Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1210.0044 · Physical Review A

Influence of monolayer contamination on electric-field-noise heating in ion traps

Arghavan Safavi-Naini, E. Kim, Philippe F. Weck, Peter Rabl, H. R. Sadeghpour

Published Feb 22, 2013• 33 citations
arXivHTMLPDF

Abstract

Electric field noise is a hinderance to the assembly of large-scale quantum computers based on entangled trapped ions. Apart from ubiquitous technical noise, experimental studies of trapped ion heating have revealed additional limiting contributions to this noise, originating from atomic processes on the electrode surfaces. In a recent work [Safavi-Naini, Rabl, Weck, and Sadeghpour, Phys. Rev. A 84, 023412 (2011)] we described a microscopic model for this excess electric field noise, which points a way towards a more systematic understanding of surface adsorbates as progenitors of electric field jitter noise. Here, we address the impact of surface monolayer contamination on adsorbate-induced noise processes. Using exact numerical calculations for H and N atomic monolayers on a Au(111) surface, representing opposite extremes of physisorption and chemisorption, we show that an additional monolayer can significantly affect the noise power spectrum and, respectively, enhance and suppress the heating rates.

DOI
10.1103/physreva.87.023421

Related papers

Microscopic model of electric-field-noise heating in ion traps

Arghavan Safavi-Naini, Peter Rabl, Philippe F. Weck +1 more

Motional heating of ions in microfabricated traps is one of the open challenges hindering experimental realizations of large-scale quantum processing devices. Recently, a series of measurements of the heating rates in surface-electrode ion traps characterized their frequency, distance, and temperature dependencies, but our understanding of the microscopic origin of this noise remains incomplete. In this work we develop a theoretical model for the electric field noise which is associated with a random distribution of adsorbed atoms on the trap electrode surface. By using first-principles calculations of the fluctuating dipole moments of the adsorbed atoms we evaluate the distance, frequency, and temperature dependence of the resulting electric field fluctuation spectrum. Our theory reproduces correctly the ${d}^{\ensuremath{-}4}$ dependence with distance of the ion from the electrode surface and calculates the noise spectrum beyond the standard scenario of two-level fluctuators by incorporating all the relevant vibrational states. Our model predicts a regime of $1/f$ noise which commences at roughly the frequency of the fundamental phonon transition rate and a thermally activated noise spectrum which for higher temperatures exhibits a crossover as a function of frequency.

arXiv:1106.1949•Physical Review A•Aug 22, 2011•91 citations

1/ω electric-field noise in surface ion traps from correlated adsorbate dynamics

Benjamin L. Foulon, Keith G. Ray, Chang-Eun Kim +3 more

Ion traps are promising architectures for implementing quantum computers, but they suffer from excessive ``anomalous'' ion motional heating that limit their overall coherence and practicality for scalable quantum computing. The exact microscopic origins of anomalous heating remain an open question, but experiments point to adsorbates on trap electrodes as one likely source. Many different models of anomalous heating have been proposed, but these models have yet to pinpoint the atomistic origin of the experimentally observed $1/\ensuremath{\omega}$ electric-field noise scaling seen in ion traps at frequencies between 0.1--10 MHz. In this work, we show that a model based on previously proposed surface-induced dipole fluctuations on adsorbates, but which also incorporates interparticle interaction dynamics through molecular dynamics simulations of up to multiple monolayers of adsorbates, gives rise to $1/\ensuremath{\omega}$ frequency scaling at the MHz frequencies typically employed in ion traps. These results demonstrate that moderate-to-high densities of adsorbates can give rise to a set of activated motions that produce the $1/\ensuremath{\omega}$ noise observed in ion traps and that collective adsorbate motions produce the observed noise spectra that a noninteracting model does not capture.

Physical Review A•Jan 19, 2022•8 citations

van der Waals-corrected density functional study of electric field noise heating in ion traps caused by electrode surface adsorbates

Keith G. Ray, Brenda M Rubenstein, Wenze Gu +1 more

Abstract In order to realize the full potential of ion trap quantum computers, an improved understanding is required of the motional heating that trapped ions experience. Experimental studies of the temperature-, frequency-, and ion–electrode distance-dependence of the electric field noise responsible for motional heating, as well as the noise before and after ion bombardment cleaning of trap electrodes, suggest that fluctuations of adsorbate dipoles are a likely source of so-called ‘anomalous heating,’ or motional heating of the trapped ions at a rate much higher than the Johnson noise limit. Previous computational studies have investigated how the fluctuation of model adsorbate dipoles affects anomalous heating. However, the way in which specific adsorbates affect the electric field noise has not yet been examined, and an electric dipole model employed in previous studies is only accurate for a small subset of possible adsorbates. Here, we analyze the behavior of both in-plane and out-of-plane vibrational modes of twenty-one adsorbate–electrode combinations within the independent fluctuating dipole model, utilizing accurate first principles computational methods to determine the surface-induced dipole moments. We find the chemical specificity of the adsorbate can change the electric field noise by seven orders of magnitude and specifically that soft in-plane modes of weakly-adsorbed hydrocarbons produce the greatest noise and ion heating. We discuss the dynamics captured by the fluctuating dipole model, namely the adsorbate-dependent turn-on temperature and electric field noise magnitude, and also discuss the model’s failure to reproduce the measured 1/ω noise frequency scaling with a single adsorbate species. We suggest future research directions for improved, quantitatively predictive models based on extensions of the present framework to multiple interacting adsorbates.

arXiv:1810.10199•New Journal of Physics•Apr 11, 2019•10 citations

100-Fold Reduction of Electric-Field Noise in an Ion Trap Cleaned with In Situ Argon-Ion-Beam Bombardment

Dustin A. Hite, Yves Colombe, A. C. Wilson +8 more

Motional heating of trapped atomic ions is a major obstacle to their use as quantum bits in a scalable quantum computer. The detailed physical origin of this heating is not well understood, but experimental evidence suggests that it is caused by electric-field noise emanating from the surface of the trap electrodes. In this study, we have investigated the role of adsorbates on the electrodes by identifying contaminant overlayers, implementing an in situ argon-ion-beam cleaning treatment, and measuring ion heating rates before and after treating the trap electrodes' surfaces. We find a 100-fold reduction in heating rate after treatment. The experiments described here are sensitive to low levels of electric-field noise in the MHz frequency range. Therefore, this approach could become a useful tool in surface science that complements established techniques.

arXiv:1112.5419•Physical Review Letters•Sep 4, 2012•175 citations

How Correlated Adsorbate Dynamics on Realistic Substrates Can Give Rise to 1/ω Electric-Field Noise in Surface Ion Traps

Benjamin L. Foulon, Keith G. Ray, Chang-Eun Kim +3 more

Ion traps are promising architectures for implementing scalable quantum computing, but they suffer from excessive "anomalous" heating that prevents their full potential from being realized. This heating, which is orders of magnitude larger than that expected from Johnson-Nyquist noise, results in ion motion that leads to decoherence and reduced fidelity in quantum logic gates. The exact origin of anomalous heating is an open question, but experiments point to adsorbates on trap electrodes as a likely source. Many different models of anomalous heating have been proposed, but these models have yet to pinpoint the atomistic origin of the experimentally-observed $1/ω$ electric field noise scaling observed in ion traps at frequencies between 0.1-10 MHz. In this work, we perform the first computational study of the ion trap electric field noise produced by the motions of multiple monolayers of adsorbates described by first principles potentials. In so doing, we show that correlated adsorbate motions play a definitive role in producing $1/ω$ noise and identify candidate collective adsorbate motions, including translational and rotational motions of adsorbate patches and multilayer exchanges, that give rise to $1/ω$ scaling at the MHz frequencies typically employed in ion traps. These results demonstrate that multi-adsorbate systems, even simple ones, can give rise to a set of activated motions that can produce the $1/ω$ noise observed in ion traps and that collective, rather than individual, adsorbate motions are much more likely to give rise to low-frequency heating.

arXiv:2107.01177•Jul 2, 2021•0 citations

Probing Electric Field Noise Above Ion Traps from 7–600 K and the Influence of Surface Structure on Noise Levels

Benjamin Saarel

Electric field noise produced by the surface of ion trap electrodes reduces the fidelity of quantum computing operations. Despite decades of investigation its microscopic origins remain unclear.This thesis investigates the origins of surface electric field noise by examining its dependence on trap temperature. A set of Al-Cu surface Paul traps are fabricated together and sent to MIT Lincoln Labs (MITLL) and the University of California, Berkeley (UCB). MITLL measures noise from 7 K to room temperature above a first trap and UCB measures noise from room temperature to 590 K above a second trap. The noise measurements from the two experiments are combined to study the noise dependence over the full temperature range from 7-590 K. This is the largest temperature range ever studied using a single trap design and connects the temperature ranges used in all previous studies.We find qualitatively different behaviors at low and high temperatures: from 7-430 K we find that the noise follows the same power-law scaling reported in previous cryogenic studies. At temperatures from 430-590 K, we find that the noise increases much more rapidly than predicted by the power-law scaling. We note a particularly sharp rise in noise at 560 K, which is similar to the sharp rise in noise reported in a previous high-temperature study of a different Al-Cu trap. To determine which physical processes are associated with the change in noise at elevated trap temperatures, we investigate how the material state of the trap electrodes changes when they are heated. We find that the primary physical process associated with the change in noise at high temperature is thermally-activated atom diffusion within the films.This thesis also investigates if the surface structure of room-temperature Au ion traps affects noise levels. We use a heat treatment to restructure the surface of the traps and measure the resulting change in noise. We find that the heat treatment leads to significant changes to the surface structure but causes only a modest change to noise levels. This indicates that the heat-induced changes to the surface do not strongly affect noise. We also note that the noise magnitude observed above these Au traps is state-of-the-art for room-temperature, untreated surface ion traps. This noise level can be explained by modeling the contamination that exists on the trap surface as a dielectric with a loss tangent of tan θ ≈ 0.01.Finally, this thesis investigates the origin of elevated noise levels in one region of a Au surface ion trap. We find that micron-sized particles are located where noise levels are highest, indicating that these particles are likely responsible for the noise. We can explain the magnitude, frequency, and distance dependence of the noise if we treat the particles as a lossy dielectric with a loss tangent tan θ ≈ 0.3.

•May 1, 2026•0 citations
Electric field noise is a hinderance to the assembly of large-scale quantum computers based on entangled trapped ions. Apart from ubiquitous technical noise, experimental studies of trapped ion heating have revealed additional limiting contributions to this noise, originating from atomic processes on the electrode surfaces. In a recent work [Safavi-Naini, Rabl, Weck, and Sadeghpour, Phys. Rev. A 84, 023412 (2011)] we described a microscopic model for this excess electric field noise, which points a way towards a more systematic understanding of surface adsorbates as progenitors of electric field jitter noise. Here, we address the impact of surface monolayer contamination on adsorbate-induced noise processes. Using exact numerical calculations for H and N atomic monolayers on a Au(111) surface, representing opposite extremes of physisorption and chemisorption, we show that an additional monolayer can significantly affect the noise power spectrum and, respectively, enhance and suppress the heating rates.
Motional heating of ions in microfabricated traps is one of the open challenges hindering experimental realizations of large-scale quantum processing devices. Recently, a series of measurements of the heating rates in surface-electrode ion traps characterized their frequency, distance, and temperature dependencies, but our understanding of the microscopic origin of this noise remains incomplete. In this work we develop a theoretical model for the electric field noise which is associated with a random distribution of adsorbed atoms on the trap electrode surface. By using first-principles calculations of the fluctuating dipole moments of the adsorbed atoms we evaluate the distance, frequency, and temperature dependence of the resulting electric field fluctuation spectrum. Our theory reproduces correctly the ${d}^{\ensuremath{-}4}$ dependence with distance of the ion from the electrode surface and calculates the noise spectrum beyond the standard scenario of two-level fluctuators by incorporating all the relevant vibrational states. Our model predicts a regime of 1/f1/f1/f noise which commences at roughly the frequency of the fundamental phonon transition rate and a thermally activated noise spectrum which for higher temperatures exhibits a crossover as a function of frequency.
Ion traps are promising architectures for implementing quantum computers, but they suffer from excessive ``anomalous'' ion motional heating that limit their overall coherence and practicality for scalable quantum computing. The exact microscopic origins of anomalous heating remain an open question, but experiments point to adsorbates on trap electrodes as one likely source. Many different models of anomalous heating have been proposed, but these models have yet to pinpoint the atomistic origin of the experimentally observed $1/\ensuremath{\omega}$ electric-field noise scaling seen in ion traps at frequencies between 0.1--10 MHz. In this work, we show that a model based on previously proposed surface-induced dipole fluctuations on adsorbates, but which also incorporates interparticle interaction dynamics through molecular dynamics simulations of up to multiple monolayers of adsorbates, gives rise to $1/\ensuremath{\omega}$ frequency scaling at the MHz frequencies typically employed in ion traps. These results demonstrate that moderate-to-high densities of adsorbates can give rise to a set of activated motions that produce the $1/\ensuremath{\omega}$ noise observed in ion traps and that collective adsorbate motions produce the observed noise spectra that a noninteracting model does not capture.
Abstract In order to realize the full potential of ion trap quantum computers, an improved understanding is required of the motional heating that trapped ions experience. Experimental studies of the temperature-, frequency-, and ion–electrode distance-dependence of the electric field noise responsible for motional heating, as well as the noise before and after ion bombardment cleaning of trap electrodes, suggest that fluctuations of adsorbate dipoles are a likely source of so-called ‘anomalous heating,’ or motional heating of the trapped ions at a rate much higher than the Johnson noise limit. Previous computational studies have investigated how the fluctuation of model adsorbate dipoles affects anomalous heating. However, the way in which specific adsorbates affect the electric field noise has not yet been examined, and an electric dipole model employed in previous studies is only accurate for a small subset of possible adsorbates. Here, we analyze the behavior of both in-plane and out-of-plane vibrational modes of twenty-one adsorbate–electrode combinations within the independent fluctuating dipole model, utilizing accurate first principles computational methods to determine the surface-induced dipole moments. We find the chemical specificity of the adsorbate can change the electric field noise by seven orders of magnitude and specifically that soft in-plane modes of weakly-adsorbed hydrocarbons produce the greatest noise and ion heating. We discuss the dynamics captured by the fluctuating dipole model, namely the adsorbate-dependent turn-on temperature and electric field noise magnitude, and also discuss the model’s failure to reproduce the measured 1/ω noise frequency scaling with a single adsorbate species. We suggest future research directions for improved, quantitatively predictive models based on extensions of the present framework to multiple interacting adsorbates.
Motional heating of trapped atomic ions is a major obstacle to their use as quantum bits in a scalable quantum computer. The detailed physical origin of this heating is not well understood, but experimental evidence suggests that it is caused by electric-field noise emanating from the surface of the trap electrodes. In this study, we have investigated the role of adsorbates on the electrodes by identifying contaminant overlayers, implementing an in situ argon-ion-beam cleaning treatment, and measuring ion heating rates before and after treating the trap electrodes' surfaces. We find a 100-fold reduction in heating rate after treatment. The experiments described here are sensitive to low levels of electric-field noise in the MHz frequency range. Therefore, this approach could become a useful tool in surface science that complements established techniques.
Ion traps are promising architectures for implementing scalable quantum computing, but they suffer from excessive "anomalous" heating that prevents their full potential from being realized. This heating, which is orders of magnitude larger than that expected from Johnson-Nyquist noise, results in ion motion that leads to decoherence and reduced fidelity in quantum logic gates. The exact origin of anomalous heating is an open question, but experiments point to adsorbates on trap electrodes as a likely source. Many different models of anomalous heating have been proposed, but these models have yet to pinpoint the atomistic origin of the experimentally-observed 1/ω1/ω1/ω electric field noise scaling observed in ion traps at frequencies between 0.1-10 MHz. In this work, we perform the first computational study of the ion trap electric field noise produced by the motions of multiple monolayers of adsorbates described by first principles potentials. In so doing, we show that correlated adsorbate motions play a definitive role in producing 1/ω1/ω1/ω noise and identify candidate collective adsorbate motions, including translational and rotational motions of adsorbate patches and multilayer exchanges, that give rise to 1/ω1/ω1/ω scaling at the MHz frequencies typically employed in ion traps. These results demonstrate that multi-adsorbate systems, even simple ones, can give rise to a set of activated motions that can produce the 1/ω1/ω1/ω noise observed in ion traps and that collective, rather than individual, adsorbate motions are much more likely to give rise to low-frequency heating.
Electric field noise produced by the surface of ion trap electrodes reduces the fidelity of quantum computing operations. Despite decades of investigation its microscopic origins remain unclear.This thesis investigates the origins of surface electric field noise by examining its dependence on trap temperature. A set of Al-Cu surface Paul traps are fabricated together and sent to MIT Lincoln Labs (MITLL) and the University of California, Berkeley (UCB). MITLL measures noise from 7 K to room temperature above a first trap and UCB measures noise from room temperature to 590 K above a second trap. The noise measurements from the two experiments are combined to study the noise dependence over the full temperature range from 7-590 K. This is the largest temperature range ever studied using a single trap design and connects the temperature ranges used in all previous studies.We find qualitatively different behaviors at low and high temperatures: from 7-430 K we find that the noise follows the same power-law scaling reported in previous cryogenic studies. At temperatures from 430-590 K, we find that the noise increases much more rapidly than predicted by the power-law scaling. We note a particularly sharp rise in noise at 560 K, which is similar to the sharp rise in noise reported in a previous high-temperature study of a different Al-Cu trap. To determine which physical processes are associated with the change in noise at elevated trap temperatures, we investigate how the material state of the trap electrodes changes when they are heated. We find that the primary physical process associated with the change in noise at high temperature is thermally-activated atom diffusion within the films.This thesis also investigates if the surface structure of room-temperature Au ion traps affects noise levels. We use a heat treatment to restructure the surface of the traps and measure the resulting change in noise. We find that the heat treatment leads to significant changes to the surface structure but causes only a modest change to noise levels. This indicates that the heat-induced changes to the surface do not strongly affect noise. We also note that the noise magnitude observed above these Au traps is state-of-the-art for room-temperature, untreated surface ion traps. This noise level can be explained by modeling the contamination that exists on the trap surface as a dielectric with a loss tangent of tan θ ≈ 0.01.Finally, this thesis investigates the origin of elevated noise levels in one region of a Au surface ion trap. We find that micron-sized particles are located where noise levels are highest, indicating that these particles are likely responsible for the noise. We can explain the magnitude, frequency, and distance dependence of the noise if we treat the particles as a lossy dielectric with a loss tangent tan θ ≈ 0.3.