Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1005.3152 · Journal of the Optical Society of America B

Fiber-comb-stabilized light source at 556 nm for magneto-optical trapping of ytterbium

Masami Yasuda, Takuya Kohno, Hajime Inaba, Yoshiaki Nakajima, Kazumoto Hosaka, Atsushi Onae, Feng-Lei Hong

Published Jun 15, 2010• 24 citations
arXivHTMLPDF

Abstract

A frequency-stabilized light source emitting at 556 nm is realized by frequency doubling a 1112 nm laser, which is phase locked to a fiber-based optical frequency comb. The 1112 nm laser is either an ytterbium (Yb)-doped distributed feedback fiber laser or a master-slave laser system that uses an external cavity diode laser as a master laser. We have achieved the continuous frequency stabilization of the light source over a 5 day period. With the light source, we have completed the second-stage magneto-optical trapping (MOT) of Yb atoms using the S10–P31 intercombination transition. The temperature of the ultracold atoms in the MOT was 40 μK when measured using the time-of-flight method, and this is sufficient for loading the atoms into an optical lattice. The fiber-based frequency comb is shown to be a useful tool for controlling the laser frequency in cold-atom experiments.

DOI
10.1364/josab.27.001388

Related papers

Magneto-optical trapping of Yb atoms using an intercombination transition with an optical frequency comb: For realizing an Yb optical lattice clock

Masami Yasuda, T. Kohno, Feng-Lei Hong +6 more

We have magneto-optically trapped cold ytterbium atoms using an intercombination transition for realizing an optical lattice clock. For this purpose, we have developed a laser-diode-based light source, which is phase-locked to an optical frequency comb, thus attaining both laser frequency stabilization and laser linewidth narrowing.

Conference on Precision Electromagnetic Measurements•Jun 1, 2008•0 citations

用于镱原子互组跃迁的556nm激光的高可靠性稳频

Zhuan-Xian Xiong, Yun Long, Huixing Xiao +3 more

A frequency-stabilized 556-nm laser is an essential tool for experimental studies associated with 1 S0-3 P1 intercombination transition of ytterbium (Yb) atoms.A 556-nm laser light using a single-pass second harmonic generation (SHG) is obtained in a periodically poled MgO:LiNbO3 (PPLN) crystal pumped by a fiber laser at 1111.6 nm.A robust frequency stabilization method which facilitates the control of laser frequency with an accuracy better than the natural linewidth (187 kHz) of the intercombination line is developed.The short-term frequency jitter is reduced to less than 100 kHz by locking the laser to a home-made reference cavity.A slow frequency drift is sensed by the 556-nm fluorescence signal of an Yb atomic beam excited by one probe beam and is reduced to less than 50-kHz by a computer-controlled servo system.The laser can be stably locked for more than 5 h.This frequency stabilization method can be extended to other alkaline-earth-like atoms with similar weak intercombination lines.

Chinese Optics Letters•Jan 1, 2011•4 citations

Frequency locking of a 399-nm laser referenced to fluorescence spectrum of an ytterbium atomic beam

Yun Long Yun Long, Zhuan-Xian Xiong, Xi Zhang +3 more

The laser cooling of ytterbium (Yb) atoms needs a 399-nm laser which operates on the strong 1 S0 -1 P1 transition and can be locked at the desired frequencies for different Yb isotopes.We demonstrate a frequency locking method using the fluorescence spectrum of an Yb atomic beam as a frequency reference.For unresolved fluorescence peaks, we make the spectrum of the even isotopes vanish by using the strong angular-dependence of the fluorescence radiations; the remained closely-spaced peaks are thus clearly resolved and able to serve as accurate frequency references.A computer-controlled servo system is used to lock the laser frequency to a single fluorescence peak of interest, and a frequency stability of 304 kHz is achieved.This frequency-locked laser enables us to realize stable blue magneto-optic-traps (MOT) for all abundant Yb isotopes.

Chinese Optics Letters•Jan 1, 2014•3 citations

Realization of Green MOT for Ytterbium Atoms

Zhao Peng-Yii, Xiong Zhuan-Xian, Yun Long +2 more

We report the experimental realization of a magneto-optical trap (MOT) of 174 Yb atoms operating on the 1 So− 3 P 1 intercombination transition at 555.8 nm. The green MOT is loaded by a Zeeman-slowed atomic beam. In order to increase the capture velocity of the MOT, we use the trapping laser beams consisting of five discrete frequency components obtained by modulating the laser light through an electro-optic modulator. The trapped atomic number of the 174 Yb isotope is about 6.2 × 10 5 , and the temperature of the cold atomic cloud is estimated to be about 100 μK. The success of the green MOT is an important step towards the goal of an ytterbium optical clock.

Chinese Physics Letters•Aug 1, 2009•12 citations

Ytterbium optical lattice clock at INRIM

Marco Pizzocaro, Filippo Bregolin, Gianmaria Milani +5 more

We present an optical lattice clock based on ytterbium 171Yb atoms developed in the laboratories of INRIM. In the experiment, we cool and trap ytterbium atoms in a two stage magneto-optical trap (MOT) (at 399nm and 556nm for the first and second stage, respectively). Atoms are then transferred in a horizontal, one-dimensional optical lattice at the magic wavelength (759 nm). Here the clock transition at 578nm is probed by a laser stabilized on an ultra-stable cavity. We describe the generation of all the laser sources, the physic package and the operation of the clock. Lasers at 399 nm, 556nm and 578nm are obtained, with different techniques, using non-linear crystals starting from infrared sources. The clock laser is stabilized using a high finesse notched ULE cavity. The lattice is made with a titanium-sapphire laser. The aluminum vacuum chamber is designed for wide optical access and its temperature is measured by 8 thermistors for blackbody shift evaluation. Our system allows for fast loading of the lattice with 1 × 104atoms trapped in the lattice in 250 ms. We obtained preliminary spectroscopy results and we locked the clock laser to the atomic line. Future perspectives are discussed.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Apr 1, 2015•1 citation

Quasicontinuous sub- μ K strontium source without a high-finesse cavity-stabilized laser

Sana Boughdachi, Benedikt Heizenreder, Ananya Sitaram +8 more

We demonstrate a quasicontinuous sub- μ K strontium source achieved without the use of a high-finesse cavity-locked laser. Our frequency reference is based on a dispersion-optimized, fiber-based frequency comb that enables sub-kHz linewidths. The long-term stability of the comb is defined by an external rf reference: either a 10 MHz rf signal from the Dutch Metrology Institute (VSL) or a tunable rf source whose long-term stability is maintained by monitoring and stabilizing the position of a narrow-line magneto-optical trap (MOT) [Sillus , Rev. Sci. Instrum., 92, 033204 (2021); Heizenreder , Continuous cloud position spectroscopy using a magneto-optical trap, Phys. Rev. Appl. (2026)]. The comb-stabilized system is benchmarked against a conventional cavity-locked laser and achieves comparable performance in broadband and single-frequency MOTs using the narrow 1 S 0 → 3 P 1 laser-cooling transition. We generate high-flux, sub- μ K samples of all three bosonic strontium isotopes and demonstrate quasicontinuous outcoupling from the MOT. These results highlight the system’s suitability for compact, robust, and field-deployable continuous cold-atom devices.

arXiv:2507.23617•Physical Review Applied•Feb 6, 2026•1 citation
A frequency-stabilized light source emitting at 556 nm is realized by frequency doubling a 1112 nm laser, which is phase locked to a fiber-based optical frequency comb. The 1112 nm laser is either an ytterbium (Yb)-doped distributed feedback fiber laser or a master-slave laser system that uses an external cavity diode laser as a master laser. We have achieved the continuous frequency stabilization of the light source over a 5 day period. With the light source, we have completed the second-stage magneto-optical trapping (MOT) of Yb atoms using the S10–P31 intercombination transition. The temperature of the ultracold atoms in the MOT was 40 μK when measured using the time-of-flight method, and this is sufficient for loading the atoms into an optical lattice. The fiber-based frequency comb is shown to be a useful tool for controlling the laser frequency in cold-atom experiments.
A frequency-stabilized 556-nm laser is an essential tool for experimental studies associated with 1 S0-3 P1 intercombination transition of ytterbium (Yb) atoms.A 556-nm laser light using a single-pass second harmonic generation (SHG) is obtained in a periodically poled MgO:LiNbO3 (PPLN) crystal pumped by a fiber laser at 1111.6 nm.A robust frequency stabilization method which facilitates the control of laser frequency with an accuracy better than the natural linewidth (187 kHz) of the intercombination line is developed.The short-term frequency jitter is reduced to less than 100 kHz by locking the laser to a home-made reference cavity.A slow frequency drift is sensed by the 556-nm fluorescence signal of an Yb atomic beam excited by one probe beam and is reduced to less than 50-kHz by a computer-controlled servo system.The laser can be stably locked for more than 5 h.This frequency stabilization method can be extended to other alkaline-earth-like atoms with similar weak intercombination lines.
The laser cooling of ytterbium (Yb) atoms needs a 399-nm laser which operates on the strong 1 S0 -1 P1 transition and can be locked at the desired frequencies for different Yb isotopes.We demonstrate a frequency locking method using the fluorescence spectrum of an Yb atomic beam as a frequency reference.For unresolved fluorescence peaks, we make the spectrum of the even isotopes vanish by using the strong angular-dependence of the fluorescence radiations; the remained closely-spaced peaks are thus clearly resolved and able to serve as accurate frequency references.A computer-controlled servo system is used to lock the laser frequency to a single fluorescence peak of interest, and a frequency stability of 304 kHz is achieved.This frequency-locked laser enables us to realize stable blue magneto-optic-traps (MOT) for all abundant Yb isotopes.
We report the experimental realization of a magneto-optical trap (MOT) of 174 Yb atoms operating on the 1 So− 3 P 1 intercombination transition at 555.8 nm. The green MOT is loaded by a Zeeman-slowed atomic beam. In order to increase the capture velocity of the MOT, we use the trapping laser beams consisting of five discrete frequency components obtained by modulating the laser light through an electro-optic modulator. The trapped atomic number of the 174 Yb isotope is about 6.2 × 10 5 , and the temperature of the cold atomic cloud is estimated to be about 100 μK. The success of the green MOT is an important step towards the goal of an ytterbium optical clock.
We present an optical lattice clock based on ytterbium 171Yb atoms developed in the laboratories of INRIM. In the experiment, we cool and trap ytterbium atoms in a two stage magneto-optical trap (MOT) (at 399nm and 556nm for the first and second stage, respectively). Atoms are then transferred in a horizontal, one-dimensional optical lattice at the magic wavelength (759 nm). Here the clock transition at 578nm is probed by a laser stabilized on an ultra-stable cavity. We describe the generation of all the laser sources, the physic package and the operation of the clock. Lasers at 399 nm, 556nm and 578nm are obtained, with different techniques, using non-linear crystals starting from infrared sources. The clock laser is stabilized using a high finesse notched ULE cavity. The lattice is made with a titanium-sapphire laser. The aluminum vacuum chamber is designed for wide optical access and its temperature is measured by 8 thermistors for blackbody shift evaluation. Our system allows for fast loading of the lattice with 1 × 104atoms trapped in the lattice in 250 ms. We obtained preliminary spectroscopy results and we locked the clock laser to the atomic line. Future perspectives are discussed.
We demonstrate a quasicontinuous sub- μ K strontium source achieved without the use of a high-finesse cavity-locked laser. Our frequency reference is based on a dispersion-optimized, fiber-based frequency comb that enables sub-kHz linewidths. The long-term stability of the comb is defined by an external rf reference: either a 10 MHz rf signal from the Dutch Metrology Institute (VSL) or a tunable rf source whose long-term stability is maintained by monitoring and stabilizing the position of a narrow-line magneto-optical trap (MOT) [Sillus , Rev. Sci. Instrum., 92, 033204 (2021); Heizenreder , Continuous cloud position spectroscopy using a magneto-optical trap, Phys. Rev. Appl. (2026)]. The comb-stabilized system is benchmarked against a conventional cavity-locked laser and achieves comparable performance in broadband and single-frequency MOTs using the narrow 1 S 0 → 3 P 1 laser-cooling transition. We generate high-flux, sub- μ K samples of all three bosonic strontium isotopes and demonstrate quasicontinuous outcoupling from the MOT. These results highlight the system’s suitability for compact, robust, and field-deployable continuous cold-atom devices.