Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1304.1846 · New Journal of Physics

Trapping hot quasi-particles in a high-power superconducting electronic cooler

Hung Q. Nguyen, Thomas Aref, Ville J. Kauppila, M. Meschke, Clemens B. Winkelmann, H. Courtois, Jukka P Pekola

Published Aug 13, 2013• 49 citations
arXivHTMLPDF

Abstract

The performance of hybrid superconducting electronic coolers is usually limited by the accumulation of hot quasi-particles in their superconducting leads. This issue is all the more stringent in large-scale and high-power devices, as required by the applications. Introducing a metallic drain connected to the superconducting electrodes via a fine-tuned tunnel barrier, we efficiently remove quasi-particles and obtain electronic cooling from 300 mK down to 130 mK with a 400 pW cooling power. A simple thermal model accounts for the experimental observations.

DOI
10.1088/1367-2630/15/8/085013

Related papers

Superconducting cascade electron refrigerator

María Camarasa‐Gómez, Angelo Di Marco, F. W. J. Hekking +3 more

The design and operation of an electronic cooler based on a combination of superconducting tunnel junctions is described. The cascade extraction of hot-quasiparticles, which stems from the energy gaps of two different superconductors, allows for a normal metal to be cooled down to about 100 mK starting from a bath temperature of 0.5 K. We discuss the practical implementation, potential performance, and limitations of such a device.

arXiv:1404.4701•Applied Physics Letters•May 12, 2014•23 citations

Sub-50-mK Electronic Cooling with Large-Area Superconducting Tunnel Junctions

Hung Q. Nguyen, M. Meschke, H. Courtois +1 more

Experiments conducted below 0.1 K require expensive, complicated cryogenic apparatus. What if an integrated solid-state device could be used instead? The authors present just such an on-chip refrigerator, based on a superconductor/normal-metal junction, that chills down to 30 mK with remarkable cooling power. This provides a means to reduce thermal noise in e.g. qubits, SQUIPT magnetometers, or the sensitive detectors required for astronomy experiments.

Physical Review Applied•Nov 4, 2014•75 citations

Efficiency of electron cooling in cold-electron bolometers with traps

Dmitry A. Pimanov, Vladimir A Frost, Anton V Blagodatkin +3 more

Electron on-chip cooling from the base temperature of 300 mK is very important for highly sensitive detectors operating in space due to problems of dilution fridges at low gravity. Electron cooling is also important for ground-based telescopes equipped with 3He cryostats, being able to function at any operating angle. This work is aimed at investigation of electron cooling in the low temperature range. New samples of cold-electron bolometers with traps and hybrid superconducting/ferromagnetic absorbers have shown a temperature reduction of the electrons in the refrigerator junctions from 300 to 82 mK, from 200 to 33 mK and from 100 to 25 mK in the idle regime without optical power load. The electron temperature was determined by solving heat balance equations with account of the leakage current, sixth power of temperature in the whole temperature range, and the Andreev current using numerical methods and automatic fitting algorithm.

Beilstein Journal of Nanotechnology•Sep 7, 2022•10 citations

Engineering Physics of Superconducting Hot-Electron Bolometer Mixers

T. M. Klapwijk, A. V. Semenov

Superconducting hot-electron bolometers are presently the best performing mixing devices for the frequency range beyond 1.2 THz, where good-quality superconductor-insulator-superconductor devices do not exist. Their physical appearance is very simple: an antenna consisting of a normal metal, sometimes a normal-metal-superconductor bilayer, connected to a thin film of a narrow short superconductor with a high resistivity in the normal state. The device is brought into an optimal operating regime by applying a dc current and a certain amount of local-oscillator power. Despite this technological simplicity, its operation has found to be controlled by many different aspects of superconductivity, all occurring simultaneously. A core ingredient is the understanding that there are two sources of resistance in a superconductor: a charge-conversion resistance occurring at a normal-metal-superconductor interface and a resistance due to time-dependent changes of the superconducting phase. The latter is responsible for the actual mixing process in a nonuniform superconducting environment set up by the bias conditions and the geometry. The present understanding indicates that further improvement needs to be found in the use of other materials with a faster energy relaxation rate. Meanwhile, several empirical parameters have become physically meaningful indicators of the devices, which will facilitate the technological developments.

arXiv:1710.09136•IEEE Transactions on Terahertz Science and Technology•Nov 1, 2017•36 citations

Quantum-Circuit Refrigeration for Superconducting Devices

Matti Partanen, Kuan Yen Tan, Shumpei Masuda +6 more

Superconducting microwave circuits are promising candidates for a variety of different applications, ranging from extremely sensitive photon detectors to large-scale quantum computer. Thus, they may revolutionize our everyday lives in the future through substantial technological development. Superconducting quantum circuits typically operate at low power levels and consist of linear and nonlinear resonators. In order to enhance their operation fidelity, they need to be cooled efficiently, and the dissipation of the circuit needs to be well engineered. In this chapter, we describe a refrigerator for electric quantum circuits based on photon-assisted electron tunneling in hybrid superconductor–insulator–normal-metal junctions. Furthermore, such junctions can also serve as incoherent microwave sources. Importantly, the photon absorption and emission rates can be tuned over several orders of magnitude. In addition, these junctions are used for refrigeration and heating of the normal-metal electrons as well as for probing the electron temperature. Here, we present their operation principle and provide insight to their potential applications as well as briefly describe fabrication methods.

CRC Press eBooks•Apr 22, 2020•0 citations

HTS Quasi-Particle Injection Devices for Interfaces between SFQ and CMOS Circuits.

H. Shiga, Yoichi Okabe

We have fabricated a prototype of interface devices between SFQ and CMOS circuits using HTS quasi-particle injection devices. By the injection of quasi-particles, the bridge area becomes resistive and high voltage appears at the drain electrode. As a test of device operation, we applied the signal of a function generator to the gate electrode and observed that the device successfully repeated on/off operation. We also succeeded in explaining the device characteristics by considering the thermal effects.

IEICE Transactions on Electronics•Mar 1, 2002•0 citations
The performance of hybrid superconducting electronic coolers is usually limited by the accumulation of hot quasi-particles in their superconducting leads. This issue is all the more stringent in large-scale and high-power devices, as required by the applications. Introducing a metallic drain connected to the superconducting electrodes via a fine-tuned tunnel barrier, we efficiently remove quasi-particles and obtain electronic cooling from 300 mK down to 130 mK with a 400 pW cooling power. A simple thermal model accounts for the experimental observations.
Electron on-chip cooling from the base temperature of 300 mK is very important for highly sensitive detectors operating in space due to problems of dilution fridges at low gravity. Electron cooling is also important for ground-based telescopes equipped with 3He cryostats, being able to function at any operating angle. This work is aimed at investigation of electron cooling in the low temperature range. New samples of cold-electron bolometers with traps and hybrid superconducting/ferromagnetic absorbers have shown a temperature reduction of the electrons in the refrigerator junctions from 300 to 82 mK, from 200 to 33 mK and from 100 to 25 mK in the idle regime without optical power load. The electron temperature was determined by solving heat balance equations with account of the leakage current, sixth power of temperature in the whole temperature range, and the Andreev current using numerical methods and automatic fitting algorithm.
Superconducting hot-electron bolometers are presently the best performing mixing devices for the frequency range beyond 1.2 THz, where good-quality superconductor-insulator-superconductor devices do not exist. Their physical appearance is very simple: an antenna consisting of a normal metal, sometimes a normal-metal-superconductor bilayer, connected to a thin film of a narrow short superconductor with a high resistivity in the normal state. The device is brought into an optimal operating regime by applying a dc current and a certain amount of local-oscillator power. Despite this technological simplicity, its operation has found to be controlled by many different aspects of superconductivity, all occurring simultaneously. A core ingredient is the understanding that there are two sources of resistance in a superconductor: a charge-conversion resistance occurring at a normal-metal-superconductor interface and a resistance due to time-dependent changes of the superconducting phase. The latter is responsible for the actual mixing process in a nonuniform superconducting environment set up by the bias conditions and the geometry. The present understanding indicates that further improvement needs to be found in the use of other materials with a faster energy relaxation rate. Meanwhile, several empirical parameters have become physically meaningful indicators of the devices, which will facilitate the technological developments.
Superconducting microwave circuits are promising candidates for a variety of different applications, ranging from extremely sensitive photon detectors to large-scale quantum computer. Thus, they may revolutionize our everyday lives in the future through substantial technological development. Superconducting quantum circuits typically operate at low power levels and consist of linear and nonlinear resonators. In order to enhance their operation fidelity, they need to be cooled efficiently, and the dissipation of the circuit needs to be well engineered. In this chapter, we describe a refrigerator for electric quantum circuits based on photon-assisted electron tunneling in hybrid superconductor–insulator–normal-metal junctions. Furthermore, such junctions can also serve as incoherent microwave sources. Importantly, the photon absorption and emission rates can be tuned over several orders of magnitude. In addition, these junctions are used for refrigeration and heating of the normal-metal electrons as well as for probing the electron temperature. Here, we present their operation principle and provide insight to their potential applications as well as briefly describe fabrication methods.
We have fabricated a prototype of interface devices between SFQ and CMOS circuits using HTS quasi-particle injection devices. By the injection of quasi-particles, the bridge area becomes resistive and high voltage appears at the drain electrode. As a test of device operation, we applied the signal of a function generator to the gate electrode and observed that the device successfully repeated on/off operation. We also succeeded in explaining the device characteristics by considering the thermal effects.