We present and analyze protocols for fault-tolerant quantum computing using color codes. We present circuit-level schemes for extracting the error syndrome of these codes fault-tolerantly. We further present an integer-program-based decoding algorithm for identifying the most likely error given the syndrome. We simulated our syndrome extraction and decoding algorithms against three physically-motivated noise models using Monte Carlo methods, and used the simulations to estimate the corresponding accuracy thresholds for fault-tolerant quantum error correction. We also used a self-avoiding walk analysis to lower-bound the accuracy threshold for two of these noise models. We present and analyze two architectures for fault-tolerantly computing with these codes: one with 2D arrays of qubits are stacked atop each other and one in a single 2D substrate. Our analysis demonstrates that color codes perform slightly better than Kitaev's surface codes when circuit details are ignored. When these details are considered, we estimate that color codes achieve a threshold of 0.082(3)%, which is higher than the threshold of $1.3 \times 10^{-5}$ achieved by concatenated coding schemes restricted to nearest-neighbor gates in two dimensions but lower than the threshold of 0.75% to 1.1% reported for the Kitaev codes subject to the same restrictions. Finally, because the behavior of our decoder's performance for two of the noise models we consider maps onto an order-disorder phase transition in the three-body random-bond Ising model in 2D and the corresponding random-plaquette gauge model in 3D, our results also answer the Nishimori conjecture for these models in the negative: the statistical-mechanical classical spin systems associated to the 4.8.8 color codes are counterintuitively more ordered at positive temperature than at zero temperature.
We present and analyze protocols for fault-tolerant quantum computing using color codes. We present circuit-level schemes for extracting the error syndrome of these codes fault-tolerantly. We further present an integer-program-based decoding algorithm for identifying the most likely error given the syndrome. We simulated our syndrome extraction and decoding algorithms against three physically-motivated noise models using Monte Carlo methods, and used the simulations to estimate the corresponding accuracy thresholds for fault-tolerant quantum error correction. We also used a self-avoiding walk analysis to lower-bound the accuracy threshold for two of these noise models. We present and analyze two architectures for fault-tolerantly computing with these codes: one with 2D arrays of qubits are stacked atop each other and one in a single 2D substrate. Our analysis demonstrates that color codes perform slightly better than Kitaev's surface codes when circuit details are ignored. When these details are considered, we estimate that color codes achieve a threshold of 0.082(3)%, which is higher than the threshold of 1.3×10−5 achieved by concatenated coding schemes restricted to nearest-neighbor gates in two dimensions but lower than the threshold of 0.75% to 1.1% reported for the Kitaev codes subject to the same restrictions. Finally, because the behavior of our decoder's performance for two of the noise models we consider maps onto an order-disorder phase transition in the three-body random-bond Ising model in 2D and the corresponding random-plaquette gauge model in 3D, our results also answer the Nishimori conjecture for these models in the negative: the statistical-mechanical classical spin systems associated to the 4.8.8 color codes are counterintuitively more ordered at positive temperature than at zero temperature.
Topological color codes defined by the 4.8.8 semiregular lattice feature geometrically local check operators and admit transversal implementation of the entire Clifford group, making them promising candidates for fault-tolerant quantum computation. Recently, several efficient algorithms for decoding the syndrome of color codes were proposed. Here, we modify one of these algorithms to account for errors affecting the syndrome, applying it to the family of triangular 4.8.8 color codes encoding one logical qubit. For a three-dimensional bit-flip channel, we report a threshold error rate of 0.0208(1), compared with 0.0305(4) previously reported for an integer-program-based decoding algorithm. When we account for circuit details, this threshold is reduced to 0.00143(1) per gate, compared with 0.00672(1) per gate for the surface code under an identical noise model.
We study the error threshold of color codes, a class of topological quantum codes that allow a direct implementation of quantum Clifford gates suitable for entanglement distillation, teleportation, and fault-tolerant quantum computation. We map the error-correction process onto a statistical mechanical random three-body Ising model and study its phase diagram via Monte Carlo simulations. The obtained error threshold of p(c) = 0.109(2) is very close to that of Kitaev's toric code, showing that enhanced computational capabilities do not necessarily imply lower resistance to noise.
Practical large-scale quantum computation requires both efficient error correction and robust implementation of logical operations. Three-dimensional (3D) color codes are a promising candidate for fault-tolerant quantum computation due to their transversal non-Clifford gates, but efficient decoding remains challenging. In this work, we extend previous decoders for two-dimensional color codes [1], which are based on the restriction of the decoding problem to a subset of the qubit lattice, to three dimensions. Including boundaries of 3D color codes, we demonstrate that the 3D restriction decoder achieves optimal scaling of the logical error rate and a threshold value of 1.55(6)% for code-capacity bit- and phase-flip noise, which is almost a factor of two higher than previously reported for this family of codes [2, 3]. We furthermore present qCodePlot3D, a Python package for visualizing 2D and 3D color codes, error configurations, and decoding paths, which supports the development and analysis of such decoders. These advancements contribute to making 3D color codes a more practical option for exploring fault-tolerant quantum computation.
Two-dimensional color codes are a promising candidate for fault-tolerant quantum computing, as they have high encoding rates, transversal implementation of logical Clifford gates, and resource-efficient magic state preparation schemes. However, decoding color codes presents a significant challenge due to their structure, where elementary errors violate three checks instead of just two (a key feature in surface code decoding), and the complexity of extracting syndrome is greater. We introduce an efficient color-code decoder that tackles these issues by combining two matching decoders for each color, generalized to handle circuit-level noise by employing detector error models. We provide comprehensive analyses of the decoder, covering its threshold and sub-threshold scaling both for bit-flip noise with ideal measurements and for circuit-level noise. Our simulations reveal that this decoding strategy nearly reaches the best possible scaling of logical failure ( pfail∼pd/2 ) for both noise models, where p is the noise strength, in the regime of interest for fault-tolerant quantum computing. While its noise thresholds are comparable with other matching-based decoders for color codes ( 8.2% for bit-flip noise and 0.46% for circuit-level noise), the scaling of logical failure rates below threshold significantly outperforms the best matching-based decoders.
Three-dimensional (3D) color codes have advantages for fault-tolerant quantum computing, such as protected quantum gates with relatively low overhead and robustness against imperfect measurement of error syndromes. Here we investigate the storage threshold error rates for bit-flip and phase-flip noise in the 3D color code (3DCC) on the body-centered cubic lattice, assuming perfect syndrome measurements. In particular, by exploiting a connection between error correction and statistical mechanics, we estimate the threshold for 1D stringlike and 2D sheetlike logical operators to be p_{3DCC}^{(1)}≃1.9% and p_{3DCC}^{(2)}≃27.6%. We obtain these results by using parallel tempering Monte Carlo simulations to study the disorder-temperature phase diagrams of two new 3D statistical-mechanical models: the four- and six-body random coupling Ising models.
Color codes are promising quantum error-correction (QEC) codes because they have an advantage over surface codes in that all Clifford gates can be implemented transversally. However, the thresholds of color codes under circuit-level noise are relatively low, mainly because measurements of their high-weight stabilizer generators cause an increase in the circuit depth and, thus, substantial errors are introduced. This makes color codes not the best candidate for fault-tolerant quantum computing. Here, we propose a method to suppress the impact of such errors by optimizing weights of decoders using conditional error probabilities conditioned on the measurement outcomes of flag qubits. In numerical simulations, we improve the threshold of the (4.8.8) color code under circuit-level noise from 0.14% to around 0.27%, which is calculated by using an integer programming decoder. Furthermore, in the (6.6.6) color code, we achieve a circuit-level threshold of around 0.36%, which is almost the same value as the highest value in the previous studies employing the same noise model. In both cases, the effective code distance is also improved compared to a conventional method that uses a single ancilla qubit for each stabilizer measurement. Thereby, the achieved logical error rates at low physical error rates are almost one order of magnitude lower than those of the conventional method with the same code distance. Even when compared to the single-ancilla method with a higher code distance, considering the increased number of qubits used in our method, we achieve lower logical error rates in most cases. This method can also be applied to other weight-based decoders, making the color codes more promising as candidates for the experimental implementation of QEC. Furthermore, one can utilize this approach to improve a threshold of wider classes of QEC codes, such as high-rate quantum low-density parity-check codes. Published by the American Physical Society 2024