Tapered fiber coupling of single photons emitted by a deterministically positioned single nitrogen vacancy center
Lars Liebermeister, Fabian Petersen, Asmus v. Münchow, Daniel Burchardt, Juliane Hermelbracht, Toshiyuki Tashima, Andreas Wolfgang Schell, Oliver J. Benson, Thomas Meinhardt, Anke Krueger, Ariane Stiebeiner, Arno Rauschenbeutel, Harald Weinfurter, Markus Weber
A diamond nano-crystal hosting a single nitrogen vacancy (NV) center is optically selected with a confocal scanning microscope and positioned deterministically onto the subwavelength-diameter waist of a tapered optical fiber (TOF) with the help of an atomic force microscope. Based on this nano-manipulation technique, we experimentally demonstrate the evanescent coupling of single fluorescence photons emitted by a single NV-center to the guided mode of the TOF. By comparing photon count rates of the fiber-guided and the free-space modes and with the help of numerical finite-difference time domain simulations, we determine a lower and upper bound for the coupling efficiency of (9.5 ± 0.6)% and (10.4 ± 0.7)%, respectively. Our results are a promising starting point for future integration of single photon sources into photonic quantum networks and applications in quantum information science.
A diamond nano-crystal hosting a single nitrogen vacancy (NV) center is optically selected with a confocal scanning microscope and positioned deterministically onto the subwavelength-diameter waist of a tapered optical fiber (TOF) with the help of an atomic force microscope. Based on this nano-manipulation technique, we experimentally demonstrate the evanescent coupling of single fluorescence photons emitted by a single NV-center to the guided mode of the TOF. By comparing photon count rates of the fiber-guided and the free-space modes and with the help of numerical finite-difference time domain simulations, we determine a lower and upper bound for the coupling efficiency of (9.5 ± 0.6)% and (10.4 ± 0.7)%, respectively. Our results are a promising starting point for future integration of single photon sources into photonic quantum networks and applications in quantum information science.
The interaction of photons with individual quantum systems is a very fundamental process in physics. Thereby, the emission rate as well as the angular emission pattern of a quantum emitter are not only a function of intrinsic properties of the emitter itself, but are also strongly modified by its surrounding. For instance, by restricting the optical modes which are allowed at the position of the dipole, the emission rate can be strongly modified and the emitted photons can be directed into specific optical modes. This effect can be demonstrated by the interaction of a single optically active quantum emitter with the strongly confined optical mode of a single-mode dielectric waveguide. Efficient coupling of the emitter to the dielectric structure can be achieved by placing the quantum emitter inside the evanescent field of the guided mode. This evanescent field coupling mechanism is discussed and demonstrated experimentally. A single nitrogen-vacancy center (NV-center), hosted in a nanodiamond is deterministically coupled to a tapered optical fiber (TOF) via the evanescent field of its guided mode (coupling efficiencies exceeding 30% are predicted). By employing an AFM-based nanomanipulation technique, the diamond nanocrystal is placed on the nanofiber waist of the TOF. Beforehand, the diamond nanocrystal has been characterized to guarantee that it hosts only one fluorescing NV-center. While the diamond nanocrystal is optically exited, single photon fluorescence of the NV-center is detected at both outputs of the tapered optical fiber. This verifies the evanescent coupling of the emitter to the guided mode. In order to quantify the coupling, the comparison of the emission rate into free space with the rate into the fiber yields that 10.0(5) of the emitted photons are coupled into the tapered optical fiber. In the determination of this value, the orientation of the emitting dipoles and the emission pattern, which are modified by the TOF, have been considered. The NV-center features a broad emission spectrum which can be used to investigate the wavelength-dependence of the coupling. Comparing the spectra of the emission into the fiber mode with the emission into free space modes roughly resembles the expected wavelength dependency of the coupling efficiency. The evanescent coupling and the deterministic positioning of preselected fluorescing diamond nanocrystals, which has been demonstrated with the TOF, can be applied to other waveguide structures as well. Dielectric single-mode waveguides made of Ta2O5 on a SiO2 substrate promise similar coupling efficiencies to tapered optical fibers (above 30%). With the design of the on-chip wave-guiding structure being flexible, the combination with other optical on-chip elements is feasible, rendering it a promising platform for on-chip photonic experiments. Test structures of this waveguide design are realized using lithographic processes and are characterized. These waveguides are equipped with inverted taper structures to allow efficient off-chip coupling with butt-coupling to standard single-mode fibers. The evanescent coupling of a single quantum emitter to a singe optical mode can be used to efficiently collect emission of the quantum emitter. This can help building a compact single photon source and is beneficial for the optical read-out of the quantum emitter's internal degree of freedom, which can be either used as probe (sensing) or as information-storage. Utilizing the high coupling efficiency, for instance, the non-linearities of the quantum system can be exploited to build a single photon transistor. The evanescent coupling is very broadband (about hundred nanometers), allowing to efficiently collect emission from broadband emitters like the NV-center, but it can also be used for multi-wavelength manipulation schemes.
A central goal in quantum information science is to efficiently interface photons with single optical modes for quantum networking and distributed quantum computing. Here, we introduce and experimentally demonstrate a compact and efficient method for the low-loss coupling of a solid-state qubit, the nitrogen vacancy (NV) center in diamond, with a single-mode optical fiber. In this approach, single-mode tapered diamond waveguides containing exactly one high quality NV memory are selected and integrated on tapered silica fibers. Numerical optimization of an adiabatic coupler indicates that near-unity-efficiency photon transfer is possible between the two modes. Experimentally, we find an overall collection efficiency between 16% and 37% and estimate a single photon count rate at saturation above 700 kHz. This integrated system enables robust, alignment-free, and efficient interfacing of single-mode optical fibers with single photon emitters and quantum memories in solids.
Tapered optical fibers are promising one-dimensional nanophotonic waveguides that can provide efficient coupling between their fundamental mode and quantum nanoemitters placed inside them. Here, we present numerical studies on the coupling of single nitrogen-vacancy (NV) centers (single point dipoles) in nanodiamonds with tapered fibers. Our results lead to two important conclusions: (1) A maximum coupling efficiency of 53.4% can be realized for the two fiber ends when the NV bare dipole is located at the center of the tapered fiber. (2) NV centers even in 100-nm-sized nanodiamonds where bulk-like optical properties were reported show a coupling efficiency of 22% at the taper surface, with the coupling efficiency monotonically decreasing as the nanodiamond size increases. These results will be helpful in guiding the development of hybrid quantum devices for applications in quantum information science.
A central goal in quantum information science is to efficiently interface photons with single optical modes for quantum networking and distributed quantum computing. Here, we introduce and experimentally demonstrate a compact and efficient method for the low-loss coupling of a solid-state qubit, the nitrogen vacancy (NV) center in diamond, with a single-mode optical fiber. In this approach, single-mode tapered diamond waveguides containing exactly one high quality NV memory are selected and integrated on tapered silica fibers. Numerical optimization of an adiabatic coupler indicates that near-unity-efficiency photon transfer is possible between the two modes. Experimentally, we find an overall collection efficiency between 16% and 37% and estimate a single photon count rate at saturation above 700 kHz. This integrated system enables robust, alignment-free, and efficient interfacing of single-mode optical fibers with single photon emitters and quantum memories in solids. A compact way to efficiently couple a solid-state qubit, the nitrogen vacancy center in diamond, with a single-mode optical fiber is shown. The ability to efficiently couple stationary quantum memories to a single spatial mode in a silica fiber is highly desired for various applications in quantum information processing. Now, Rishi Patel and co-workers, working in the group of Dirk Englund at the Massachusetts Institute of Technology have proposed and experimentally demonstrated an approach involving adiabatic power transfer between a tapered silica fiber and a single-mode micro-waveguide made from high-quality diamond. This integrated diamond–silica waveguide system enables optical collection from nitrogen vacancy centers with overall efficiencies in the range 16%–37%—a roughly four-fold improvement over previous approaches that employed diamond point emitters rather than waveguiding structures. Numerical optimization analysis suggests that near-unity efficiencies are theoretically feasible.
Further miniaturization of funcionalized quantum optical systems down to nm-dimensions and their integration into fibre optical networks is a major challange for future implementations of quantum information, quantum communication and quantum processing applications. Furthermore, scalability, long-term stability and room- as well as liquid helium temperature operation are benchmarking properties of such systems. In this paper, we present the realizations of fiber-coupled diamond-based single photon systems. First, an alignment free, μm-scale single photon source consisting of a single nitrogen vacancy center facet coupled to an optical fiber operating at room temperature is presented. Near-field coupling of the single nitrogen vacancy center is realized by placing a pre-selected nanodiamond directly on the fiber facet in a bottom-up approach. Its photon collection efficiency is comparable to a far-field collection via an air objective with a numerical aperture of 0.82. As the system can be simultaneously excited and its photons be recollected through the fiber, it can be used as a fiber-connected single quantum sensor that allows optical near-field probing on the quantum level. Secondly single nanodiamonds that contain nitrogen vacancy defect centers, are near-field coupled to a tapered fiber of 300 nanometer in diameter. This system provides a record-high number of 97 kcps single photons from a single defect center into a single mode optical fiber. The entire system can be cooled to liquid Helium temperatures and reheated without breaking. Furthermore, the system can be evanescently coupled to various nanophotonic structures, e.g. microresonators. The system can also be applied for integrated quantum transmission experiments and the realization of two-photon interference. It can be used as a quantum-randomnumber generator as well as a probe for nano-magnetometry.
Nitrogen-Vacancy (NV) centers in diamond are promising solid-state quantum emitters that can be utilized for photonic quantum applications. Various diamond nanophotonic devices have been fabricated for efficient extraction of single photons emitted from NV centers to a single guided mode. However, for constructing scalable quantum networks, further efficient coupling of single photons to a guided mode of a single-mode fiber (SMF) is indispensable and a difficult challenge. Here, we propose a novel efficient hybrid system between an optical nanofiber and a cylindrical-structured diamond nanowire. The maximum coupling efficiency as high as 75% for the sum of both fiber ends is obtained by numerical simulations. The proposed hybrid system will provide a simple and efficient interface between solid-state quantum emitters and a SMF suitable for constructing scalable quantum networks.