechanical-like modes. As an application of this enhanced three-mode nonlinear optomechanical coupling, we show how to generate entangled cat states of the mechanical-like modes using the conditional displacement mechanism. The quantum coherence effects in the generated states are investigated by calculating the two-mode joint Wigner function and quantum entanglement. The influence of the system dissipation on the state generation is also considered. This work will open up a different route to the study of multimode optomechanical interactions at the single-photon level.
Quantum entanglement and squeezing associated with the motions of massive mechanical oscillators play an essential role in both fundamental science and emerging quantum technologies, yet realizing such macroscopic nonclassical states remains a formidable challenge. In this paper, we investigate how to achieve strong optomechanical entanglement and mechanical squeezing in a membrane-embedded cavity optomechanical system incorporating a coherent feedback loop, where the membrane interacts with the cavity mode through both linear and quadratic optomechanical couplings. This hybrid optomechanical architecture offers a flexible tunability of intrinsic system parameters, thereby enabling controlled stiffening or softening of the mechanical mode through adjusting quadratic optomechanical coupling, as well as effective modulation of the cavity decay rate via feedback control. More importantly, the synergistic interplay effect allows for a strategic reconfiguration of the system's stability regime, which in turn permits the presence of significantly enhanced effective optomechanical coupling strengths before entering the unstable regime. Exploiting these unique features, we demonstrate that optomechanical entanglement can be substantially enhanced with positive coupling sign and suitable feedback parameters, while strong mechanical squeezing beyond the 3dB limit is simultaneously achieved over a broad parameter range with negative coupling sign, reaching squeezing degree above 10dB under optimized conditions. Our proposal, establishing an all-optical method for generating highly entangled or squeezed states in cavity optomechanical systems, opens up a new route to explore macroscopic quantum effects and to advance quantum information processing.
Quantum entanglement and squeezing associated with the motions of massive mechanical oscillators play an essential role in both fundamental science and emerging quantum technologies, yet realizing such macroscopic nonclassical states remains a formidable challenge. In this paper, we investigate how to achieve strong optomechanical entanglement and mechanical squeezing in a membrane-embedded cavity optomechanical system incorporating a coherent feedback loop, where the membrane interacts with the cavity mode through both linear and quadratic optomechanical couplings. This hybrid optomechanical architecture offers a flexible tunability of intrinsic system parameters, thereby enabling controlled stiffening or softening of the mechanical mode through adjusting quadratic optomechanical coupling, as well as effective modulation of the cavity decay rate via feedback control. More importantly, the synergistic interplay effect allows for a strategic reconfiguration of the system's stability regime, which in turn permits the presence of significantly enhanced effective optomechanical coupling strengths before entering the unstable regime. Exploiting these unique features, we demonstrate that optomechanical entanglement can be substantially enhanced with positive coupling sign and suitable feedback parameters, while strong mechanical squeezing beyond the 3dB limit is simultaneously achieved over a broad parameter range with negative coupling sign, reaching squeezing degree above 10dB under optimized conditions. Our proposal, establishing an all-optical method for generating highly entangled or squeezed states in cavity optomechanical systems, opens up a new route to explore macroscopic quantum effects and to advance quantum information processing.
We theoretically investigate a quadratic optomechanical system comprising a single-mode optical cavity linearly coupled to one mechanical resonator and quadratically coupled to a second resonator. By tuning the cavity detuning and optomechanical coupling strengths, we demonstrate the transition from optical bistability to multistability with up to seven steady-state solutions. Notably, simultaneous ground-state cooling of both mechanical resonators occurs on the dynamically stable branch of the nonlinear steady-state solutions, offering new opportunities for combined nonlinear optical and quantum cooling functionalities. Beyond the multistable regime, we systematically study dual-mode ground-state cooling and find that robust simultaneous cooling can be achieved over a broad parameter range, except when the linear and quadratic couplings become comparable, where a dark-mode effect arises. In this case, tuning the second-order optomechanical-induced frequency shifts effectively suppresses dark-mode interference, enabling controllable and simultaneous ground-state cooling. Our results provide a versatile framework for engineering multimode quantum states in optomechanical systems and open new avenues for the development of multifunctional quantum devices, including ultra-sensitive sensors, scalable quantum memories, and integrated quantum networks.
Harmonic oscillators might be one of the most fundamental entities described by physics. Yet they stay relevant in recent research. The topological properties associated with exceptional points that can occur when two modes interact have generated much interest in recent years. Harmonic oscillators are also at the heart of new quantum technological applications: the long lifetime of high-Q resonators make them advantageous as quantum memories, and they are employed for narrowband processing of quantum signals, as in Josephson parametric amplifiers. The goal of this thesis is to explore different fundamental regimes of two coupled harmonic oscillators using cavity optomechanics as the experimen- tal platform. With consistent progress in attaining ever increasing Q factors, mechanical and electromagnetic resonators realize near-ideal harmonic oscillators. By parametrically modulating the nonlinear optomechanical interaction between them, an effective linear coupling is achieved, which is tunable in strength and in the relative frequencies of the two modes. Thus cavity optomechanics provides a framework with excellent control over system parameters for the study of two coupled harmonic modes. The specific optomechanical implementation employed are superconducting circuits with the vibrating top plate of a capacitor as the mechanical element. Multimode optomechanical circuits are realized, with two microwave modes interacting with one or two mechanical oscillators. The supplementary modes serve either as intermediaries in the relation of the two modes of interest, or as auxiliaries used to control a parameter of the system. Three main experimental results are achieved. First, an auxiliary microwave mode allows the engineering of the effective dissipation rate of a mechanical oscillator. The latter then acts as a reservoir for the main microwave mode with which it interacts. The microwave mode susceptibility can be tuned, resulting in an instability akin to that of a maser and in resonant amplification of incoming microwave signals with an added noise close to the quantum minimum. Second, we study the conditions for a nonreciprocal interaction between two microwave modes, when the information flows in one direction but not in the other. The two modes interact through two mechanical oscillators, leading to frequency conversion between the two cavities. Dissipation in the mechanical modes is essential to the scheme in two ways: it provides a reciprocal phase necessary for the interference and eliminates the unwanted signals. Third, level attraction between a microwave and a mechanical mode is demonstrated, where the eigenfrequencies of the system are drawn closer as the result of interaction, rather distancing themselves as in the more usual case of level repulsion. The phenomenon is theoretically connected to exceptional points, and a general classification of the possible regimes of interaction between two harmonic modes is exposed, including level repulsion and attraction as special cases.