A quantum emitter coupled to a nanomechanical oscillator is a hybrid system where a macroscopic degree of freedom is coupled to a purely quantum system. Recent progress in nanotechnology has led to the realization of such devices by embedding single artificial atoms, such as quantum dots or superconducting qubits, into vibrating wires or membranes, opening up new perspectives for quantum information technologies and for the exploration of the quantum-classical boundary. In this paper, we show that the quantum emitter can be turned into a strikingly efficient light-controlled source of mechanical power by exploiting constructive interferences of classical phonon fields in the mechanical oscillator. We show that this mechanism can be exploited to carry out low-background nondestructive single-shot measurement of an optically active quantum bit state.
A quantum emitter coupled to a nanomechanical oscillator is a hybrid system where a macroscopic degree of freedom is coupled to a purely quantum system. Recent progress in nanotechnology has led to the realization of such devices by embedding single artificial atoms, such as quantum dots or superconducting qubits, into vibrating wires or membranes, opening up new perspectives for quantum information technologies and for the exploration of the quantum-classical boundary. In this paper, we show that the quantum emitter can be turned into a strikingly efficient light-controlled source of mechanical power by exploiting constructive interferences of classical phonon fields in the mechanical oscillator. We show that this mechanism can be exploited to carry out low-background nondestructive single-shot measurement of an optically active quantum bit state.
The coupling of nanomechanical resonators to controllable quantum systems represents a growing and promising area of research. Recent advances in this field have brought to astonishing results, such as the initialization of a mechanical resonator into its quantum ground state and even the preparation of non-classical coherent states of motion. These achievements open up appealing scenarios to quantum information technologies and to the exploration of the quantum-classical boundary. From an application perspective, such quantum-mechanical hybrid systems provide a versatile and attractive tool for a variety of precision measurements, like ultra-sensitive detection of force, mass, and displacement. \n \nQuantum control over a mechanical resonator, or, conversely, the prospect of using resonator's motion for probing quantum states, both involve some tight requirements. First of all, the interaction between the mechanics and its quantum partner has to be large on the scale of the decoherence rates of the coupled systems. In most cases, the coupling mechanism has to be activated by engineering the resonator with electrodes, magnets, or mirrors, or by using tailored laser fields. For this reason, the search for a strong coupling typically competes with the requirement of overcoming decoherence effects. In addition, for quantum effects to be observable, strong coupling has to be accompanied by the preparation of zero entropy initial states, for instance by cooling the resonator into its ground state of motion. \n \nThe motivation pursued by this thesis is to contribute to the inspiring field of hybrid systems by walking through each of the aforementioned directions. We in fact demonstrate a promising system in which optically active quantum dots, embedded in fully self-assembled core-shell nanowires, are coupled to the nanowire motion. Mechanical vibrations of the nanowire modulate the quantum dot emission energy over a broad range exceeding 14 meV, by means of deformation potential coupling. In our system, therefore, both the coupling mechanism and the quantum states themselves are intrinsic to the resonator's structure. Besides revealing unusually strong, such a built-in opto-mechanical interaction produces a hybrid system whose inherent coherence is unspoiled by any functionalization or external field and whose fabrication is simpler than top-down techniques. \n \nWe further demonstrate the use of a quantum point contact as a displacement transducer to measure and control the low-temperature thermal motion of a nearby micromechanical cantilever. We show that by including the QPC in a suitable feedback loop, we are able to cool the cantilever's fundamental mechanical mode down to the level of the measurement noise, achieving a squashing of the QPC noise at high gain. Due to its off-board design, our system is particularly versatile and suitable to force-sensing applications. Since the QPC transducer is sensitive to local modifications of the nearby electric field, our approach is in principle compatible with any nanoscale resonator, without requiring any functionalization to activate the coupling. By improving the performance of the QPC as a one-dimensional conductor and the cantilever-QPC capacitive coupling, our system has the potential to achieve quantum-limited displacement resolution and ground state cooling. We then report on some ongoing attempts to overcome the current limitations of our system and couple mechanical motion to different mesoscopic transport devices. \n \nWe remark that our demonstration of an as-grown quantum-dot-in-nanowire hybrid system opens up bright prospects on future experiments, as also testified by the very recent ferment of the scientific community around this topic. We find that the opto-mechanical coupling rate is not far from the nanowire mechanical frequency. This fact makes our system particularly promising for the quantum non-demolition readout of a quantum dot state through a measurement of the nanowire position. On the other hand, we show that the coupling can be further optimized, and the nanowire mechanical heating rate reduced, thus disclosing the captivating perspective of using quantum dots to probe and control the mechanical state of a nanowire. In this context, it would be important to investigate a possible spin-oscillator coupling in our system, given the long coherence time offered by a spin state in a quantum dot. The wide range of control over the quantum dots emission energy and the ability to tune two neighboring dots into resonance pave the way to mechanically induced emitter-emitter coupling. In addition, our monolithic opto-mechanical system constitutes a good candidate for recent proposals of a tripartite hybrid system, which would integrate an optical cavity, a quantum two-level system and a mechanical resonator. The intrinsically strong coupling between the quantum dots and the nanowire motion would enhance the interaction between the mechanics and the cavity field, leading for instance to efficient cooling of the resonator to the ground state. Finally, the quantum dot sensitivity to the nanowire resonant vibration could also support the use of our system as an integrated force probe or as a nanomechanical mass sensor. In other words, the results reported in this dissertation constitute not only a relevant proof-of-principle, moreover they open up intriguing challenges for future research.
Among the various nanoscale systems operating in the quantum limit, nanomechanical oscillators have emerged as particularly powerful platforms. They constitute highly sensitive sensors and can mediate interactions between light and localized quantum systems, playing a central role in various quantum information processing architectures. Due to their relatively large mass, they also serve as ideal platforms for investigating the transition between classical and quantum behavior. This thesis examines the dynamics of a nanomechanical oscillator coupled to a driven two-level system. The analysis focuses on the resolved sideband limit, where the twolevel system’s damping rate Γ is much smaller than the mechanical frequency ωm, and explores both the strong coupling (ωm ≫ g0 ≫ Γ) and ultra-strong coupling (g0 ∼ ωm ≫ Γ) regimes, where g0 denotes the coupling strength. These regimes enable coherent manipulation of the mechanical state while preserving its quantum coherence. Under blue-detuned driving of the two-level system and assuming low mechanical damping, the system exhibits a dynamical instability marked by the emergence of limit cycles in the mechanical oscillator. The onset of this regime is accompanied by pronounced fluctuations in the photon emission from the two-level system, indicated by a large deviation from Poissonian statistics. The phonon statistics display a similar behavior, offering an additional experimental signature. As the coupling strength approaches ωm, the mechanical oscillator reaches a steady state with non-classical feature. The phonon number distribution in this regime resembles that of Fock states, and the corresponding quasi-probability distribution in phase space displays negative regions, a signature of nonclassicality. A method is proposed to detect this non-classicality experimentally through measurements of the emitted light, from which the full quantum state of the coupled system can be reconstructed. The robustness of this approach is analyzed in the presence of realistic noise sources. The thesis further investigates the response of the system under two-tone driving. A tailored model is developed to describe this regime at strong coupling. When the driving frequencies are tuned to the first blue and red sidebands, the mechanical oscillator reaches a steady state exhibiting quadrature squeezing. In the case where both driving frequencies are red-detuned, the oscillator evolves into a superposition of coherent states, analogous to the behavior of a parametrically driven resonator. In both configurations, non-classical features become prominent when g0 approaches ωm. These results provide new insights into the generation and stabilization of non-classical and squeezed mechanical states. We outline feasible strategies for their detection, offering potential applications in hybrid quantum systems and foundational tests of quantum mechanics.
Nano- and micromechanical solid-state quantum devices have become a focus of attention. Reliably generating nonclassical states of their motion is of interest both for addressing fundamental questions about macroscopic quantum phenomena and for developing quantum technologies in the domains of sensing and transduction. We used quantum optical control techniques to conditionally generate single-phonon Fock states of a nanomechanical resonator. We performed a Hanbury Brown and Twiss-type experiment that verified the nonclassical nature of the phonon state without requiring full state reconstruction. Our result establishes purely optical quantum control of a mechanical oscillator at the single-phonon level.
Abstract Recent advances on optical control of mechanical motion in an optomechanical resonator have stimulated strong interests in exploring quantum behaviors of otherwise classical, macroscopic mechanical systems and especially in exploiting mechanical degrees of freedom for applications in quantum information processing. In an optomechanical resonator, an optically- active mechanical mode can couple to any of the optical resonances supported by the resonator via radiation pressure. This unique property leads to a remarkable phenomenon: mechanically-mediated conversion of optical fields between vastly different wavelengths. The resulting optomechanical interfaces can play a special role in a hybrid quantum network, enabling quantum communication between disparate quantum systems. In this review, we introduce the basic concepts of optomechanical interactions and discuss recent theoretical and experimental progresses in this field. A particular emphasis is on taking advantage of mechanical degrees of freedom, while avoiding detrimental effects of thermal mechanical motion.
In the past several years, the field of optomechanics has progressed from proof-of-principle experiments to the realization of mechanical oscillators and measurements in the quantum regime. Mechanical oscillators are of great interest because they can have small dissipation rates, can couple to many different systems of interest, and are the fundamental elements of ultrasensitive force detectors. Coupling these mechanical oscillators to microwave or optical fields provides a twofold advantage. Firstly, information about mechanical position can be encoded in the interrogating field, enabling sensitive readout of the mechanical oscillator. Secondly, the radiation pressure force of that field can be used to control the state of the mechanical oscillator. Including a high-quality microwave or optical cavity enhances both of these effects, as the field strength is resonantly increased.\nThe major questions in the field of optomechanics in the last several years have dealt with using mechanical oscillators for ultrasensitive measurements and as tools for quantum information. Both of these goals have the prerequisite that we be able to read out the motion of the mechanical oscillator in a quantum efficient manner. To that end, we developed a nearly shot-noise limited microwave interferometer capable of measuring mechanical motion with an imprecision below that at the standard quantum limit. This achievement is not only a critical improvement for the electromechanical experiments we do, but is also an important tool for any experiment that encodes the information of interest in microwave fields. In order to use mechanical oscillators as tools for quantum information, the mechanical oscillator must also be cooled into the quantum regime and fully controllable by the interrogating fields. To this end, we used the radiation pressure of microwave fields to cool our macroscopic mechanical oscillator to less than one phonon. We also demonstrated coherent transfer between itinerant microwave states and the mechanical oscillator, even for incident fields with less than one photon of energy.\nThese accomplishments have set the foundation for further experiments to extend the quantum information abilities of optomechanical systems, couple diverse quantum systems via a mechanical intermediary, and potentially explore the foundations of quantum mechanics at macroscopic scales.
Mechanical oscillators have been demonstrated with very high quality factors over a wide range of frequencies.They also couple to a wide variety of fields and forces, making them ideal as sensors.The realization of a mechanically based quantum bit could therefore provide an important new platform for quantum computation and sensing.Here, we show that by coupling one of the flexural modes of a suspended carbon nanotube to the charge states of a double quantum dot defined in the nanotube, it is possible to induce sufficient anharmonicity in the mechanical oscillator so that the coupled system can be used as a mechanical quantum bit.However, these results can only be achieved when the device enters the ultrastrong coupling regime.We discuss the conditions for the anharmonicity to appear, and we show that the Hamiltonian can be mapped onto an anharmonic oscillator, allowing us to work out the energy level structure and find how decoherence from the quantum dot and the mechanical oscillator is inherited by the qubit.Remarkably, the dephasing due to the quantum dot is expected to be reduced by several orders of magnitude in the coupled system.We outline qubit control, readout protocols, the realization of a CNOT gate by coupling two qubits to a microwave cavity, and finally how the qubit can be used as a static-force quantum sensor.