Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1308.6716 · Review of Scientific Instruments

Note: Cryogenic coaxial microwave filters

Giovanna Tancredi, Simon Schmidlin, P. J. Meeson

Published Feb 1, 2014• 9 citations
arXivHTMLPDF

Abstract

The careful filtering of microwave electromagnetic radiation is critical for controlling the electromagnetic environment for experiments in solid-state quantum information processing and quantum metrology at millikelvin temperatures. We describe the design and fabrication of a coaxial filter assembly and demonstrate that its performance is in excellent agreement with theoretical modelling. We further perform an indicative test of the operation of the filters by making current-voltage measurements of small, underdamped Josephson junctions at 15 mK.

DOI
10.1063/1.4863881

Related papers

Robust cryogenic matched low-pass coaxial filters for quantum computing applications

Andrey A. Samoylov, Аnton I. Ivanov, Vladimir V. Echeistov +5 more

Electromagnetic noise is one of the key external factors decreasing superconducting qubits coherence. Matched coaxial filters can prevent microwave and IR photons negative influence on superconducting quantum circuits. Here, we report on design and fabrication route of matched low-pass coaxial filters for noise-sensitive measurements at milliKelvin temperatures. A robust transmission coefficient with designed linear absorption (-1dB/GHz) and ultralow reflection losses less than -20 dB up to 20 GHz is achieved. We present a mathematical model for evaluating and predicting filters transmission parameters depending on their dimensions. It is experimentally approved on two filters prototypes different lengths with compound of Cu powder and Stycast commercial resin demonstrating excellent matching. The presented design and assembly route are universal for various compounds and provide high repeatability of geometrical and microwave characteristics. Finally, we demonstrate three filters with almost equal reflection and transmission characteristics in the range from 0 to 20 GHz, which is quite useful to control multiple channel superconducting quantum circuits.

arXiv:2210.15301•Oct 27, 2022•0 citations

Robust cryogenic matched low-pass coaxial filters for quantum computing applications

Аnton I. Ivanov, Victor I. Polozov, Vladimir V. Echeistov +5 more

Electromagnetic noise is one of the main external factors decreasing superconducting qubit coherence. Matched coaxial filters can prevent microwave and IR photons' negative influence on superconducting quantum circuits. In this report, we describe the design and fabrication process of matched coaxial filters for noise-sensitive measurements at millikelvin temperatures. A robust transmission coefficient and ultralow reflection loss of −20 dB in the frequency range up to 20 GHz is achieved. Fabricated low-pass filters have linear transmission and reflection characteristics with 3 dB-cutoff frequency of 1.5–2.5 GHz. A method for extracting the propagation constant and filter impedance from scattering parameter measurements is demonstrated. This method is experimentally approved on a filter with a compound of Cu powder and Stycast epoxy resin and a filter filled with ECCOSORB CR-110 epoxy resin. The proposed design and assembly technology are versatile for various compounds and provide highly repeatable geometric and microwave characteristics. Furthermore, we demonstrate that these low-pass coaxial filters can be effectively utilized to improve superconducting qubit relaxation due to suppressing standing waves originating from reflections in control coaxial cables.

Applied Physics Letters•Nov 13, 2023•11 citations

Engineering the microwave to infrared noise photon flux for superconducting quantum systems

Sergey Danilin, João Barbosa, Michael Farage +6 more

Electromagnetic filtering is essential for the coherent control, operation and readout of superconducting quantum circuits at milliKelvin temperatures. The suppression of spurious modes around transition frequencies of a few GHz is well understood and mainly achieved by on-chip and package considerations. Noise photons of higher frequencies - beyond the pair-breaking energies - cause decoherence and require spectral engineering before reaching the packaged quantum chip. The external wires that pass into the refrigerator and go down to the quantum circuit provide a direct path for these photons. This article contains quantitative analysis and experimental data for the noise photon flux through coaxial, filtered wiring. The attenuation of the coaxial cable at room temperature and the noise photon flux estimates for typical wiring configurations are provided. Compact cryogenic microwave low-pass filters with CR-110 and Esorb-230 absorptive dielectric fillings are presented along with experimental data at room and cryogenic temperatures up to 70 GHz. Filter cut-off frequencies between 1 to 10 GHz are set by the filter length, and the roll-off is material dependent. The relative dielectric permittivity and magnetic permeability for the Esorb-230 material in the pair-breaking frequency range of 75 to 110 GHz are measured, and the filter properties in this frequency range are calculated. The estimated dramatic suppression of the noise photon flux due to the filter proves its usefulness for experiments with superconducting quantum systems.

arXiv:2107.09331•EPJ Quantum Technology•Jan 15, 2022•29 citations

Cryogenic microwave frequency filters beyond 20 GHz and their impact on superconducting quantum circuits

Sergey Danilin, João Barbosa, Zimo Zhao +4 more

Bulletin of the American Physical Society•Mar 17, 2021•0 citations

Development of a Josephson junction based single photon microwave detector for axion detection experiments

D Alesini, D Babusci, C. Barone +30 more

Abstract Josephson junctions, in appropriate configurations, can be excellent candidates for detection of single photons in the microwave frequency band. Such possibility has been recently addressed in the framework of galactic axion detection. Here are reported recent developments in the modelling and simulation of dynamic behaviour of a Josephson junction single microwave photon detector. For a Josephson junction to be enough sensitive, small critical currents and operating temperatures of the order of ten of mK are necessary. Thermal and quantum tunnelling out of the zero-voltage state can also mask the detection process. Axion detection would require dark count rates in the order of 0.001 Hz. It is, therefore, is of paramount importance to identify proper device fabrication parameters and junction operation point.

arXiv:2107.01118•Journal of Physics Conference Series•Jun 1, 2020•13 citations

RF and microwave metrology for quantum computing – recent developments at the UK’s National Physical Laboratory

Manoj Stanley, Xiaobang Shang, Murat Celep +9 more

Abstract Development of large-scale quantum computing systems will require radio frequency (RF) and microwave technologies operating reliably at cryogenic temperatures down to tens of milli-Kelvin (mK). The quantum bits in the most promising quantum computing technologies such as the superconducting quantum computing are designed using principles of microwave engineering and operated using microwave signals. The control, readout, and coupling of qubits are implemented using a network of microwave components operating at various temperature stages. To ensure reliable operation of quantum computing systems, it is critical to ensure optimal performance of these microwave components and qubits at their respective operating temperatures, which can be as low as mK temperatures. It is, therefore, critical to understand the microwave characteristics of waveforms, components, circuits, networks, and systems at cryogenic temperatures. The UK’s National Physical Laboratory (NPL) is focussed on developing new microwave measurement capabilities through the UK’s National Quantum Technologies Programme to address various microwave test and measurement challenges in quantum computing. This includes the development of various measurement capabilities to characterize the microwave performance of quantum and microwave devices and substrate materials at cryogenic temperatures. This paper summarizes the roadmap of activities at NPL to address these microwave metrology challenges in quantum computing.

International Journal of Microwave and Wireless Technologies•Apr 25, 2024•8 citations
The careful filtering of microwave electromagnetic radiation is critical for controlling the electromagnetic environment for experiments in solid-state quantum information processing and quantum metrology at millikelvin temperatures. We describe the design and fabrication of a coaxial filter assembly and demonstrate that its performance is in excellent agreement with theoretical modelling. We further perform an indicative test of the operation of the filters by making current-voltage measurements of small, underdamped Josephson junctions at 15 mK.
Electromagnetic noise is one of the key external factors decreasing superconducting qubits coherence. Matched coaxial filters can prevent microwave and IR photons negative influence on superconducting quantum circuits. Here, we report on design and fabrication route of matched low-pass coaxial filters for noise-sensitive measurements at milliKelvin temperatures. A robust transmission coefficient with designed linear absorption (-1dB/GHz) and ultralow reflection losses less than -20 dB up to 20 GHz is achieved. We present a mathematical model for evaluating and predicting filters transmission parameters depending on their dimensions. It is experimentally approved on two filters prototypes different lengths with compound of Cu powder and Stycast commercial resin demonstrating excellent matching. The presented design and assembly route are universal for various compounds and provide high repeatability of geometrical and microwave characteristics. Finally, we demonstrate three filters with almost equal reflection and transmission characteristics in the range from 0 to 20 GHz, which is quite useful to control multiple channel superconducting quantum circuits.
Electromagnetic noise is one of the main external factors decreasing superconducting qubit coherence. Matched coaxial filters can prevent microwave and IR photons' negative influence on superconducting quantum circuits. In this report, we describe the design and fabrication process of matched coaxial filters for noise-sensitive measurements at millikelvin temperatures. A robust transmission coefficient and ultralow reflection loss of −20 dB in the frequency range up to 20 GHz is achieved. Fabricated low-pass filters have linear transmission and reflection characteristics with 3 dB-cutoff frequency of 1.5–2.5 GHz. A method for extracting the propagation constant and filter impedance from scattering parameter measurements is demonstrated. This method is experimentally approved on a filter with a compound of Cu powder and Stycast epoxy resin and a filter filled with ECCOSORB CR-110 epoxy resin. The proposed design and assembly technology are versatile for various compounds and provide highly repeatable geometric and microwave characteristics. Furthermore, we demonstrate that these low-pass coaxial filters can be effectively utilized to improve superconducting qubit relaxation due to suppressing standing waves originating from reflections in control coaxial cables.
Electromagnetic filtering is essential for the coherent control, operation and readout of superconducting quantum circuits at milliKelvin temperatures. The suppression of spurious modes around transition frequencies of a few GHz is well understood and mainly achieved by on-chip and package considerations. Noise photons of higher frequencies - beyond the pair-breaking energies - cause decoherence and require spectral engineering before reaching the packaged quantum chip. The external wires that pass into the refrigerator and go down to the quantum circuit provide a direct path for these photons. This article contains quantitative analysis and experimental data for the noise photon flux through coaxial, filtered wiring. The attenuation of the coaxial cable at room temperature and the noise photon flux estimates for typical wiring configurations are provided. Compact cryogenic microwave low-pass filters with CR-110 and Esorb-230 absorptive dielectric fillings are presented along with experimental data at room and cryogenic temperatures up to 70 GHz. Filter cut-off frequencies between 1 to 10 GHz are set by the filter length, and the roll-off is material dependent. The relative dielectric permittivity and magnetic permeability for the Esorb-230 material in the pair-breaking frequency range of 75 to 110 GHz are measured, and the filter properties in this frequency range are calculated. The estimated dramatic suppression of the noise photon flux due to the filter proves its usefulness for experiments with superconducting quantum systems.
Abstract Josephson junctions, in appropriate configurations, can be excellent candidates for detection of single photons in the microwave frequency band. Such possibility has been recently addressed in the framework of galactic axion detection. Here are reported recent developments in the modelling and simulation of dynamic behaviour of a Josephson junction single microwave photon detector. For a Josephson junction to be enough sensitive, small critical currents and operating temperatures of the order of ten of mK are necessary. Thermal and quantum tunnelling out of the zero-voltage state can also mask the detection process. Axion detection would require dark count rates in the order of 0.001 Hz. It is, therefore, is of paramount importance to identify proper device fabrication parameters and junction operation point.
Abstract Development of large-scale quantum computing systems will require radio frequency (RF) and microwave technologies operating reliably at cryogenic temperatures down to tens of milli-Kelvin (mK). The quantum bits in the most promising quantum computing technologies such as the superconducting quantum computing are designed using principles of microwave engineering and operated using microwave signals. The control, readout, and coupling of qubits are implemented using a network of microwave components operating at various temperature stages. To ensure reliable operation of quantum computing systems, it is critical to ensure optimal performance of these microwave components and qubits at their respective operating temperatures, which can be as low as mK temperatures. It is, therefore, critical to understand the microwave characteristics of waveforms, components, circuits, networks, and systems at cryogenic temperatures. The UK’s National Physical Laboratory (NPL) is focussed on developing new microwave measurement capabilities through the UK’s National Quantum Technologies Programme to address various microwave test and measurement challenges in quantum computing. This includes the development of various measurement capabilities to characterize the microwave performance of quantum and microwave devices and substrate materials at cryogenic temperatures. This paper summarizes the roadmap of activities at NPL to address these microwave metrology challenges in quantum computing.