Quantum enhancements of precision in metrology can be compromised by system imperfections. These may be mitigated by appropriate optimization of the input state to render it robust, at the expense of making the state difficult to prepare. In this paper, we identify the major sources of imperfection of an optical sensor: input state preparation inefficiency, sensor losses, and detector inefficiency. The second of these has received much attention; we show that it is the least damaging to surpassing the standard quantum limit in a optical interferometric sensor. Further, we show that photonic states that can be prepared in the laboratory using feasible resources allow a measurement strategy using photon-number-resolving detectors that not only attain the Heisenberg limit for phase estimation in the absence of losses, but also deliver close to the maximum possible precision in realistic scenarios including losses and inefficiencies. In particular, we give bounds for the tradeoff between the three sources of imperfection that will allow true quantum-enhanced optical metrology
Quantum enhancements of precision in metrology can be compromised by system imperfections. These may be mitigated by appropriate optimization of the input state to render it robust, at the expense of making the state difficult to prepare. In this paper, we identify the major sources of imperfection of an optical sensor: input state preparation inefficiency, sensor losses, and detector inefficiency. The second of these has received much attention; we show that it is the least damaging to surpassing the standard quantum limit in a optical interferometric sensor. Further, we show that photonic states that can be prepared in the laboratory using feasible resources allow a measurement strategy using photon-number-resolving detectors that not only attain the Heisenberg limit for phase estimation in the absence of losses, but also deliver close to the maximum possible precision in realistic scenarios including losses and inefficiencies. In particular, we give bounds for the tradeoff between the three sources of imperfection that will allow true quantum-enhanced optical metrology
Abstract Quantum mechanics establishes the ultimate limit to the scaling of the precision on any parameter, by identifying optimal probe states and measurements. While this paradigm is, at least in principle, adequate for the metrology of quantum channels involving the estimation of phase and loss parameters, we show that estimating the loss parameters associated with a quantum channel and a realistic quantum detector are fundamentally different. While Fock states are provably optimal for the former, we identify a crossover in the nature of the optimal probe state for estimating detector imperfections as a function of the loss parameter using Fisher information as a benchmark. We provide theoretical results for on-off and homodyne detectors, the most widely used detectors in quantum photonics technologies, when using Fock states and coherent states as probes.
Optical phase measurement through its application in quantum metrology has pushed the precision limit with which some physical quantities can be measured accurately. At the very fundamental level, the laws of quantum mechanics dictate that the uncertainty in phase estimations scales as 1/N, where N is the number of quantum resources employed in the protocol [1]. This is the well known Heisenberg limit (HL) which is quadratically better than the traditional precision limit known as the standard quantum limit (SQL) with uncertainty asymptotically scaling as 1/sqrt{N} [1]. Several experiments have demonstrated that the SQL can be beaten by using an entangled state as the probe and a specific measurement scheme for ab initio estimation of unknown phases [2,3]. It has also been shown experimentally that even in the absence of the entanglement one can measure an unknown phase with imprecision scaling at the HL [4]. In this work we first present a new protocol able to estimate an optical phase at the Heisenberg limit, and then experimentally explore fundamental and practical issues in generating high-quality novel entangled states, for use in this protocol and beyond. Our aim in this study is to measure an unknown phase in the interval [0,2pi) with uncertainty attaining the exact HL. There is a condition that should be met to address this objective: preparation of an optimal state [5]. This would cover part of the presentation through which we explain how to experimentally realise such an optimal state with the current technological limitations and the feasibility of the scheme. In particular, we generate an entangled 3-photon (2-photon) state of specific superposition of GHZ (Bell) states. Our numerical simulation of the phase measurement gate together with the experimental outcomes show that the created state should have a high fidelity and purity to be able to have the phase uncertainty achieving the exact HL. Therefore, we briefly explain the modelling for experimental imperfections and finally present the results of experimental phase measurements.
Quantum metrology is an auspicious discipline of quantum information which is currently witnessing a surge of experimental breakthroughs and theoretical developments. The main goal of quantum metrology is to estimate unknown parameters as accurately as possible. By using quantum resources as probes, it is possible to attain a measurement precision that would be otherwise impossible using the best classical strategies. For example, with respect to the task of phase estimation, the maximum precision (the Heisenberg limit) is a quadratic gain in precision with respect to the best classical strategies. Of course, quantum metrology is not the sole quantum technology currently undergoing advances. The theme of this thesis is exploring how quantum metrology can be enhanced with other quantum techniques when appropriate, namely: graph states, error correction and cryptography.
While quantum metrology enables measurement precision beyond classical limits, its performance is often susceptible to experimental imperfections. Most prior studies have focused on imperfections in quantum states and operations. Here, we investigate the effect of coarse graining in quantum measurement through both theoretical analysis and experimental demonstration. Using an interferometer with a squeezed vacuum and a laser input, we analyze how coarse graining in homodyne detection affects the precision of phase estimation. We evaluate the Fisher information under various coarse-graining conditions and determine, in each case, an optimal estimation strategy that saturates the Cramér-Rao bound. Remarkably, even extremely coarse-grained measurement -- with only two bins -- enables phase estimation beyond the standard quantum limit and even achieves a precision that follows the Heisenberg scaling. We experimentally demonstrate quantum-enhanced phase estimation under coarse-grained homodyne detection. To determine an optimal estimation strategy, we employ the method of moments and present calibration procedures that enable its application to general experimental settings. Using only two bins, we observe a quantum enhancement of 1.2 dB compared to the classical method using the ideal measurement, improving towards 3.8 dB as the bin number increases. These results highlight a practical pathway to achieving quantum enhancement under the presence of severe experimental imperfections.
Cubic phase states provide the essential non-Gaussian resource for continuous-variable quantum computing. We show that they also offer significant potential for quantum metrology, surpassing the phase-sensing sensitivity of all Gaussian states at equal average photon number. Optimal sensitivity requires only moderate initial squeezing, and the non-Gaussian advantage remains robust against loss and detection noise. We identify optimal measurement strategies and show that several experimentally relevant preparation schemes surpass Gaussian limits, in some cases reaching the sensitivity of cubic phase states. Our results establish cubic phase states as a promising resource for quantum-enhanced precision measurements beyond Gaussian limits.
The insights offered by quantum mechanics to the field of optical metrology are many-fold, with non-classical states of light themselves used to make sensors that surpass the sensitivity of sensors using classical states of light. Unfortunately, this advantage, referred to often as "super-sensitivity" is notoriously fragile, and even the slightest experimental imperfections may greatly reduce the efficacy of the non-classical sensors, sometimes completely obviating their advantage. In my thesis I have shown that the performance of an otherwise ideal two-photon interferometer, which exploits entanglement between photons to make super-sensitive measurements of phase, is crippled by the slightest introduction of decoherence between modes of the interferometer. I have shown further that such drastic reduction in sensitivity can also appear in classical measurement problems, specifically that the recently developed methods of estimating the separation between a pair of point sources are rendered less effective when the ideal assumption of complete spatial incoherence is relaxed. Towards overcoming these and other issues, I have designed new configurations that use ancillary optical degrees of freedom, a tool-set that has recently garnered much interest in the field of quantum optics. In the context of two-photon interferometry, I have shown that by coupling polarization to the spatial-structure of the two photon state used to probe phase it is possible to obviate the need for a reference phase, even in the context of decoherence and imperfections in the interferometer. In the context of two-point resolution, I have developed an anisotropic imaging system that performs the function of an image-inversion interferometer and is inherently stable, offering an attractive implementation of recently developed methods of sub-Rayleigh imaging. I have further shown both theoretically and experimentally that the same anisotropic image-inversion interferometer is useful in measuring spatially encoded phases, both in the context of classical illumination as well as quantum-aided two-photon super-sensing. In both cases, the ability to perform interferometric measurements of the spatial structure of an electric field without splitting beam paths forms a bridge between conception and implementation of precision-sensing measurement strategies. Finally, I have shown that binary interferometric method based on the common-path anisotropic imaging system that I introduced, are able to measure both phase gradients and transverse beam tilts with a sensitivity beating conventional systems that are used both commercially and in research laboratories.