Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1106.2190 · Quantum Information and Computation

Fault-tolerant ancilla preparation and noise threshold lower bounds for the 23-qubit Golay code

Adam Paetznick, Ben W. Reichardt

Published Nov 1, 2012• 47 citations
arXivHTMLPDF

Abstract

In fault-tolerant quantum computing schemes, the overhead is often dominated by the cost of preparing codewords reliably. This cost generally increases quadratically with the block size of the underlying quantum error-correcting code. In consequence, large codes that are otherwise very efficient have found limited fault-tolerance applications. Fault-tolerant preparation circuits therefore are an important target for optimization. We study the Golay code, a $23$-qubit quantum error-correcting code that protects the logical qubit to a distance of seven. In simulations, even using a na{\"i}ve ancilla preparation procedure, the Golay code is competitive with other codes both in terms of overhead and the tolerable noise threshold. We provide two simplified circuits for fault-tolerant preparation of Golay code-encoded ancillas. The new circuits minimize error propagation, reducing the overhead by roughly a factor of four compared to standard encoding circuits. By adapting the malignant set counting technique to depolarizing noise, we further prove a threshold above $\threshOverlap$ noise per gate.

DOI
10.26421/qic12.11-12-10

Related papers

Resource optimization for fault-tolerant quantum computing

Adam Paetznick

In this thesis we examine a variety of techniques for reducing the resources required for fault-tolerant quantum computation. First, we show how to simplify universal encoded computation by using only transversal gates and standard error correction procedures, circumventing existing no-go theorems. We then show how to simplify ancilla preparation, reducing the cost of error correction by more than a factor of four. Using this optimized ancilla preparation, we develop improved techniques for proving rigorous lower bounds on the noise threshold. Additional overhead can be incurred because quantum algorithms must be translated into sequences of gates that are actually available in the quantum computer. In particular, arbitrary single-qubit rotations must be decomposed into a discrete set of fault-tolerant gates. We find that by using a special class of non-deterministic circuits, the cost of decomposition can be reduced by as much as a factor of four over state-of-the-art techniques, which typically use deterministic circuits. Finally, we examine global optimization of fault-tolerant quantum circuits under physical connectivity constraints. We adapt techniques from VLSI in order to minimize time and space usage for computations in the surface code, and we develop a software prototype to demonstrate the potential savings.

arXiv:1410.5124•Oct 19, 2014•4 citations

Lower overhead fault-tolerant building blocks for noisy quantum computers

Prithviraj Prabhu

Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit. We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.

quant-pharXiv:2605.12385•May 13, 2026•0 citations

Efficient Fault-Tolerant Ancilla Preparation for Quantum BCH codes via Cyclic Symmetry

Kohei Yamamoto, Keisuke Fujii

One of the major challenges in realizing fault-tolerant quantum computers (FTQCs) is the requirement for a large number of physical qubits. To address this issue, high-rate quantum error correcting codes, which efficiently embed logical qubits into physical qubits, have recently attracted considerable attention. Among such codes, quantum BCH codes, which offer both high rates and large code distances, are promising yet underexplored candidates. However, no fault-tolerant ancilla preparation method specialized for this class had been established. We employ a two-stage approach (non-fault-tolerant preparation + entanglement distillation) for ancilla preparation. We then propose a framework for designing low-overhead distillation method that strategically leverages the cyclic symmetry of quantum BCH codes to determine which non-fault-tolerant circuits can successfully produce a fault-tolerant state. Numerical simulations on several high-performance quantum BCH codes up to 127 qubits demonstrate that our method achieves lower spatial overhead and logical error rates than conventional distillation circuits. Furthermore, we evaluated the logical error rates under a circuit-level noise model, and obtained performance benchmarks in realistic settings. This efficient state preparation technique is expected to contribute to the early realization of practical FTQCs, particularly on highly connected quantum platforms such as neutral atom systems.

quant-pharXiv:2605.19471•May 20, 2026•0 citations

Efficient preparation of large-block-code ancilla states for fault-tolerant quantum computation

Yi-Cong Zheng, Ching–Yi Lai, Todd A. Brun

Fault-tolerant quantum computation (FTQC) schemes that use multiqubit large block codes can potentially reduce the resource overhead to a great extent. A major obstacle is the requirement for a large number of clean ancilla states of different types without correlated errors inside each block. These ancilla states are usually logical stabilizer states of the data-code blocks, which are generally difficult to prepare if the code size is large. Previously, we have proposed an ancilla distillation protocol for Calderbank-Shor-Steane (CSS) codes by classical error-correcting codes. It was assumed that the quantum gates in the distillation circuit were perfect; however, in reality, noisy quantum gates may introduce correlated errors that are not treatable by the protocol. In this paper, we show that additional postselection by another classical error-detecting code can be applied to remove almost all correlated errors. Consequently, the revised protocol is fully fault tolerant and capable of preparing a large set of stabilizer states sufficient for FTQC using large block codes. At the same time, the yield rate can be boosted from $O({t}^{\ensuremath{-}2})$ to $O(1)$ in practice for an $[[n,k,d=2t+1]]$ CSS code. Ancilla preparation for the [[23,1,7]] quantum Golay code is numerically studied in detail through Monte Carlo simulation. The results support the validity of the protocol when the gate failure rate is reasonably low. To the best of our knowledge, this approach is one of the first attempts to prepare general large block stabilizer states free of correlated errors for FTQC in a fault-tolerant and efficient manner.

arXiv:1710.00389•Physical Review A•Mar 21, 2018•13 citations

Fault-Tolerant Quantum Error Correction: Implementing Hamming-Based Codes with Advanced Syndrome Extraction Techniques

Soham Bhadra, Diyansha Singh, Angana Chowdhury

Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane $[\![7,1,3]\!]$ code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors - a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4$\times$ compared to standard approaches. Our implementations achieve logical error rates as low as $5.1 \times 10^{-5}$ under realistic noise conditions with physical error rates of $10^{-3}$, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.

quant-pharXiv:2601.07860•Jan 13, 2026•0 citations

Synthesis of Fault-tolerant State Preparation Circuits using Steane-type Error Detection

Erik Weilandt, Tom Peham, Robert Wille

Fault-tolerant state preparation is essential for reliable quantum error correction, particularly in Steane-type error correction, which relies on robust ancilla states for syndrome readout. One method of fault-tolerant state preparation is to initialize multiple ancilla states and check them against each other to detect problematic errors. In the worst case, the number of states required for successful initialization grows polynomially with the code distance, but it has been shown that this can be reduced to constant ancilla overhead-in the best case, only four states are required. However, existing techniques for finding low-overhead initialization schemes are limited to codes with large symmetry groups, such as the Golay code. In this work, we propose a general, automated synthesis methodology for Steane-type fault-tolerant state preparation circuits that applies to arbitrary Calderbank-Shor-Steane (CSS) codes and does not rely on code symmetries. We apply the proposed methods to various CSS codes up to a distance of seven and simulate the successful fault-tolerant initialization of logical basis states under circuit-level depolarizing noise. The circuits synthesized using the proposed methodology provide an important step towards experimental realizations of high-fidelity ancilla states for near-term demonstration of fault-tolerant quantum computation.

quant-pharXiv:2601.13313•Jan 21, 2026•0 citations
In fault-tolerant quantum computing schemes, the overhead is often dominated by the cost of preparing codewords reliably. This cost generally increases quadratically with the block size of the underlying quantum error-correcting code. In consequence, large codes that are otherwise very efficient have found limited fault-tolerance applications. Fault-tolerant preparation circuits therefore are an important target for optimization. We study the Golay code, a 232323-qubit quantum error-correcting code that protects the logical qubit to a distance of seven. In simulations, even using a na{"i}ve ancilla preparation procedure, the Golay code is competitive with other codes both in terms of overhead and the tolerable noise threshold. We provide two simplified circuits for fault-tolerant preparation of Golay code-encoded ancillas. The new circuits minimize error propagation, reducing the overhead by roughly a factor of four compared to standard encoding circuits. By adapting the malignant set counting technique to depolarizing noise, we further prove a threshold above \threshOverlap\threshOverlap\threshOverlap noise per gate.
In this thesis we examine a variety of techniques for reducing the resources required for fault-tolerant quantum computation. First, we show how to simplify universal encoded computation by using only transversal gates and standard error correction procedures, circumventing existing no-go theorems. We then show how to simplify ancilla preparation, reducing the cost of error correction by more than a factor of four. Using this optimized ancilla preparation, we develop improved techniques for proving rigorous lower bounds on the noise threshold. Additional overhead can be incurred because quantum algorithms must be translated into sequences of gates that are actually available in the quantum computer. In particular, arbitrary single-qubit rotations must be decomposed into a discrete set of fault-tolerant gates. We find that by using a special class of non-deterministic circuits, the cost of decomposition can be reduced by as much as a factor of four over state-of-the-art techniques, which typically use deterministic circuits. Finally, we examine global optimization of fault-tolerant quantum circuits under physical connectivity constraints. We adapt techniques from VLSI in order to minimize time and space usage for computations in the surface code, and we develop a software prototype to demonstrate the potential savings.
Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit. We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.
One of the major challenges in realizing fault-tolerant quantum computers (FTQCs) is the requirement for a large number of physical qubits. To address this issue, high-rate quantum error correcting codes, which efficiently embed logical qubits into physical qubits, have recently attracted considerable attention. Among such codes, quantum BCH codes, which offer both high rates and large code distances, are promising yet underexplored candidates. However, no fault-tolerant ancilla preparation method specialized for this class had been established. We employ a two-stage approach (non-fault-tolerant preparation + entanglement distillation) for ancilla preparation. We then propose a framework for designing low-overhead distillation method that strategically leverages the cyclic symmetry of quantum BCH codes to determine which non-fault-tolerant circuits can successfully produce a fault-tolerant state. Numerical simulations on several high-performance quantum BCH codes up to 127 qubits demonstrate that our method achieves lower spatial overhead and logical error rates than conventional distillation circuits. Furthermore, we evaluated the logical error rates under a circuit-level noise model, and obtained performance benchmarks in realistic settings. This efficient state preparation technique is expected to contribute to the early realization of practical FTQCs, particularly on highly connected quantum platforms such as neutral atom systems.
Fault-tolerant quantum computation (FTQC) schemes that use multiqubit large block codes can potentially reduce the resource overhead to a great extent. A major obstacle is the requirement for a large number of clean ancilla states of different types without correlated errors inside each block. These ancilla states are usually logical stabilizer states of the data-code blocks, which are generally difficult to prepare if the code size is large. Previously, we have proposed an ancilla distillation protocol for Calderbank-Shor-Steane (CSS) codes by classical error-correcting codes. It was assumed that the quantum gates in the distillation circuit were perfect; however, in reality, noisy quantum gates may introduce correlated errors that are not treatable by the protocol. In this paper, we show that additional postselection by another classical error-detecting code can be applied to remove almost all correlated errors. Consequently, the revised protocol is fully fault tolerant and capable of preparing a large set of stabilizer states sufficient for FTQC using large block codes. At the same time, the yield rate can be boosted from $O({t}^{\ensuremath{-}2})$ to O(1)O(1)O(1) in practice for an [[n,k,d=2t+1]][[n,k,d=2t+1]][[n,k,d=2t+1]] CSS code. Ancilla preparation for the [[23,1,7]] quantum Golay code is numerically studied in detail through Monte Carlo simulation. The results support the validity of the protocol when the gate failure rate is reasonably low. To the best of our knowledge, this approach is one of the first attempts to prepare general large block stabilizer states free of correlated errors for FTQC in a fault-tolerant and efficient manner.
Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [ ⁣[7,1,3] ⁣][\![7,1,3]\!][[7,1,3]] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors - a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4×\times× compared to standard approaches. Our implementations achieve logical error rates as low as 5.1×10−55.1 \times 10^{-5}5.1×10−5 under realistic noise conditions with physical error rates of 10−310^{-3}10−3, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.
Fault-tolerant state preparation is essential for reliable quantum error correction, particularly in Steane-type error correction, which relies on robust ancilla states for syndrome readout. One method of fault-tolerant state preparation is to initialize multiple ancilla states and check them against each other to detect problematic errors. In the worst case, the number of states required for successful initialization grows polynomially with the code distance, but it has been shown that this can be reduced to constant ancilla overhead-in the best case, only four states are required. However, existing techniques for finding low-overhead initialization schemes are limited to codes with large symmetry groups, such as the Golay code. In this work, we propose a general, automated synthesis methodology for Steane-type fault-tolerant state preparation circuits that applies to arbitrary Calderbank-Shor-Steane (CSS) codes and does not rely on code symmetries. We apply the proposed methods to various CSS codes up to a distance of seven and simulate the successful fault-tolerant initialization of logical basis states under circuit-level depolarizing noise. The circuits synthesized using the proposed methodology provide an important step towards experimental realizations of high-fidelity ancilla states for near-term demonstration of fault-tolerant quantum computation.