Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1301.2113 · Physical Review Letters

Static Trapping of Polar Molecules in a Traveling Wave Decelerator

Marina Quintero‐Pérez, Paul Jansen, Thomas E. Wall, Joost E. van den Berg, Steven Hoekstra, Hendrick L. Bethlem

Published Mar 27, 2013• 56 citations
arXivHTMLPDF

Abstract

We present experiments on decelerating and trapping ammonia molecules using a combination of a Stark decelerator and a traveling wave decelerator. In the traveling wave decelerator, a moving potential is created by a series of ring-shaped electrodes to which oscillating high voltages (HV) are applied. By lowering the frequency of the applied voltages, the molecules confined in the moving trap are decelerated and brought to a standstill. As the molecules are confined in a true 3D well, this kind of deceleration has practically no losses, resulting in a great improvement on the usual Stark deceleration techniques. The necessary voltages are generated by amplifying the output of an arbitrary wave generator using fast HV amplifiers, giving us great control over the trapped molecules. We illustrate this by experiments in which we adiabatically cool trapped NH3 and ND3 molecules and resonantly excite their motion.

DOI
10.1103/physrevlett.110.133003

Related papers

Deceleration and trapping of ammonia molecules in a traveling-wave decelerator

Paul Jansen, Marina Quintero‐Pérez, Thomas E. Wall +3 more

We have recently demonstrated static trapping of ammonia isotopologues in a decelerator that consists of a series of ring-shaped electrodes to which oscillating high voltages are applied [Quintero-P\'erez et al., Phys. Rev. Lett. 110, 133003 (2013)]. In this paper we provide further details about this traveling-wave decelerator and present new experimental data that illustrate the control over molecules that it offers. We analyze the performance of our setup under different deceleration conditions and demonstrate phase-space manipulation of the trapped molecular sample.

arXiv:1306.0397•Physical Review A•Oct 21, 2013•23 citations

Pulsed operation of a ring Stark decelerator

Yomay Shyur, Jason A. Bossert, Heather J. Lewandowski

Abstract Stark deceleration is a technique that uses time-varying inhomogeneous electric fields to decelerate polar molecules for various molecular beam and trapping experiments. New ring-geometry Stark decelerators with continuously varying voltages offer a method to produce a more intense source of molecules than in the more typically used crossed-pin geometry Stark decelerators. However, this new technique, traveling-wave Stark deceleration, is more experimentally challenging due to the electronic requirements. A third method, pulsed-ring Stark deceleration, uses ring-geometry electrodes with high-voltage pulses to decelerate molecules. The discrete voltages make it easier to implement, and it is more efficient in certain situations due to an increased longitudinal potential gradient. Here, we present an experimental realization of a ring-geometry Stark decelerator using both continuously varying and discrete voltages. Using the pulsed-ring method, we demonstrate a newly accessible low-velocity regime for moderate peak voltages on ring electrodes. This opens up the opportunity to efficiently decelerate various molecular species using a medium length decelerator. A comparison of experimental and simulated results between traveling-wave and pulsed-ring Stark deceleration is presented along with a simple model for determining when each mode is more efficient.

Journal of Physics B Atomic Molecular and Optical Physics•Jul 6, 2018•16 citations

Stark Deceleration Methods for Cold Molecule Experiments

Yomay Shyur

The growing field of cold molecule physics has demonstrated many methods of quantum control for precision measurement and molecular interaction studies. One particular method is Stark deceleration, which uses electric field gradients to produce packets of slow polar molecules. Since Stark deceleration does not increase phase-space density, the efficiency of the deceleration process is critical in determining the final cold molecule density. This dissertation describes three different Stark deceleration techniques. The first type of deceleration is pulsed-pin deceleration. We use this technique to produce slow OH molecules that can be trapped for cold collision studies. A two photon state-selective detection system, which includes a 118 nm photon, is used to determine the density distribution of OH in the trap. We explore the advantages and limitations to creating 118 nm light. The second and third types of Stark deceleration are pulsed-ring and traveling-wave methods of running a ring-geometry decelerator. Ring-geometry decelerators present improved deceleration efficiencies due to the cylindrical symmetry of the electrodes and true three-dimensional confinement. The pulsed-ring mode of the ring decelerator uses commercial high-voltage switches to apply discrete pulses to the ring electrodes. The continuous operation mode of the ring decelerator uses varying sine-wave voltages to create a traveling Stark potential well and has proven to be incredibly challenging due to the analog high voltage requirements of the system. In order to bring ND3 seeded in krypton (∼415 m/s) down to rest in the laboratory, sine wave voltages with amplitudes up to ±10 kV, currents up to 500 mA, and a bandwidth of 30 kHz down to DC are required. We describe a high-voltage amplifier that can be used for traveling-wave deceleration. The traveling-wave Stark deceleration mode is then compared to the pulsed-ring Stark deceleration mode and cases where one mode is superior to another are discussed.

•Jan 1, 2018•1 citation

Velocity-tunable beam of continuously decelerated polar molecules for cold ion-molecule reaction studies

J. M. Greenberg, Olivia A. Krohn, Jason A. Bossert +4 more

Producing high densities of molecules is a fundamental challenge for low-temperature, ion-molecule reaction studies. Traveling-wave Stark decelerators promise to deliver high density beams of cold, polar molecules but require non-trivial control of high-voltage potentials. We have overcome this experimental challenge and demonstrate continuous deceleration of ND3 from 385 to 10 m/s, while driving the decelerator electrodes with a 10 kV amplitude sinewave. In addition, we test an alternative slowing scheme, which increases the time delay between decelerated packets of ND3 and non-decelerated molecules, allowing for better energy resolution of subsequent reaction studies. We characterize this source of neutral, polar molecules suitable for energy-resolved reaction studies with trapped ions at cold translational temperatures. We also propose a combined apparatus consisting of the traveling-wave decelerator and a linear ion trap with a time-of-flight mass spectrometer and discuss to what extent it may achieve cold, energy-resolved, ion-neutral reactions.

Review of Scientific Instruments•Oct 1, 2021•6 citations

Pulsed versus continuous wave operation of a ring Stark decelerator

Yomay Shyur, Jason A. Bossert, Heather J. Lewandowski

Stark deceleration is a technique that uses time-varying inhomogeneous electric fields to decelerate polar molecules for various molecular beam and trapping experiments. New ring-geometry Stark decelerators with continuously varying voltages offer a method to produce a more intense source of molecules in a technique called traveling-wave Stark deceleration. However, this type of deceleration is more experimentally challenging than the more typically used crossed-pin geometry decelerators with pulsed voltages. Here, we present an experimental realization of a ring-geometry Stark decelerator using either continuously varying or discrete voltages. Pulsed-ring Stark deceleration using discrete voltages is easier to implement and, under certain circumstances, is more efficient than traveling-wave Stark deceleration. A comparison of experimental and simulated results between traveling-wave and pulsed-ring Stark deceleration is presented along with a simple model for determining when each mode is more efficient.

arXiv:1712.07044•Dec 19, 2017•0 citations

Deceleration and Trapping of SrF Molecules

Parul Aggarwal, Y. Yin, Kevin Esajas +12 more

We report on the electrostatic trapping of neutral SrF molecules. The molecules are captured from a cryogenic buffer-gas beam source into the moving traps of a 4.5-m-long traveling-wave Stark decelerator. The SrF molecules in X^{2}Σ^{+}(v=0,N=1) state are brought to rest as the velocity of the moving traps is gradually reduced from 190 m/s to zero. The molecules are held for up to 50 ms in multiple electric traps of the decelerator. The trapped packets have a volume (FWHM) of 1 mm^{3} and a velocity spread of 5(1) m/s, which corresponds to a temperature of 60(20) mK. Our result demonstrates a factor 3 increase in the molecular mass that has been Stark decelerated and trapped. Heavy molecules (mass>100 amu) offer a highly increased sensitivity to probe physics beyond the standard model. This work significantly extends the species of neutral molecules of which slow beams can be created for collision studies, precision measurement, and trapping experiments.

arXiv:2103.07968•Physical Review Letters•Oct 21, 2021•30 citations
We present experiments on decelerating and trapping ammonia molecules using a combination of a Stark decelerator and a traveling wave decelerator. In the traveling wave decelerator, a moving potential is created by a series of ring-shaped electrodes to which oscillating high voltages (HV) are applied. By lowering the frequency of the applied voltages, the molecules confined in the moving trap are decelerated and brought to a standstill. As the molecules are confined in a true 3D well, this kind of deceleration has practically no losses, resulting in a great improvement on the usual Stark deceleration techniques. The necessary voltages are generated by amplifying the output of an arbitrary wave generator using fast HV amplifiers, giving us great control over the trapped molecules. We illustrate this by experiments in which we adiabatically cool trapped NH3 and ND3 molecules and resonantly excite their motion.
We have recently demonstrated static trapping of ammonia isotopologues in a decelerator that consists of a series of ring-shaped electrodes to which oscillating high voltages are applied [Quintero-P\'erez et al., Phys. Rev. Lett. 110, 133003 (2013)]. In this paper we provide further details about this traveling-wave decelerator and present new experimental data that illustrate the control over molecules that it offers. We analyze the performance of our setup under different deceleration conditions and demonstrate phase-space manipulation of the trapped molecular sample.
Abstract Stark deceleration is a technique that uses time-varying inhomogeneous electric fields to decelerate polar molecules for various molecular beam and trapping experiments. New ring-geometry Stark decelerators with continuously varying voltages offer a method to produce a more intense source of molecules than in the more typically used crossed-pin geometry Stark decelerators. However, this new technique, traveling-wave Stark deceleration, is more experimentally challenging due to the electronic requirements. A third method, pulsed-ring Stark deceleration, uses ring-geometry electrodes with high-voltage pulses to decelerate molecules. The discrete voltages make it easier to implement, and it is more efficient in certain situations due to an increased longitudinal potential gradient. Here, we present an experimental realization of a ring-geometry Stark decelerator using both continuously varying and discrete voltages. Using the pulsed-ring method, we demonstrate a newly accessible low-velocity regime for moderate peak voltages on ring electrodes. This opens up the opportunity to efficiently decelerate various molecular species using a medium length decelerator. A comparison of experimental and simulated results between traveling-wave and pulsed-ring Stark deceleration is presented along with a simple model for determining when each mode is more efficient.
The growing field of cold molecule physics has demonstrated many methods of quantum control for precision measurement and molecular interaction studies. One particular method is Stark deceleration, which uses electric field gradients to produce packets of slow polar molecules. Since Stark deceleration does not increase phase-space density, the efficiency of the deceleration process is critical in determining the final cold molecule density. This dissertation describes three different Stark deceleration techniques. The first type of deceleration is pulsed-pin deceleration. We use this technique to produce slow OH molecules that can be trapped for cold collision studies. A two photon state-selective detection system, which includes a 118 nm photon, is used to determine the density distribution of OH in the trap. We explore the advantages and limitations to creating 118 nm light. The second and third types of Stark deceleration are pulsed-ring and traveling-wave methods of running a ring-geometry decelerator. Ring-geometry decelerators present improved deceleration efficiencies due to the cylindrical symmetry of the electrodes and true three-dimensional confinement. The pulsed-ring mode of the ring decelerator uses commercial high-voltage switches to apply discrete pulses to the ring electrodes. The continuous operation mode of the ring decelerator uses varying sine-wave voltages to create a traveling Stark potential well and has proven to be incredibly challenging due to the analog high voltage requirements of the system. In order to bring ND3 seeded in krypton (∼415 m/s) down to rest in the laboratory, sine wave voltages with amplitudes up to ±10 kV, currents up to 500 mA, and a bandwidth of 30 kHz down to DC are required. We describe a high-voltage amplifier that can be used for traveling-wave deceleration. The traveling-wave Stark deceleration mode is then compared to the pulsed-ring Stark deceleration mode and cases where one mode is superior to another are discussed.
Producing high densities of molecules is a fundamental challenge for low-temperature, ion-molecule reaction studies. Traveling-wave Stark decelerators promise to deliver high density beams of cold, polar molecules but require non-trivial control of high-voltage potentials. We have overcome this experimental challenge and demonstrate continuous deceleration of ND3 from 385 to 10 m/s, while driving the decelerator electrodes with a 10 kV amplitude sinewave. In addition, we test an alternative slowing scheme, which increases the time delay between decelerated packets of ND3 and non-decelerated molecules, allowing for better energy resolution of subsequent reaction studies. We characterize this source of neutral, polar molecules suitable for energy-resolved reaction studies with trapped ions at cold translational temperatures. We also propose a combined apparatus consisting of the traveling-wave decelerator and a linear ion trap with a time-of-flight mass spectrometer and discuss to what extent it may achieve cold, energy-resolved, ion-neutral reactions.
Stark deceleration is a technique that uses time-varying inhomogeneous electric fields to decelerate polar molecules for various molecular beam and trapping experiments. New ring-geometry Stark decelerators with continuously varying voltages offer a method to produce a more intense source of molecules in a technique called traveling-wave Stark deceleration. However, this type of deceleration is more experimentally challenging than the more typically used crossed-pin geometry decelerators with pulsed voltages. Here, we present an experimental realization of a ring-geometry Stark decelerator using either continuously varying or discrete voltages. Pulsed-ring Stark deceleration using discrete voltages is easier to implement and, under certain circumstances, is more efficient than traveling-wave Stark deceleration. A comparison of experimental and simulated results between traveling-wave and pulsed-ring Stark deceleration is presented along with a simple model for determining when each mode is more efficient.
We report on the electrostatic trapping of neutral SrF molecules. The molecules are captured from a cryogenic buffer-gas beam source into the moving traps of a 4.5-m-long traveling-wave Stark decelerator. The SrF molecules in X^{2}Σ^{+}(v=0,N=1) state are brought to rest as the velocity of the moving traps is gradually reduced from 190 m/s to zero. The molecules are held for up to 50 ms in multiple electric traps of the decelerator. The trapped packets have a volume (FWHM) of 1 mm^{3} and a velocity spread of 5(1) m/s, which corresponds to a temperature of 60(20) mK. Our result demonstrates a factor 3 increase in the molecular mass that has been Stark decelerated and trapped. Heavy molecules (mass>100 amu) offer a highly increased sensitivity to probe physics beyond the standard model. This work significantly extends the species of neutral molecules of which slow beams can be created for collision studies, precision measurement, and trapping experiments.