Observation of High Coherence in Josephson Junction Qubits Measured in a Three-Dimensional Circuit QED Architecture
Hanhee Paik, David Schuster, Lev S. Bishop, Gerhard Kirchmair, Gianluigi Catelani, Adam Sears, Blake Johnson, Matthew J. Reagor, Luigi Frunzio, L. I. Glazman, S. M. Girvin, Michel Devoret, Robert J. Schoelkopf
Superconducting quantum circuits based on Josephson junctions have made rapid progress in demonstrating quantum behavior and scalability. However, the future prospects ultimately depend upon the intrinsic coherence of Josephson junctions, and whether superconducting qubits can be adequately isolated from their environment. We introduce a new architecture for superconducting quantum circuits employing a three-dimensional resonator that suppresses qubit decoherence while maintaining sufficient coupling to the control signal. With the new architecture, we demonstrate that Josephson junction qubits are highly coherent, with T2 ∼ 10 to 20 μs without the use of spin echo, and highly stable, showing no evidence for 1/f critical current noise. These results suggest that the overall quality of Josephson junctions in these qubits will allow error rates of a few 10(-4), approaching the error correction threshold.
Superconducting quantum circuits based on Josephson junctions have made rapid progress in demonstrating quantum behavior and scalability. However, the future prospects ultimately depend upon the intrinsic coherence of Josephson junctions, and whether superconducting qubits can be adequately isolated from their environment. We introduce a new architecture for superconducting quantum circuits employing a three-dimensional resonator that suppresses qubit decoherence while maintaining sufficient coupling to the control signal. With the new architecture, we demonstrate that Josephson junction qubits are highly coherent, with T2 ∼ 10 to 20 μs without the use of spin echo, and highly stable, showing no evidence for 1/f critical current noise. These results suggest that the overall quality of Josephson junctions in these qubits will allow error rates of a few 10(-4), approaching the error correction threshold.
Superconducting quantum circuits based on Josephson junctions have made rapid progress in demonstrating quantum behavior and scalability.However, the future prospects ultimately depend upon the intrinsic coherence of Josephson junctions, and whether superconducting qubits can be adequately isolated from their environment.We introduce a new architecture for superconducting quantum circuits employing a three-dimensional resonator that suppresses qubit decoherence while maintaining sufficient coupling to the control signal.With the new architecture, we demonstrate that Josephson junction qubits are highly coherent, with T 2 $ 10 to 20 s without the use of spin echo, and highly stable, showing no evidence for 1=f critical current noise.These results suggest that the overall quality of Josephson junctions in these qubits will allow error rates of a few 10 À4 , approaching the error correction threshold.
Significant advances in coherence render superconducting quantum circuits a viable platform for fault-tolerant quantum computing. To further extend capabilities, highly coherent quantum systems could act as quantum memories for these circuits. A useful quantum memory must be rapidly addressable by Josephson-junction-based artificial atoms, while maintaining superior coherence. We demonstrate a superconducting microwave cavity architecture that is highly robust against major sources of loss that are encountered in the engineering of circuit QED systems. The architecture allows for storage of quantum superpositions in a resonator on the millisecond scale, while strong coupling between the resonator and a transmon qubit enables control, encoding, and readout at MHz rates. This extends the maximum available coherence time attainable in superconducting circuits by almost an order of magnitude compared to earlier hardware. Our design is an ideal platform for studying coherent quantum optics and marks an important step towards hardware-efficient quantum computing in Josephson-junction-based quantum circuits.
Superconducting qubits are Josephson junction-based circuits that exhibit macroscopic quantum behavior and can be manipulated as artificial atoms. Benefiting from the well-developed technology of microfabrication and microwave engineering, superconducting qubits have great advantages in design flexibility, controllability, and scalability. Over the past decade, there has been rapid progress in the field, which greatly improved our understanding of qubit decoherence and circuit optimization. The single-qubit coherence time has been steadily raised to the order of 10 to 100 μs, allowing for the demonstration of high-fidelity gate operations and measurement-based feedback control. Here we review recent progress in the coherence and readout of superconducting qubits.
We fabricate a three-Josephson-junction flux qubit, a nonlinear superconducting circuit acting as a quantum two-level system with a macroscopic degree of freedom. First, the capacitance per unit area of the used Josephson junctions, C s =(100±25)fF/µm 2 ,
is determined from DC SQUID voltage steps. Next, we probe the coherence times of our qubit using a novel variant of the switching-DC-SQUID readout. At the optimal point, our device is relaxation-limited with T 1 ≅100ns and T φ ≅2µs. Ramsey
and spin echo experiments reveal 1/f-noise and suggest microscopic fluctuators in the tunnel barriers as its source. As in other experiments, the 1/f-noise magnitude is ≅(10 -6 Φ 0 ) 2 . Finally, the qubit is coupled to a linear
LC-resonator in a circuit quantum electrodynamics experiment. Spectroscopically, an upconversion mechanism enabled by controlled symmetry breaking is demonstrated.
Superconducting qubits are a leading platform for quantum computation, yet decoherence and scalability challenges continue to limit progress toward fault-tolerant systems. This review synthesizes research on architectures, noise sources, and error correction to clarify performance trade-offs and guide development. The transition from Transmon to Fluxonium has dramatically improved qubit performance, achieving millisecond-scale coherence times. However, this success reveals a fundamental limit of coherence now being primarily restricted by the physical properties of the materials, specifically dielectric losses occurring at the Josephson junction leads and within the surrounding materials. As overcoming these material limits becomes increasingly difficult, system-level engineering determines whether high-coherence qubits can scale.Scaling quantum systems is difficult because current cooling and control systems create too much heat and this forces a shift to integrated digital superconducting circuits and cryogenic light-based links. While these hardware challenges restrict scaling, experiments in error correction show that logical qubits can already outperform physical ones. For example, a distance-7 surface code improved logical qubit lifetime by 2.4×. Achieving practical fault tolerance, however, requires moving beyond simple error models. Future systems must combine techniques like Dynamical Decoupling and Machine Learning-based Optimal Control with dynamic classical control capable of handling complex, correlated faults such as Multi-Bit Burst Errors. Progress in materials, cryogenic system integration for control, and adaptive error management must advance together to realize scalable, high-fidelity quantum hardware.
Quantum information processing using superconducting qubit based on Josephson junction has become one of the most promising candidates for possible realization of a quantum computer. In the heart of the qubit circuits, the superconducting microwave resonator plays a key role in quantum operations and measurements, which enables single-photon level microwave quantum optics. During last decade, the coherence time, or the lifetime of the quantum state, of the superconducting qubit has been dramatically improved. Among several technological innovations, the improvement of superconducting microwave resonator's quality has been the main driving force in getting the qubit performance almost ready for elementary quantum computing architecture. In this paper, I will briefly review very recent progresses of the superconducting microwave resonators especially aimed for quantum device applications during the last decade. The progresses have been driven by ingenious circuit design, material improvement, and new measurement techniques. Even a rather radical idea of three-dimensional large resonators have been successfully implemented in a qubit circuit. All those efforts contributed to our understanding of the qubit decoherence mechanism and as a result to the improvement of qubit performance.