Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1209.3039 · Physical Review A

Advanced detection of information in optical pulses with negative group velocity

Ulrich Vogl, Ryan T. Glasser, Paul D. Lett

Published Sep 25, 2012• 23 citations
arXivHTMLPDF

Abstract

In this Rapid Communication, we experimentally demonstrate that the signal velocity, defined as the earliest time when a signal is detected above the realistic noise floor, may be altered by a region of anomalous dispersion. We encode information in the spatial degree of freedom of an optical pulse so that the imprinted information is not limited by the frequency bandwidth of the region of anomalous dispersion. We then show that the combination of superluminal pulse propagation and realistic detectors with nonideal quantum efficiency leads to a speed-up of the earliest experimentally obtainable arrival time of the transmitted signal even with the overall pulse experiencing unity gain. This speed-up is reliant upon nonideal detectors and losses, as perfect detection efficiency would result in the speed of information being equal to the speed of light in vacuum, regardless of the group velocity of the optical pulses.

DOI
10.1103/physreva.86.031806

Related papers

Signal Velocity, Causality, and Quantum Noise in Superluminal Light Pulse Propagation

A. Kuzmich, Arthur Dogariu, L. J. Wang +2 more

We consider pulse propagation in a linear anomalously dispersive medium where the group velocity exceeds the speed of light in vacuum ( c) or even becomes negative. A signal velocity is defined operationally based on the optical signal-to-noise ratio, and is computed for cases appropriate to the recent experiment where such a negative group velocity was observed. It is found that quantum fluctuations limit the signal velocity to values less than c.

arXiv:physics/0101068•Physical Review Letters•Apr 30, 2001•198 citations

Superluminality and detectable information in dispersive channels

Ahmed H. Dorrah, Mo Mojahedi

Energy exchange between an electromagnetic pulse and dispersive media may result in complicated, yet interesting, phenomena in which the group velocity becomes abnormal (i.e., superluminal or negative). For such cases, signal velocity (velocity of detectable information) remains debatable. In this chapter, we present a systematic study that can be applied to pulse propagation in any dispersive medium in order to quantify the detectable information content and calculate its speed, while accounting for pulse reshaping effects and noise generated in the medium and the detector. Accordingly, we present an operational context within which the constraints of superluminal signaling and its potential applications are shown. We provide scenarios in which the signal velocity is evaluated in microwave circuits with negative group delays and extend the method to include optical pulses in inverted media as well. Such analysis explores the fundamental limitations and capabilities of a broad range of superluminal signaling applications.

Institution of Engineering and Technology eBooks•Nov 26, 2018•0 citations

On the Principle of Causality and Superluminal Signal Propagation Velocities

Nikolai S. Bukhman

Abstract This paper considers the question of superluminal (or negative) group velocities of signals in dispersive media, as well as negative group delay times of signals passing through linear filters. It is shown that information can be transmitted only with the help of jumps in the time dependence of a function or its derivatives and, therefore, the information propagation velocity in any (including dispersive, absorbing, or amplifying) medium exactly coincides with the speed of light in vacuum. As for the group velocity of a wave packet, it is only the propagation velocity of its infinitely differentiable envelope, by means of which the transmission of information, strictly speaking, is impossible. Therefore, in regions with anomalous dispersion, the group velocity can be superluminal or negative without violating the “light limitation” of the theory of relativity or the principle of causality. Examples of situations in which superluminal or negative group velocity occurs are given.

Journal of Communications Technology and Electronics•Mar 1, 2021•8 citations

Pulse propagation at negative group velocity in a transparent medium

Arthur Dogariu, A. Kuzmich, L.J. Wang

Summary form only given. We use gain-assisted linear anomalous dispersion to demonstrate superluminal light pulse propagation with a negative group velocity through a transparent atomic medium. We place two Raman gain peaks closely to obtain an essentially lossless anomalous dispersion region that results in a superluminal group velocity. The group velocity of a pulse in this region exceeds c and can even become negative,while the shape of the pulse is preserved. We measured a negative group velocity index of n/sub g/=-315(/spl plusmn/5). Experimentally, a light pulse propagating through the spin-polarized atomic vapor cell exits from it earlier than propagating through the same distance in vacuum by a time difference that is 315 times of the vacuum light propagation time L/c=0.2 ns.

Quantum Electronics and Laser Science Conference•Nov 13, 2002•1 citation

Velocity of detectable information in faster-than-light pulses

Ahmed H. Dorrah, Mo Mojahedi

The velocity of detectable information (signal velocity) in a medium capable of supporting abnormal (superluminal or negative) group velocities is calculated. This is carried out by tracking the time instant at which the signal-to-noise ratio (SNR) at the detector output reaches a predetermined threshold while considering the total classical and quantum noise of the channel in addition to the detector noise. Furthermore, the method of steepest descent is incorporated to systematically study various forms of pulse reshaping associated with superluminal propagation and its effect on SNR. By studying the behavior of SNR as a function of both space and time, the present analysis predicts the existence of a cutoff distance beyond which signal velocity of a superluminal pulse is delayed as compared to a companion pulse traveling the same distance in vacuum. Finally, the interplay between the relative strength of the medium-generated noise and the detector noise and its effect on signal velocity is discussed.

Physical Review A•Sep 16, 2014•7 citations

Negative group velocity

Kirk T. McDonald

The group velocity for pulses in an optical medium can be negative at frequencies between those of a pair of laser-pumped spectral lines. The gain medium then can amplify the leading edge of a pulse resulting in a time advance of the pulse when it exits the medium, as has been recently demonstrated in the laboratory. This effect has been called superluminal, but, as a classical analysis shows, it cannot result in signal propgation at speeds greater than that of light in vacuum.

arXiv:physics/0008013•American Journal of Physics•May 1, 2001•41 citations
In this Rapid Communication, we experimentally demonstrate that the signal velocity, defined as the earliest time when a signal is detected above the realistic noise floor, may be altered by a region of anomalous dispersion. We encode information in the spatial degree of freedom of an optical pulse so that the imprinted information is not limited by the frequency bandwidth of the region of anomalous dispersion. We then show that the combination of superluminal pulse propagation and realistic detectors with nonideal quantum efficiency leads to a speed-up of the earliest experimentally obtainable arrival time of the transmitted signal even with the overall pulse experiencing unity gain. This speed-up is reliant upon nonideal detectors and losses, as perfect detection efficiency would result in the speed of information being equal to the speed of light in vacuum, regardless of the group velocity of the optical pulses.
Energy exchange between an electromagnetic pulse and dispersive media may result in complicated, yet interesting, phenomena in which the group velocity becomes abnormal (i.e., superluminal or negative). For such cases, signal velocity (velocity of detectable information) remains debatable. In this chapter, we present a systematic study that can be applied to pulse propagation in any dispersive medium in order to quantify the detectable information content and calculate its speed, while accounting for pulse reshaping effects and noise generated in the medium and the detector. Accordingly, we present an operational context within which the constraints of superluminal signaling and its potential applications are shown. We provide scenarios in which the signal velocity is evaluated in microwave circuits with negative group delays and extend the method to include optical pulses in inverted media as well. Such analysis explores the fundamental limitations and capabilities of a broad range of superluminal signaling applications.
Abstract This paper considers the question of superluminal (or negative) group velocities of signals in dispersive media, as well as negative group delay times of signals passing through linear filters. It is shown that information can be transmitted only with the help of jumps in the time dependence of a function or its derivatives and, therefore, the information propagation velocity in any (including dispersive, absorbing, or amplifying) medium exactly coincides with the speed of light in vacuum. As for the group velocity of a wave packet, it is only the propagation velocity of its infinitely differentiable envelope, by means of which the transmission of information, strictly speaking, is impossible. Therefore, in regions with anomalous dispersion, the group velocity can be superluminal or negative without violating the “light limitation” of the theory of relativity or the principle of causality. Examples of situations in which superluminal or negative group velocity occurs are given.
Summary form only given. We use gain-assisted linear anomalous dispersion to demonstrate superluminal light pulse propagation with a negative group velocity through a transparent atomic medium. We place two Raman gain peaks closely to obtain an essentially lossless anomalous dispersion region that results in a superluminal group velocity. The group velocity of a pulse in this region exceeds c and can even become negative,while the shape of the pulse is preserved. We measured a negative group velocity index of n/sub g/=-315(/spl plusmn/5). Experimentally, a light pulse propagating through the spin-polarized atomic vapor cell exits from it earlier than propagating through the same distance in vacuum by a time difference that is 315 times of the vacuum light propagation time L/c=0.2 ns.
The velocity of detectable information (signal velocity) in a medium capable of supporting abnormal (superluminal or negative) group velocities is calculated. This is carried out by tracking the time instant at which the signal-to-noise ratio (SNR) at the detector output reaches a predetermined threshold while considering the total classical and quantum noise of the channel in addition to the detector noise. Furthermore, the method of steepest descent is incorporated to systematically study various forms of pulse reshaping associated with superluminal propagation and its effect on SNR. By studying the behavior of SNR as a function of both space and time, the present analysis predicts the existence of a cutoff distance beyond which signal velocity of a superluminal pulse is delayed as compared to a companion pulse traveling the same distance in vacuum. Finally, the interplay between the relative strength of the medium-generated noise and the detector noise and its effect on signal velocity is discussed.