Recently several more efficient versions of quantum state tomography have been proposed, with the purpose of making tomography feasible even for many-qubit states. The number of state parameters to be estimated is reduced by tentatively introducing certain simplifying assumptions on the form of the quantum state, and subsequently using the data to rigorously verify these assumptions. The simplifying assumptions considered so far were (i) the state can be well approximated to be of low rank, or (ii) the state can be well approximated as a matrix product state, or (iii) only the permutationally invariant part of the density matrix is determined. We add one more method in that same spirit: We allow in principle any model for the state, using any (small) number of parameters (which can, e.g., be chosen to have a clear physical meaning), and the data are used to verify the model. The proof that this method is valid cannot be as strict as in the above-mentioned cases, but is based on well-established statistical methods that go under the name of ``information criteria.'' We exploit here, in particular, the Akaike information criterion. We illustrate the method by simulating experiments on (noisy) Dicke states.
Recently several more efficient versions of quantum state tomography have been proposed, with the purpose of making tomography feasible even for many-qubit states. The number of state parameters to be estimated is reduced by tentatively introducing certain simplifying assumptions on the form of the quantum state, and subsequently using the data to rigorously verify these assumptions. The simplifying assumptions considered so far were (i) the state can be well approximated to be of low rank, or (ii) the state can be well approximated as a matrix product state, or (iii) only the permutationally invariant part of the density matrix is determined. We add one more method in that same spirit: We allow in principle any model for the state, using any (small) number of parameters (which can, e.g., be chosen to have a clear physical meaning), and the data are used to verify the model. The proof that this method is valid cannot be as strict as in the above-mentioned cases, but is based on well-established statistical methods that go under the name of ``information criteria.'' We exploit here, in particular, the Akaike information criterion. We illustrate the method by simulating experiments on (noisy) Dicke states.
Abstract Quantum state estimation (or state tomography) is an indispensable task in quantum information processing. Because full state tomography that determines all elements of the density matrix is computationally demanding, one usually takes the strategy of assuming a certain model of quantum states and identifying the model parameters. However, it is difficult to make a valid assumption given little prior knowledge on a quantum state of interest, and thus we need a reasonable model selection method for quantum state estimation. Actually, in the classical statistical estimation theory, several types of information criteria have been established and widely used in practice for appropriately choosing a classical statistical model. In this study, we propose quantum information criteria for evaluating the quality of the estimated quantum state in terms of the quantum relative entropy, which is a natural quantum analogue of the classical information criterion defined in terms of Kullback–Leibler divergence. In particular, we derive two quantum information criteria depending on the type of an estimator for the quantum relative entropy; one uses the log-likelihood and the other uses the classical shadow. The general role of information criteria is to predict the performance of an estimated model for unseen data, although it is a function of only sampled data; this generalization capability of the proposed quantum information criteria is evaluated in numerical simulations.
The statistical analysis of measurement data has become a key component of many quantum engineering experiments. As standard full state tomography becomes unfeasible for large dimensional quantum systems, one needs to exploit prior information and the 'sparsity' properties of the experimental state in order to reduce the dimensionality of the estimation problem. In this paper we propose model selection as a general principle for finding the simplest, or most parsimonious explanation of the data, by fitting different models and choosing the estimator with the best trade-off between likelihood fit and model complexity. We apply two well established model selection methods—the Akaike information criterion (AIC) and the Bayesian information criterion (BIC)—two models consisting of states of fixed rank and datasets such as are currently produced in multiple ions experiments. We test the performance of AIC and BIC on randomly chosen low rank states of four ions, and study the dependence of the selected rank with the number of measurement repetitions for one ion states. We then apply the methods to real data from a four ions experiment aimed at creating a Smolin state of rank 4. By applying the two methods together with the Pearson χ 2 test we conclude that the data can be suitably described with a model whose rank is between 7 and 9. Additionally we find that the mean square error of the maximum likelihood estimator for pure states is close to that of the optimal over all possible measurements.
In quantum information transformation and quantum computation, the most critical issues are security and accuracy. These features, therefore, stimulate research on quantum state characterization. A characterization tool, Quantum state tomography, reconstructs the density matrix of an unknown quantum state. Theoretically, reconstructing an unknown state using this method can be arbitrarily accurate. However, this is less practical owing to the huge burden of measurements and data processing for large numbers of qubits. Even comprising an efficient estimator and a precise algorithm, an optimal tomographic framework can also be overburdened owing to the exponential growth of the measurements. Moreover, the consequential postprocessing of huge amounts of data challenges the capacity of computers. Thus, it is crucial to build an efficient framework that requires fewer measurements but yields an expected accuracy. To this end, we built a tomography schema by which only a few Pauli measurements enable an accurate tomographic reconstruction. Subsequently, this schema was verified as efficient and accurate through numerical simulations on the tomography of multi-qubit quantum states. Furthermore, this schema was proven to be robust through numerical simulations on a noisy superconducting qubit system. Therefore, the tomography schema paves an alternatively effective way to reconstruct the density matrix of a quantum state owing to its efficiency and accuracy, which are essential for quantum state tomography.
In quantum information transformation and quantum computation, the most critical issues are security and accuracy. These features, therefore, stimulate research on quantum state characterization. A characterization tool, quantum state tomography, reconstructs the density matrix of an unknown quantum state. Theoretically, reconstructing an unknown state using this method can be arbitrarily accurate. However, this is not so practical owing to the huge burden of measurements and data processing for large numbers of qubits. Even comprising an efficient estimator and a precise algorithm, an optimal tomographic framework can also be overburdened owing to the exponential growth of the measurements. Moreover, the consequential postprocessing of huge amounts of data challenges the capacity of computers. Thus, it is crucial to build an efficient framework that requires fewer measurements but yields an expected accuracy. To this end, we built a tomography schema by which only a few Pauli measurements enable an accurate tomographic reconstruction. Subsequently, this schema was verified as efficient and accurate through numerical simulations on the tomography of multiqubit quantum states. Furthermore, it was proven to be robust through numerical simulations on a noisy superconducting qubit system. Therefore, the tomography schema paves an alternative effective way to reconstruct the density matrix of a quantum state owing to its efficiency and accuracy, which are essential for quantum state tomography.
The estimation of high dimensional quantum states is an important statistical problem arising in current quantum technology applications. A key example is the tomography of multiple ions states, employed in the validation of state preparation in ion trap experiments (Häffner et al 2005 Nature 438 643 ). Since full tomography becomes unfeasible even for a small number of ions, there is a need to investigate lower dimensional statistical models which capture prior information about the state, and to devise estimation methods tailored to such models. In this paper we propose several new methods aimed at the efficient estimation of low rank states and analyse their performance for multiple ions tomography. All methods consist in first computing the least squares estimator, followed by its truncation to an appropriately chosen smaller rank. The latter is done by setting eigenvalues below a certain 'noise level' to zero, while keeping the rest unchanged, or normalizing them appropriately. We show that (up to logarithmic factors in the space dimension) the mean square error of the resulting estimators scales as where r is the rank, is the dimension of the Hilbert space, and N is the number of quantum samples. Furthermore we establish a lower bound for the asymptotic minimax risk which shows that the above scaling is optimal. The performance of the estimators is analysed in an extensive simulations study, with emphasis on the dependence on the state rank, and the number of measurement repetitions. We find that all estimators perform significantly better than the least squares, with the 'physical estimator' (which is a bona fide density matrix) slightly outperforming the other estimators.
Quantum tomography requires repeated measurements of many copies of the physical system, all prepared by a source in the unknown state. In the limit of very many copies measured, the often-used maximum-likelihood (ML) method for converting the gathered data into an estimate of the state works very well. For smaller data sets, however, it often suffers from problems of rank deficiency in the estimated state. For many systems of relevance for quantum information processing, the preparation of a very large number of copies of the same quantum state is still a technological challenge, which motivates us to look for estimation strategies that perform well even when there is not much data. After reviewing the concept of minimax state estimation, we use minimax ideas to construct a simple estimator for quantum states. We demonstrate that, for the case of tomography of a single qubit, our estimator significantly outperforms the ML estimator for small number of copies of the state measured. Our estimator is always full-rank, and furthermore, has a natural dependence on the number of copies measured, which is missing in the ML estimator.