Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1208.1946 · Physical Review A

First-order sidebands in circuit QED using qubit frequency modulation

Félix Beaudoin, Marcus Palmer Da Silva, Zachary Dutton, Alexandre Blais

Published Aug 3, 2012• 106 citations
arXivHTMLPDF

Abstract

Sideband transitions have been shown to generate controllable interaction between superconducting qubits and microwave resonators. Up to now, these transitions have been implemented with voltage drives on the qubit or the resonator, with the significant disadvantage that such implementations only lead to second-order sideband transitions. Here we propose an approach to achieve first-order sideband transitions by relying on controlled oscillations of the qubit frequency using a flux-bias line. Not only can first-order transitions be significantly faster, but the same technique can be employed to implement other tunable qubit-resonator and qubit-qubit interactions. We discuss in detail how such first-order sideband transitions can be used to implement a high fidelity controlled-not operation between two transmons coupled to the same resonator.

DOI
10.1103/physreva.86.022305

Related papers

Hardware-Efficient Microwave-Activated Tunable Coupling Between Superconducting Qubits

Bradley Mitchell, Ravi Naik, Alexis Morvan +7 more

Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable $ZZ$ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off-resonantly. We show tunable coupling over one order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave crosstalk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of $99.43(1)\%$ as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.

•May 11, 2021•11 citations

Hardware-Efficient Microwave-Activated Tunable Coupling between Superconducting Qubits

Bradley K. Mitchell, Ravi Naik, Alexis Morvan +7 more

Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.

arXiv:2105.05384•Physical Review Letters•Nov 9, 2021•78 citations

Flux-tunable superconducting transmons for quantum information processing

Matthew Ware

In this thesis, I describe a series of experiments using flux-tunable transmon qubits for quantum information processing. These qubits are designed with different levels of Josephson junction asymmetry. The first two chapters of this thesis will introduce the reader to superconducting qubits and circuit quantum electrodynamics. I will present experiments using the cQED architecture to implement fast photon swapping between an asymmetric qubit and a superconducting resonator using flux-driven sidebands. This is the first experimental observation of flux-driven sidebands in a superconducting system. This process also allows photon swaps between qubit and resonator to first order in the qubit-resonator coupling strength. I will detail an experiment to study and optimize an all-microwave two-qubit gate using the cross-resonance effect. This work constitutes the first experimental study of the cross-resonance effect vs. frequency and confirms effects from the higher energy levels of the transmon in the effective coupling during a cross-resonant drive. Lastly, I will outline a theoretical analysis and initial experiments to study the coherence properties of asymmetric transmons.

•Jan 1, 2015•2 citations

First-order sideband transitions with flux-driven asymmetric transmon qubits

Joel Strand, Matthew Ware, Félix Beaudoin +4 more

We demonstrate rapid, first-order sideband transitions between a superconducting resonator and a frequency-modulated transmon qubit. The qubit contains a substantial asymmetry between its Josephson junctions leading to a linear portion of the energy band near the resonator frequency. The sideband transitions are driven with a magnetic flux signal of a few hundred MHz coupled to the qubit. This modulates the qubit splitting at a frequency near the detuning between the dressed qubit and resonator frequencies, leading to rates up to 85 MHz for exchanging quanta between the qubit and resonator.

arXiv:1301.0535•Physical Review B•Jun 7, 2013•166 citations

Microwave-induced amplitude- and phase-tunable qubit-resonator coupling in circuit quantum electrodynamics

Sina Zeytinoǧlu, Marek Pechal, S. Berger +3 more

In the circuit quantum electrodynamics architecture, both the resonance frequency and the coupling of superconducting qubits to microwave field modes can be controlled via external electric and magnetic fields to explore qubit-photon dynamics in a wide parameter range. Here, we experimentally demonstrate and analyze a scheme for tuning the coupling between a transmon qubit and a microwave resonator using a single coherent drive tone. We treat the transmon as a three-level system, with the qubit subspace defined by the ground and the second excited states. If the drive frequency matches the difference between the resonator and the qubit frequencies, a Jaynes-Cummings-type interaction is induced, which is tunable in both amplitude and phase. We show that coupling strengths of about 10 MHz can be achieved in our setup, limited only by the anharmonicity of the transmon qubit. This scheme has been successfully used to generate microwave photons with a controlled temporal shape [M. Pechal et al., Phys. Rev. X 4, 041010 (2014)] and can be directly implemented with superconducting quantum devices featuring larger anharmonicity for higher coupling strengths.

arXiv:1502.03692•Physical Review A•Apr 30, 2015•97 citations

Control of the transition frequency of a superconducting flux qubit by longitudinal coupling to the photon number degree of freedom in a resonator

Hiraku Toida, Takuya Ohrai, Yuichiro Matsuzaki +2 more

We control the transition frequency of a superconducting flux qubit coupled to a frequency-tunable resonator comprising a direct current superconducting quantum interference device (dc SQUID) by microwave driving. The dc SQUID mediates the coupling between microwave photons in the resonator and a flux qubit. The polarity of the frequency shift depends on the sign of the flux bias for the qubit and can be both positive and negative. The absolute value of the frequency shift becomes larger by increasing the photon number in the resonator. These behaviors are reproduced by a model considering the magnetic interaction between the flux qubit and dc SQUID. The tuning range of the transition frequency of the flux qubit reaches $\ensuremath{\approx}1.9\phantom{\rule{0.16em}{0ex}}\mathrm{GHz}$. The effect of photon number fluctuation in the resonator to the dephasing rate of the flux qubit is also discussed.

arXiv:2005.06155•Physical review. B./Physical review. B•Sep 3, 2020•5 citations
Sideband transitions have been shown to generate controllable interaction between superconducting qubits and microwave resonators. Up to now, these transitions have been implemented with voltage drives on the qubit or the resonator, with the significant disadvantage that such implementations only lead to second-order sideband transitions. Here we propose an approach to achieve first-order sideband transitions by relying on controlled oscillations of the qubit frequency using a flux-bias line. Not only can first-order transitions be significantly faster, but the same technique can be employed to implement other tunable qubit-resonator and qubit-qubit interactions. We discuss in detail how such first-order sideband transitions can be used to implement a high fidelity controlled-not operation between two transmons coupled to the same resonator.
Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZZZZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off-resonantly. We show tunable coupling over one order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave crosstalk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)%99.43(1)\%99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.
Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.
In this thesis, I describe a series of experiments using flux-tunable transmon qubits for quantum information processing. These qubits are designed with different levels of Josephson junction asymmetry. The first two chapters of this thesis will introduce the reader to superconducting qubits and circuit quantum electrodynamics. I will present experiments using the cQED architecture to implement fast photon swapping between an asymmetric qubit and a superconducting resonator using flux-driven sidebands. This is the first experimental observation of flux-driven sidebands in a superconducting system. This process also allows photon swaps between qubit and resonator to first order in the qubit-resonator coupling strength. I will detail an experiment to study and optimize an all-microwave two-qubit gate using the cross-resonance effect. This work constitutes the first experimental study of the cross-resonance effect vs. frequency and confirms effects from the higher energy levels of the transmon in the effective coupling during a cross-resonant drive. Lastly, I will outline a theoretical analysis and initial experiments to study the coherence properties of asymmetric transmons.
We demonstrate rapid, first-order sideband transitions between a superconducting resonator and a frequency-modulated transmon qubit. The qubit contains a substantial asymmetry between its Josephson junctions leading to a linear portion of the energy band near the resonator frequency. The sideband transitions are driven with a magnetic flux signal of a few hundred MHz coupled to the qubit. This modulates the qubit splitting at a frequency near the detuning between the dressed qubit and resonator frequencies, leading to rates up to 85 MHz for exchanging quanta between the qubit and resonator.
In the circuit quantum electrodynamics architecture, both the resonance frequency and the coupling of superconducting qubits to microwave field modes can be controlled via external electric and magnetic fields to explore qubit-photon dynamics in a wide parameter range. Here, we experimentally demonstrate and analyze a scheme for tuning the coupling between a transmon qubit and a microwave resonator using a single coherent drive tone. We treat the transmon as a three-level system, with the qubit subspace defined by the ground and the second excited states. If the drive frequency matches the difference between the resonator and the qubit frequencies, a Jaynes-Cummings-type interaction is induced, which is tunable in both amplitude and phase. We show that coupling strengths of about 10 MHz can be achieved in our setup, limited only by the anharmonicity of the transmon qubit. This scheme has been successfully used to generate microwave photons with a controlled temporal shape [M. Pechal et al., Phys. Rev. X 4, 041010 (2014)] and can be directly implemented with superconducting quantum devices featuring larger anharmonicity for higher coupling strengths.
We control the transition frequency of a superconducting flux qubit coupled to a frequency-tunable resonator comprising a direct current superconducting quantum interference device (dc SQUID) by microwave driving. The dc SQUID mediates the coupling between microwave photons in the resonator and a flux qubit. The polarity of the frequency shift depends on the sign of the flux bias for the qubit and can be both positive and negative. The absolute value of the frequency shift becomes larger by increasing the photon number in the resonator. These behaviors are reproduced by a model considering the magnetic interaction between the flux qubit and dc SQUID. The tuning range of the transition frequency of the flux qubit reaches $\ensuremath{\approx}1.9\phantom{\rule{0.16em}{0ex}}\mathrm{GHz}$. The effect of photon number fluctuation in the resonator to the dephasing rate of the flux qubit is also discussed.