In the framework of quantum computational tensor network, which is a general framework of measurement-based quantum computation, the resource many-body state is represented in a tensor-network form (or a matrix-product form), and universal quantum computation is performed in a virtual linear space, which is called a correlation space, where tensors live. Since any unitary operation, state preparation, and the projection measurement in the computational basis can be simulated in a correlation space, it is natural to expect that fault-tolerant quantum circuits can also be simulated in a correlation space. However, we point out that not all physical errors on physical qudits appear as linear completely-positive trace-preserving errors in a correlation space. Since the theories of fault-tolerant quantum circuits known so far assume such noises, this means that the simulation of fault-tolerant quantum circuits in a correlation space is not so straightforward for general resource states.
We investigate relationships between computational power and correlation in resource states for quantum computational tensor network, which is a general framework for measurement-based quantum computation. We find that if the size of resource states is finite, not all resource states allow correct projective measurements in the correlation space, which is related to nonvanishing two-point correlations in the resource states. On the other hand, for infinite-size resource states, we can always implement correct projective measurements if the resource state can simulate arbitrary single-qubit rotations, since such a resource state exhibits exponentially decaying two-point correlations. This implies that a many-body state whose two-point correlation cannot be upper bounded by an exponentially decaying function cannot simulate arbitrary single-qubit rotations.
We prove a fault-tolerance theorem for quantum computation against adversarial noise. For every quantum circuit on
Nˉ logical qudits of depth
Tˉ, we construct a fault-tolerant circuit on
N=poly(Nˉ) physical qudits of depth
Tˉ⋅Nˉo(1), which is robust against an adversary who may arbitrarily choose and corrupt an almost-linear number
N1−o(1) of physical qudits at each time step. This robustness significantly improves upon prior fault-tolerance theorems, which assumed corruptions were either local and stochastic, or else only act on a polynomially vanishing fraction of qudits.
Our fault-tolerance scheme addresses a key bottleneck towards constructing quantum PCPs via the circuit-to-Hamiltonian mapping of Anshu, Breuckmann, and Nguyen (STOC'24). More fundamentally, our result demonstrates that fault-tolerant quantum computation remains possible under noise models that are global, worst-case, and non-Markovian over the full duration of the computation, directly countering concerns that correlated noise could fundamentally undermine quantum fault tolerance.
Our construction is based on a new family of subsystem product codes we develop, which have large dimension and distance along with low-weight parity-checks, and which support transversal non-Clifford gates. We show how to perform single-shot fault-tolerant error correction on these codes using a Floquet-like procedure based on the local testability of classical tensor codes. We then obtain a universal fault-tolerance scheme using repeated code switching in a hypercubic qudit architecture. Finally, we recursively compose our scheme with itself to reduce an initially exponential qudit dimension down to a constant.
This thesis is concerned with certain theoretical problems that arise naturally in the context of fault-tolerant quantum computation. Fault-tolerance can be defined as the art of building reliable devices from unreliable components, and is of particular importance for quantum computers that aim to precisely control the dynamics of extremely sensitive quantum systems. A model of quantum computation is a specification of the basic building blocks by which a quantum computation is implemented. The best known model is the quantum circuit model, where computations are implemented by means of unitary quantum gates that are applied to two-level quantum systems known as qubits. In a physical implementation of a quantum circuit, the gates and qubits will inevitably be affected by noise. Fault-tolerant quantum circuits are designed to be resilient against the effects of this noise, provided that it is not too strong. Fault-tolerance in the quantum circuit model is well developed thanks to the theory of quantum error-correcting codes. These codes allow for the correction of small numbers of errors introduced by a variety of noise processes. In a fault-tolerant quantum circuit, qubits are replaced with encoded qubits, and quantum gates with encoded gates that are immediately followed by special quantum circuits for error correction. Provided the rate at which errors occur is below a constant threshold value, the accumulation of errors can be checked so that the correct output of the computation correctly determined. The threshold acts as both a measure of how good the design of a quantum circuit is, and also as a target for experimenters aiming to implement quantum circuits. Much current research in quantum computation is aimed at designing quantum circuits that increase the noise threshold, hopefully to the point where it becomes within the reach of experimenters. A fault-tolerant encoded quantum gate must limit the propagation of errors so that the code’s corrective capabilities are not overwhelmed. It is not so easy to design encoded gates that satisfy this property, and to date only a finite handful of such gates are known. In a faulttolerant quantum circuit, all quantum gates must be decomposed or compiled in terms of those that may be implemented fault-tolerantly. In the first part of this thesis, we present two results that may be applied to this problem of gate compilation. The first is a generic method based on the Solovay-Kitaev theorem that may be applied to all quantum gates, but is most effective for those that act on single qubits. We present the Solovay-Kitaev theorem in its simples known form as an algorithm, together with novel constructions that can be used to implement it. Following this we give a two specialized methods for two-qubit gate decomposition, based on the Cartan decomposition of the Lie group SU(4). The cluster-state model of computation is an alternative to the quantum circuit model, and makes use of quantum measurements and highly entangled cluster-states to implement a quantum computation. The fault-tolerant techniques developed for quantum circuits are not immediately applicable in this model, so in order for it to be a realistic candidate for performing computations we prove that such techniques are possible. In the second part of the thesis we prove that constant fault-tolerance thresholds may be achieved in the cluster-state model, and in particular in an adaption to an optical implementation. Following this we design a complete error correction scheme for optical cluster-state computation, and numerically determine the threshold of this model in the face of the dominant noise models likely to affect such an implementation.
This paper shows that quantum computation can be made fault-tolerant against errors and inaccuracies when
η, the probability for an error in a qubit or a gate, is smaller than a constant threshold
ηc. This result improves on Shor's result [Proceedings of the 37th Symposium on the Foundations of Computer Science, IEEE, Los Alamitos, CA, 1996, pp. 56–65], which shows how to perform fault-tolerant quantum computation when the error rate
η decays polylogarithmically with the size of the computation, an assumption which is physically unreasonable. The cost of making the quantum circuit fault-tolerant in our construction is polylogarithmic in time and space. Our result holds for a very general local noise model, which includes probabilistic errors, decoherence, amplitude damping, depolarization, and systematic inaccuracies in the gates. Moreover, we allow exponentially decaying correlations between the errors both in space and in time. Fault-tolerant computation can be performed with any universal set of gates. The result also holds for quantum particles with
p>2 states, namely, p-qudits, and is also generalized to one-dimensional quantum computers with only nearest-neighbor interactions. No measurements, or classical operations, are required during the quantum computation. We estimate the threshold of our construction to be
ηc≃10−6, in the best case. By this we show that local noise is in principle not an obstacle for scalable quantum computation. The main ingredient of our proof is the computation on states encoded by a quantum error correcting code (QECC). To this end we introduce a special class of Calderbank–Shor–Steane (CSS) codes, called polynomial codes (the quantum analogue of Reed–Solomon codes). Their nice algebraic structure allows all of the encoded gates to be transversal. We also provide another version of the proof which uses more general CSS codes, but its encoded gates are slightly less elegant. To achieve fault tolerance, we encode the quantum circuit by another circuit by using one of these QECCs. This step is repeated polyloglog many times, each step slightly improving the effective error rate, to achieve the desired reliability. The resulting circuit exhibits a hierarchical structure, and for the analysis of its robustness we borrow terminology from Khalfin and Tsirelson [Found. Phys., 22 (1992), pp. 879–948] and Gács [Advances in Computing Research: A Research Annual: Randomness and Computation, JAI Press, Greenwich, CT, 1989]. The paper is to a large extent self-contained. In particular, we provide simpler proofs for many of the known results we use, such as the fact that it suffices to correct for bit-flips and phase-flips, the correctness of CSS codes, and the fact that two-qubit gates are universal, together with their extensions to higher-dimensional particles. We also provide full proofs of the universality of the sets of gates we use (the proof of universality was missing in Shor's paper). This paper thus provides a self-contained and complete proof of universal fault-tolerant quantum computation in the presence of local noise.
Quantum computing exists at the intersection of mathematics, physics, chemistry, and engineering; the main goal of quantum computing is the creation of devices and algorithms which use the properties of quantum mechanics to store, manipulate and measure information. There exist many families of algorithms, which, using non-classical logical operations, can outperform traditional, classical algorithms in terms of memory and processing requirements. In addition, quantum computing devices are fundamentally smaller than classical processors and memory elements; since the physical models governing their performance are applicable on all scales, as opposed to classical logic elements, whose underlying principles rely on the macroscopic nature of the device in question. \n \nQuantum algorithms, for the most part, are predicated on a theory of resources. It is often assumed that quantum computers can be placed in a precise fiducial state prior to computation, and that logical operations are perfect, inducing no error on the system which they affect. These assumptions greatly simplify algorithmic design, but are fundamentally unrealistic. In order to justify their use, it is necessary to develop a framework for using a large number of imperfect devices to simulate the action of a perfect device, with some acceptable probability of failure. This is the study of fault-tolerant quantum computing. In order to pursue this study effectively, it is necessary to understand the fundamental nature of generic quantum states and operations, as well as the means by which one can correct quantum errors. Additionally, it is important to attempt to minimize the use of computational resources in achieving error reduction and fault-tolerant computing. \n \nThis thesis is concerned with three projects related to the use of error-prone quantum systems to transmit and manipulate information. The first of these is concerned with the use of imperfectly-prepared states in error-correction routines. Using optimal quantum error correction, we are able to deduce a method of partially protecting encoded quantum information against preparation errors prior to encoding, using no additional qubits. The second of these projects details the search for entangled states which can be used to transmit classical information over quantum channels at a rate superior to classical states. The third of these projects concerns the transcoding of data from one quantum code into another using few ancillary resources. The descriptions of these projects are preceded by a brief introduction to representations of quantum states and channels, for completeness. \n \nThree techniques of general interest are presented in appendices. The first is an introduction to, and a minor advance in the development of optimal error correction codes. The second is a more efficient means of calculating the action of a quantum channel on a given state, given that the channel acts non-trivially only on a subsystem, rather than the entire system. Finally, we include documentation on a software package developed to aid the search for quantum transcoding operations.