© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:1110.2158 · Journal of Physics A Mathematical and Theoretical

Corner free energies and boundary effects for Ising, Potts and fully packed loop models on the square and triangular lattices

Eric Vernier, Jesper Lykke Jacobsen

Published Jan 4, 2012• 29 citations

Abstract

We obtain long series expansions for the bulk, surface and corner free energies for several two-dimensional statistical models, by combining Enting's finite lattice method (FLM) with exact transfer matrix enumerations. The models encompass all integrable curves of the Q -state Potts model on the square and triangular lattices, including the antiferromagnetic transition curves and the Ising model ( Q = 2) at temperature T , as well as a fully packed O( n ) type loop model on the square lattice. The expansions are around the trivial fixed points at infinite Q , n or 1/ T . By using a carefully chosen expansion parameter, q ≪ 1, all expansions turn out to be of the form , where the coefficients α k and β k are periodic functions of k . Thanks to this periodicity property, we can conjecture the form of the expansions to all orders (except in a few cases where the periodicity is too large). These expressions are then valid for all 0 ⩽ q < 1. We analyse in detail the q → 1 − limit in which the models become critical. In this limit the divergence of the corner free energy defines a universal term which can be compared with the conformal field theory (CFT) predictions of Cardy and Peschel. This allows us to deduce the asymptotic expressions for the correlation length in several cases. Finally we work out the FLM formulae for the case where some of the system's boundaries are endowed with particular (non-free) boundary conditions. We apply this in particular to the square-lattice Potts model with Jacobsen–Saleur boundary conditions, conjecturing the expansions of the surface and corner free energies to arbitrary order for any integer value of the boundary interaction parameter r . These results are in turn compared with CFT predictions.

DOI: 10.1088/1751-8113/45/4/045003

Related papers

Bulk, surface and corner free energies of the anisotropic triangular Ising model: series expansions and critical behaviour

R. J. Baxter

We consider the anisotropic Ising model on the triangular lattice with finite boundaries, and use Kaufman's spinor method to calculate low-temperature series expansions for the partition function to high order. From these we can obtain 108-term series expansions for the bulk, surface and corner free energies. We extrapolate these to all terms and thereby conjecture the exact results for each. Our results agree with the exactly known bulk free energy. For the isotropic case, they also agree with Vernier and Jacobsen's conjecture for the $60^{\circ}$ corners, and with Cardy and Peschel's conformal invariance predictions for the dominant behaviour at criticality.

arXiv:1909.00518•Sep 2, 2019•1 citation

The bulk, surface and corner free energies of the anisotropic triangular Ising model

R. J. Baxter

We consider the anisotropic Ising model on the triangular lattice with finite boundaries, and use Kaufman’s spinor method to calculate low-temperature series expansions for the partition function to high order. From these, we can obtain 108-term series expansions for the bulk, surface and corner free energies. We extrapolate these to all terms and thereby conjecture the exact results for each. Our results agree with the exactly known bulk-free energy and with Cardy and Peschel’s conformal invariance predictions for the dominant behaviour at criticality. For the isotropic case, they also agree with Vernier and Jacobsen’s conjecture for the 60 ° corners.

Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences•Feb 1, 2020•3 citations

Surface magnetisation of the 3-state Potts model with free and fixed boundaries on the square lattice

Ian Graham Enting

The finite lattice method is used to derive low-temperature series expansions for surface magnetisations for the 3-state Potts model on the square lattice, for both fixed and free boundary conditions. Combinatorial weights required for surface corrections to the free energy have been generalised to include cases with explicit surface interactions. Analysis of series for the surface correction to the bulk magnetisation is consistent with the generic scaling prediction, assuming a slow convergence comparable to that found in analysis of Potts model series for bulk properties. For free boundaries, analysis of the ordering of the surface layer confirms the specific Potts model result derived from conformal invariance.

Journal of Physics Conference Series•Jun 1, 2006•2 citations

Critical two-dimensional Ising model with free, fixed ferromagnetic, fixed antiferromagnetic, and double antiferromagnetic boundaries

Xintian Wu, Nickolay Izmailyan

The critical two-dimensional Ising model is studied with four types boundary conditions: free, fixed ferromagnetic, fixed antiferromagnetic, and fixed double antiferromagnetic. Using bond propagation algorithms with surface fields, we obtain the free energy, internal energy, and specific heat numerically on square lattices with a square shape and various combinations of the four types of boundary conditions. The calculations are carried out on the square lattices with size N×N and 30<N<1000. The numerical data are analyzed with finite-size scaling. The bulk, edge, and corner terms are extracted very accurately. The exact results are conjectured for the corner logarithmic term in the free energy, the edge logarithmic term in the internal energy, and the corner logarithmic term in the specific heat. The corner logarithmic terms in the free energy agree with the conformal field theory very well.

Physical Review E•Jan 5, 2015•14 citations

The square lattice Ising model on the rectangle II: finite-size scaling limit

Alfred Hucht

Abstract Based on the results published recently (Hucht 2017 J. Phys. A: Math. Theor . 50 065201), the universal finite-size contributions to the free energy of the square lattice Ising model on the L × M rectangle, with open boundary conditions in both directions, are calculated exactly in the finite-size scaling limit L , M → ∞ , T → T c , with fixed temperature scaling variable x ∝ ( T / T c − 1 ) M and fixed aspect ratio ρ ∝ L / M . We derive exponentially fast converging series for the related Casimir potential and Casimir force scaling functions. At the critical point T = T c we confirm predictions from conformal field theory (Cardy and Peschel 1988 Nucl. Phys . B 300 377, Kleban and Vassileva 1991 J. Phys. A: Math. Gen . 24 3407). The presence of corners and the related corner free energy has dramatic impact on the Casimir scaling functions and leads to a logarithmic divergence of the Casimir potential scaling function at criticality.

arXiv:1701.08722•Journal of Physics A Mathematical and Theoretical•Apr 5, 2017•21 citations

Shape-dependent finite-size effect of the critical two-dimensional Ising model on a triangular lattice

Xintian Wu, N. Sh. Izmailian, Wenan Guo

Using a bond-propagation algorithm, we study the finite-size behavior of the critical two-dimensional Ising model on a finite triangular lattice with free boundaries in five shapes: triangular, rhomboid, trapezoid, hexagonal, and rectangular. The critical free energy, internal energy, and specific heat are calculated. The accuracy of the free energy reaches 10(-26). Based on accurate data on several finite systems with linear size up to N=2000, we extract the bulk, surface, and corner parts of the free energy, internal energy, and specific heat accurately. We confirm the conformal field theory prediction that the corner free energy is universal and find logarithmic corrections in higher-order terms in the critical free energy for the rhomboid, trapezoid, and hexagonal systems, which are absent for the triangular and rectangular systems. The logarithmic edge corrections due to edges parallel or perpendicular to the bond directions in the internal energy are found to be identical, while the logarithmic edge corrections due to corresponding edges in the specific heat are different. The corner internal energy and corner specific heat for angles π/3, π/2, and 2π/3 are obtained, as well as higher-order corrections. Comparing with the corner internal energy and corner specific heat we previously found on a rectangle of the square lattice [Phys. Rev. E 86, 041149 (2012)], we conclude that the corner internal energy and corner specific heat for the rectangular shape are not universal.

arXiv:1212.2023•Physical Review E•Feb 19, 2013•27 citations

We obtain long series expansions for the bulk, surface and corner free energies for several two-dimensional statistical models, by combining Enting's finite lattice method (FLM) with exact transfer matrix enumerations. The models encompass all integrable curves of the Q -state Potts model on the square and triangular lattices, including the antiferromagnetic transition curves and the Ising model ( Q = 2) at temperature T , as well as a fully packed O( n ) type loop model on the square lattice. The expansions are around the trivial fixed points at infinite Q , n or 1/ T . By using a carefully chosen expansion parameter, q ≪ 1, all expansions turn out to be of the form , where the coefficients α k and β k are periodic functions of k . Thanks to this periodicity property, we can conjecture the form of the expansions to all orders (except in a few cases where the periodicity is too large). These expressions are then valid for all 0 ⩽ q < 1. We analyse in detail the q → 1 − limit in which the models become critical. In this limit the divergence of the corner free energy defines a universal term which can be compared with the conformal field theory (CFT) predictions of Cardy and Peschel. This allows us to deduce the asymptotic expressions for the correlation length in several cases. Finally we work out the FLM formulae for the case where some of the system's boundaries are endowed with particular (non-free) boundary conditions. We apply this in particular to the square-lattice Potts model with Jacobsen–Saleur boundary conditions, conjecturing the expansions of the surface and corner free energies to arbitrary order for any integer value of the boundary interaction parameter r . These results are in turn compared with CFT predictions.

We consider the anisotropic Ising model on the triangular lattice with finite boundaries, and use Kaufman's spinor method to calculate low-temperature series expansions for the partition function to high order. From these we can obtain 108-term series expansions for the bulk, surface and corner free energies. We extrapolate these to all terms and thereby conjecture the exact results for each. Our results agree with the exactly known bulk free energy. For the isotropic case, they also agree with Vernier and Jacobsen's conjecture for the

60^{\circ}

corners, and with Cardy and Peschel's conformal invariance predictions for the dominant behaviour at criticality.

We consider the anisotropic Ising model on the triangular lattice with finite boundaries, and use Kaufman’s spinor method to calculate low-temperature series expansions for the partition function to high order. From these, we can obtain 108-term series expansions for the bulk, surface and corner free energies. We extrapolate these to all terms and thereby conjecture the exact results for each. Our results agree with the exactly known bulk-free energy and with Cardy and Peschel’s conformal invariance predictions for the dominant behaviour at criticality. For the isotropic case, they also agree with Vernier and Jacobsen’s conjecture for the 60 ° corners.

The finite lattice method is used to derive low-temperature series expansions for surface magnetisations for the 3-state Potts model on the square lattice, for both fixed and free boundary conditions. Combinatorial weights required for surface corrections to the free energy have been generalised to include cases with explicit surface interactions. Analysis of series for the surface correction to the bulk magnetisation is consistent with the generic scaling prediction, assuming a slow convergence comparable to that found in analysis of Potts model series for bulk properties. For free boundaries, analysis of the ordering of the surface layer confirms the specific Potts model result derived from conformal invariance.

The critical two-dimensional Ising model is studied with four types boundary conditions: free, fixed ferromagnetic, fixed antiferromagnetic, and fixed double antiferromagnetic. Using bond propagation algorithms with surface fields, we obtain the free energy, internal energy, and specific heat numerically on square lattices with a square shape and various combinations of the four types of boundary conditions. The calculations are carried out on the square lattices with size N×N and 30<N<1000. The numerical data are analyzed with finite-size scaling. The bulk, edge, and corner terms are extracted very accurately. The exact results are conjectured for the corner logarithmic term in the free energy, the edge logarithmic term in the internal energy, and the corner logarithmic term in the specific heat. The corner logarithmic terms in the free energy agree with the conformal field theory very well.

Abstract Based on the results published recently (Hucht 2017 J. Phys. A: Math. Theor . 50 065201), the universal finite-size contributions to the free energy of the square lattice Ising model on the L × M rectangle, with open boundary conditions in both directions, are calculated exactly in the finite-size scaling limit L , M → ∞ , T → T c , with fixed temperature scaling variable x ∝ ( T / T c − 1 ) M and fixed aspect ratio ρ ∝ L / M . We derive exponentially fast converging series for the related Casimir potential and Casimir force scaling functions. At the critical point T = T c we confirm predictions from conformal field theory (Cardy and Peschel 1988 Nucl. Phys . B 300 377, Kleban and Vassileva 1991 J. Phys. A: Math. Gen . 24 3407). The presence of corners and the related corner free energy has dramatic impact on the Casimir scaling functions and leads to a logarithmic divergence of the Casimir potential scaling function at criticality.

Using a bond-propagation algorithm, we study the finite-size behavior of the critical two-dimensional Ising model on a finite triangular lattice with free boundaries in five shapes: triangular, rhomboid, trapezoid, hexagonal, and rectangular. The critical free energy, internal energy, and specific heat are calculated. The accuracy of the free energy reaches 10(-26). Based on accurate data on several finite systems with linear size up to N=2000, we extract the bulk, surface, and corner parts of the free energy, internal energy, and specific heat accurately. We confirm the conformal field theory prediction that the corner free energy is universal and find logarithmic corrections in higher-order terms in the critical free energy for the rhomboid, trapezoid, and hexagonal systems, which are absent for the triangular and rectangular systems. The logarithmic edge corrections due to edges parallel or perpendicular to the bond directions in the internal energy are found to be identical, while the logarithmic edge corrections due to corresponding edges in the specific heat are different. The corner internal energy and corner specific heat for angles π/3, π/2, and 2π/3 are obtained, as well as higher-order corrections. Comparing with the corner internal energy and corner specific heat we previously found on a rectangle of the square lattice [Phys. Rev. E 86, 041149 (2012)], we conclude that the corner internal energy and corner specific heat for the rectangular shape are not universal.