Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1004.1895 · Physical Review B

Electronic implementations of interaction-free measurements

Luca Chirolli, Elia Strambini, Vittorio Giovannetti, Fabio Taddei, Vincenzo Piazza, Rosario Fazio, Fabio Beltram, Guido Burkard

Published Jul 7, 2010• 15 citations
arXivHTMLPDF

Abstract

Three different implementations of interaction-free measurements (IFMs) in solid-state nanodevices are discussed. The first one is based on a series of concatenated Mach-Zehnder interferometers, in analogy to optical-IFM setups. The second one consists of a single interferometer and concatenation is achieved in the time domain making use of a quantized electron emitter. The third implementation consists of an asymmetric Aharonov-Bohm ring. For all three cases we show that the presence of a dephasing source acting on one arm of the interferometer can be detected without degrading the coherence of the measured current. Electronic implementations of IFMs in nanoelectronics may play a fundamental role as very accurate and noninvasive measuring schemes for quantum devices.

DOI
10.1103/physrevb.82.045403

Related papers

Quantum interaction-free measurement

Zhi-chuan Dong, Peng Zhuang

"Interaction-free measurements" (IFM) originate from the latest quantum interferometric technologies. The latest research of quantum optics demonstrates, by using the complementary wavelike and particlelike natures of photons, it is possible to make interaction-free measurements by which the presence of an object can be determined with no photons being absorbed. The paper introduces the concept of "Interaction-free Measurement" (IFM), the original Elitzur-Vaidman scheme, the "High Efficiency Interaction-free Measurement", the application of quantum Zeno effect and the improved scheme proposed by Kwiat et al. The EV scheme is implemented in a Mach-Zehnder interferometer. Theoretically this paper also draws a conclusion in IFM feasibility by analyzing the wave functions of photon at various locations in the interferometer.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 13, 2006•0 citations

Coherent Detection of Electron Dephasing

Elia Strambini, Luca Chirolli, Vittorio Giovannetti +4 more

We show that an Aharonov-Bohm ring with asymmetric electron injection can act as a coherent detector of electron dephasing. The presence of a dephasing source in one of the two arms of a moderately-to-highly asymmetric ring changes the response of the system from total reflection to complete transmission while preserving the coherence of the electrons propagating from the ring, even for strong dephasing. We interpret this phenomenon as an implementation of an interaction-free measurement.

arXiv:0909.2197•Physical Review Letters•Apr 27, 2010•11 citations

Experimental realization of interaction-free measurements

Harald Weinfurter, Paul G. Kwiat, Thomas Herzog +2 more

Recently, it has been pointed out that it is possible to make a quantum-mechanical interaction-free measurement (IFM), in which the existence of an object in a given region of space may be determined seemingly without interacting with it.1,2 In the embodiment first proposed by Elitzur and Vaidman,3 a standard Michelson interferometer is aligned so that incident single photons (obtained in our experiment by using parametric downconversion; see Fig. 1) must exit by the same port in which they entered, in the absence of any object within the interferometer. The presence of an object (e.g., the mirror leading to detector DB) in one of the arms completely changes the possible outcomes because the constructive interference is interrupted. Now it is possible that the photon will exit from the other exit port, to detector DIfm. By detecting the photon in this case, one can claim with certainty that an object was within the interferometer, even though the photon could not have interacted with it. If the beam splitter has a very low reflectivity, then the fraction of IFMs approaches 1/2.

Quantum Electronics and Laser Science Conference•May 22, 1995•8 citations

Interaction-Free Measurement with Electrons

Amy E. Turner, Cameron Johnson, Pieter Kruit +1 more

Here, we experimentally demonstrate interaction-free measurements with electrons using a novel electron Mach-Zehnder interferometer. The flexible two-grating electron interferometer is constructed in a conventional transmission electron microscope and achieves high contrast in discrete output detectors, tunable alignment with independently movable beam splitters, and scanning capabilities for imaging. With this path-separated electron interferometer, which closely matches theoretical expectations, we demonstrate electron interaction-free measurements with an efficiency of 14±1%. Implementing this quantum protocol in electron imaging opens a path toward interaction-free electron microscopy.

Physical Review Letters•Sep 7, 2021•53 citations

"Interaction-free" quantum measurements

Andrew G. White, Paul G. Kwiat, Olaf Nairz +2 more

Summary form only given.Using the complementary wave-like and particle-like natures of photons, one can make interaction-free measurements (IFM)-the presence of an object can be determined with no photons being absorbed. By using an application of the quantum Zeno effect (weakly and repeatedly testing for the object's presence so that the otherwise coherent evolution of the interrogating photon is inhibited), we have demonstrated the feasibility of IFMs with an efficiency of >85%, higher than that possible in the original IFM scheme, where, at most, half of the measurements could be interaction free. We also investigate various interaction-free imaging systems, demonstrate imaging with a resolution <5 /spl mu/m, and define the limits to these systems. We also discuss in which sense interaction-free measurements really are not.

Conference on Lasers and Electro-Optics•Jan 1, 1998•10 citations

Two-particle Aharonov–Bohm effect in electronic interferometers

Janine Splettstoesser, Peter Samuelsson, Michael V. Moskalets +1 more

We review recent theoretical investigations on the two-particle Aharonov–Bohm effect and its relation to entanglement production and detection. The difficulties of the entanglement detection due to dephasing and finite temperature are discussed regarding a recent experimental realization of a two-particle Aharonov–Bohm interferometer [15]. We also discuss a theoretical proposal for a two-particle Aharonov–Bohm interferometer, which as against the finite bias setup is driven with dynamical single-electron sources allowing for the tunable production of time-bin entanglement.

Journal of Physics A Mathematical and Theoretical•Aug 12, 2010•12 citations
Three different implementations of interaction-free measurements (IFMs) in solid-state nanodevices are discussed. The first one is based on a series of concatenated Mach-Zehnder interferometers, in analogy to optical-IFM setups. The second one consists of a single interferometer and concatenation is achieved in the time domain making use of a quantized electron emitter. The third implementation consists of an asymmetric Aharonov-Bohm ring. For all three cases we show that the presence of a dephasing source acting on one arm of the interferometer can be detected without degrading the coherence of the measured current. Electronic implementations of IFMs in nanoelectronics may play a fundamental role as very accurate and noninvasive measuring schemes for quantum devices.
"Interaction-free measurements" (IFM) originate from the latest quantum interferometric technologies. The latest research of quantum optics demonstrates, by using the complementary wavelike and particlelike natures of photons, it is possible to make interaction-free measurements by which the presence of an object can be determined with no photons being absorbed. The paper introduces the concept of "Interaction-free Measurement" (IFM), the original Elitzur-Vaidman scheme, the "High Efficiency Interaction-free Measurement", the application of quantum Zeno effect and the improved scheme proposed by Kwiat et al. The EV scheme is implemented in a Mach-Zehnder interferometer. Theoretically this paper also draws a conclusion in IFM feasibility by analyzing the wave functions of photon at various locations in the interferometer.
Recently, it has been pointed out that it is possible to make a quantum-mechanical interaction-free measurement (IFM), in which the existence of an object in a given region of space may be determined seemingly without interacting with it.1,2 In the embodiment first proposed by Elitzur and Vaidman,3 a standard Michelson interferometer is aligned so that incident single photons (obtained in our experiment by using parametric downconversion; see Fig. 1) must exit by the same port in which they entered, in the absence of any object within the interferometer. The presence of an object (e.g., the mirror leading to detector DB) in one of the arms completely changes the possible outcomes because the constructive interference is interrupted. Now it is possible that the photon will exit from the other exit port, to detector DIfm. By detecting the photon in this case, one can claim with certainty that an object was within the interferometer, even though the photon could not have interacted with it. If the beam splitter has a very low reflectivity, then the fraction of IFMs approaches 1/2.
Here, we experimentally demonstrate interaction-free measurements with electrons using a novel electron Mach-Zehnder interferometer. The flexible two-grating electron interferometer is constructed in a conventional transmission electron microscope and achieves high contrast in discrete output detectors, tunable alignment with independently movable beam splitters, and scanning capabilities for imaging. With this path-separated electron interferometer, which closely matches theoretical expectations, we demonstrate electron interaction-free measurements with an efficiency of 14±1%. Implementing this quantum protocol in electron imaging opens a path toward interaction-free electron microscopy.
Summary form only given.Using the complementary wave-like and particle-like natures of photons, one can make interaction-free measurements (IFM)-the presence of an object can be determined with no photons being absorbed. By using an application of the quantum Zeno effect (weakly and repeatedly testing for the object's presence so that the otherwise coherent evolution of the interrogating photon is inhibited), we have demonstrated the feasibility of IFMs with an efficiency of >85%, higher than that possible in the original IFM scheme, where, at most, half of the measurements could be interaction free. We also investigate various interaction-free imaging systems, demonstrate imaging with a resolution <5 /spl mu/m, and define the limits to these systems. We also discuss in which sense interaction-free measurements really are not.
We review recent theoretical investigations on the two-particle Aharonov–Bohm effect and its relation to entanglement production and detection. The difficulties of the entanglement detection due to dephasing and finite temperature are discussed regarding a recent experimental realization of a two-particle Aharonov–Bohm interferometer [15]. We also discuss a theoretical proposal for a two-particle Aharonov–Bohm interferometer, which as against the finite bias setup is driven with dynamical single-electron sources allowing for the tunable production of time-bin entanglement.