A complete physical approach to quantum information requires a robust interface among flying qubits, long-lifetime memory, and computational qubits. Here we present a unified interface for microwave and optical photons, potentially connecting engineerable quantum devices such as superconducting qubits at long distances through optical photons. Our approach uses an ultracold ensemble of atoms for two purposes: quantum memory and to transduce excitations between the two frequency domains. Using coherent control techniques, we examine an approach for converting and storing quantum information between microwave photons in superconducting resonators, ensembles of ultracold atoms, and optical photons, as well as a method for transferring information between two resonators.
A complete physical approach to quantum information requires a robust interface among flying qubits, long-lifetime memory, and computational qubits. Here we present a unified interface for microwave and optical photons, potentially connecting engineerable quantum devices such as superconducting qubits at long distances through optical photons. Our approach uses an ultracold ensemble of atoms for two purposes: quantum memory and to transduce excitations between the two frequency domains. Using coherent control techniques, we examine an approach for converting and storing quantum information between microwave photons in superconducting resonators, ensembles of ultracold atoms, and optical photons, as well as a method for transferring information between two resonators.
A protocol is discussed which allows one to realize a transducer for single photons between the optical and the microwave frequency range. The transducer is a spin ensemble, where the individual emitters possess both an optical and a magnetic-dipole transition. Reversible frequency conversion is realized by combining optical photon storage, by means of electromagnetically induced transparency, with the controlled switching of the coupling between the magnetic-dipole transition and a superconducting qubit, which is realized by means of a microwave cavity. The efficiency is quantified by the global fidelity for coherently transferring a qubit excitation between a single optical photon and the superconducting qubit. We test various strategies and show that the total efficiency is essentially limited by the optical quantum memory: It can exceed 80% for ensembles of nitrogen-vacancy centers and approaches 99% for cold atomic ensemble, assuming state-of-the-art experimental parameters. This protocol allows one to bridge the gap between the optical and the microwave regime in order to efficiently combine superconducting and optical components in quantum networks.
We examine the possibility of coherent reversible information transfer between solid-state superconducting qubits and ensembles of ultracold atoms. Strong coupling between these systems is mediated by a microwave transmission line resonator that interacts near resonantly with the atoms via their optically excited Rydberg states. The solid-state qubits can then be used to implement rapid quantum logic gates, while collective metastable states of the atoms can be employed for long-term storage and optical readout of quantum information.
Atoms and photons, two things so different but yet so alike. The former, the building block of matter, something we learn about in school and imagine it as some tiny marbles encircled by other tinier marbles. The latter, an electromagnetic wave, a light particle or an excitation of the electromagnetic field. Quantum mechanics tells us about the properties of these two entities. And even if it sounds, looks and writes counter-intuitive, it has proven right for over a century now. In this work, I elaborate on how we tested the laws of quantum mechanics and how we used them learn more about the tiny building blocks of nature and the fields they use to talk to each other. The atoms we use, are artificial. Superconducting qubits, small electrical circuits with quantized energy levels behave like electrons that transition between different orbitals in an atom. One of the qubits' advantages, is also a big disadvantage. We design the circuits' energy levels and fabricate them in a cleanroom. This allows for arbitrary spaced energy levels but in contrast to real atoms, prevents two superconducting qubits from being alike. Still, this qubit platform is one of the frontrunners for future quantum computing technology and testing fundamental physics due to their scalability. We interface superconducting qubits, which operate in the GHz regime, with microwave photons. We use 3D aluminum cavities as mediators between qubits and photons. The cavities allow for non-destructive readout of the qubit state, they shield the qubits from noise at the qubit frequency and they give us an easy way to frequency-tune these joint systems. We need to operate superconducting qubits and their cavities at millikelvin temperatures in dilution refrigerators. At higher temperatures, superconductivity suffers and even worse, the environment is filled with thermal noise photons. This poses a fundamental limitation on the scalability of superconducting qubit devices. Also connecting multiple devices in different fridges does not work over room temperature links because the microwave photons used for this purpose will be covered in noise and the quantum information they carry, will be unusable. Infrared photons do not suffer from this noise problem since there are close to zero thermal noise photons at their frequencies at room temperature. We cannot simply interface superconducting devices with optical photons due their frequency mismatch and the destructive effect of optical photons on superconductors. Therefore, we use microwave-to-optics transducers that allow to convert microwave photons into optical ones and vice-versa. The transducers that we use are macroscopic electro-optic transducers using the Pockels effect in a disk-shaped Lithium Niobate whispering gallery mode resonator. By using a strong optical pump, photons from the two frequency domains experience a beam-splitter interaction and get converted from one to the other. We measure the generated optical photons using elaborate optical setups, optical heterodyning and single photon detectors to gain knowledge about the qubit state or the converted microwave photons. Bridging the microwave and the optical world allows us to take advantage of both of their strengths but it also requires deep knowledge about both of their working principles. In this work, we describe two experiments that our group conducted to showcase the opportunities that arise from interfacing superconducting qubits with optical photons but also the pitfalls, one may encounter on the way. In the first experiment, we managed to all-optically read out a superconducting qubit. We show that the assignment fidelity, the probability that a measurement of the qubit state matches the prepared state, is close to equal for all-optical, microwave-to-optics and conventional microwave readout. We show T1 and T2 measurements for all three readout types and give an analysis of the noise caused by the optics. Finally, we show that the infrared light does not affect the qubit performance in a negative way but that the heating it causes does. This is an important insight that we used in the next experiment. The second experiment is the upconversion of itinerant single microwave photons to the optical domain. We show that we can generate single microwave photons from a qubit-cavity system. We upconvert these single photons, measure them with a single photon detector and reconstruct their shape. By conducting a single photon Rabi measurement, we show correlations between the microwave and the optical domain. And by thorough signal-to-noise measurements and noise analysis, we find that we can generate single infrared photons with high signal-to-noise ratio 5.1 and low transducer added noise (<0.012 quanta). We show that this measurement creates a path towards entanglement of a superconducting qubit and an optical photon and what parameters need to be improved to achieve it. Additionally, this experiment is a proof of principle for an on-demand infrared single photon source. More generally, it allows to link microwave quantum technology in general to the optical domain.
Microwave-optical transducers and quantum memories are essential for quantum repeaters enabling a quantum internet. Despite advances in both technologies, integrating these functionalities remains challenging. Here, we theoretically propose and experimentally demonstrate an on-demand microwave-optical quantum transducer based on a Rydberg ensemble. Using cascaded electromagnetically induced transparency, we store microwave photons in a highly excited collective state and convert them into optical photons during retrieval. Leveraging an optical depth of millions for microwave photons and minimal single-photon-level dephasing, our transducer achieves around 90% area-normalized storage efficiency, 2.3 MHz bandwidth, and noise-equivalent temperature of 26 K under cavity-free conditions. Furthermore, our system is cryogenically compatible and extendable for high single-photon conversion efficiency without requiring optical cavity coupling. These findings advance practical on-demand quantum interfaces with broad applications across atomic and solid-state platforms. A quantum internet would link computers over optical fibers, which would require converting their signals into frequencies that can travel by fiber and storing those signals to keep them in sync. The authors built a proof-of-concept from a Rydberg ensemble of cold rubidium atoms, that does both jobs.
Abstract Optical quantum networks can connect distant quantum processors to enable secure quantum communication and distributed quantum computing. Superconducting qubits are a leading technology for quantum information processing but cannot couple to long-distance optical networks without an efficient, coherent, and low noise interface between microwave and optical photons. Here, we demonstrate a microwave-to-optical transducer using an ensemble of erbium ions that is simultaneously coupled to a superconducting microwave resonator and a nanophotonic optical resonator. The coherent atomic transitions of the ions mediate the frequency conversion from microwave photons to optical photons and using photon counting we observed device conversion efficiency approaching 10 −7 . With pulsed operation at a low duty cycle, the device maintained a spin temperature below 100 mK and microwave resonator heating of less than 0.15 quanta.
The coherent conversion of microwave to optical signals is for now a missing hardware for long-distance quantum communication between superconducting quantum (sub)processors that could form the nodes of a future quantum network. Various architectures for quantum simulations and information processing are being currently explored with different TRL levels. Among these, circuits of superconducting qubits have already moved from the fundamental research environment to the R&D units of companies. Recent developments have shown extraordinary abilities for performing fast and high-fidelity quantum logic operations. Their limitations are short coherence times precluding long-term storage of quantum information, and the difficulty of coupling distant quantum registers using microwave photons that are (near)resonant with qubit transitions. There is thus a need for (i) a quantum memory compatible with superconducting qubits, and (ii) a microwave to optical transducer to demonstrate the complete communication protocol between distant sub-registers consisting of a moderate number of superconducting qubits. Cold alkaline atoms which have long coherence time and possess transitions both in the MW and optical domain could certainly help improve on these limitations. In this presentation, I will describe how an integrated atom chip compatible with superconducting quantum processors and optical communication networks will be realized within the newly funded MOCA consortium that received the support from the QuantERA ERA-NET Cofund. I will also specifically discuss a newly developed solution to transport atoms in the near field of surfaces were the atom-light coupling strength will be enhanced.