Optical detection of Rydberg states using electromagnetically induced transparency (EIT) enables continuous measurement of electric fields in a confined geometry. In this paper, we demonstrate the formation of radio frequency (rf)-dressed EIT resonances in a thermal Rb vapour and show that such states exhibit enhanced sensitivity to dc electric fields compared to their bare counterparts. Fitting the corresponding EIT profile enables precise measurements of the dc field independent of laser frequency fluctuations. Our results suggest that space charges within the enclosed cell reduce electric field inhomogeneities within the interaction region.
Optical detection of Rydberg states using electromagnetically induced transparency (EIT) enables continuous measurement of electric fields in a confined geometry. In this paper, we demonstrate the formation of radio frequency (rf)-dressed EIT resonances in a thermal Rb vapour and show that such states exhibit enhanced sensitivity to dc electric fields compared to their bare counterparts. Fitting the corresponding EIT profile enables precise measurements of the dc field independent of laser frequency fluctuations. Our results suggest that space charges within the enclosed cell reduce electric field inhomogeneities within the interaction region.
We initially discuss the theory of three-level systems using the dressed state formalism. One of the dressed states, containing a ground state and a Rydberg state, does not couple with the probe laser; thus, the medium becomes transparent to the latter. This phenomenon is known as electro- magnetically induced transparency (EIT) and this dressed state is known as a Rydberg dark state. We show that EIT can be used to extract the reduced dipole matrix element for transitions to a Rydberg state. However, a prob- lem with three-level Rydberg EIT in a vapour cell is the occurrence of space charges caused by photoelectric ionisation of Rb metal deposited inside the cell. To avoid this problem, we consider adding a third laser resonant with a fourth level. This is to avoid using the laser whose wavelength is less than the threshold wavelength. In cold atoms, the effect of the third laser is to split the usual EIT resonance into a doublet. In thermal atoms, we observe narrow features due to electromagnetically induced absorption and electro- magnetically induced transparency in the Doppler-free configuration. Next we consider the action of a far off-resonance radio frequency (rf) field in the three-level system. We demonstrate the formation of rf-dressed EIT reso- nances in a thermal Rb vapour and show that such states exhibit enhanced sensitivity to dc electric fields compared to their bare counterparts. Fitting the corresponding EIT profile enables precise measurements of the dc field in- dependent of laser frequency fluctuations. We further investigate the theory of rf-dressed Rydberg EIT using the Floquet approach in order to understand the formation of the sideband structure of the Rydberg state. We find that if the time scale of the rf interaction is much shorter than that of the system evolution and decoherence, the sideband structure is well resolved. We also show that the intermediate state exhibits a sideband structure, induced by the Rydberg state, when the Rabi frequency of coupling laser is larger than twice the modulation frequency. Finally we consider resonant microwave cou- pling between the Rydberg states which leads to an Autler-Townes splitting of the EIT resonance in cold atoms. This splitting can be employed to vary the group index by ±10^5 allowing independent control of the absorptive and dispersive properties of the medium, i.e., one can switch the transparency of the medium or control the group velocity of a pulse propagation by tuning on and off the microwave field.
The large electric dipole moment of the Rydberg atom allows for strong coupling with weak electric fields, and is widely used in electric field measurements because of its reproducibility, precision and stability. The combination of Rydberg atoms and electromagnetically induced transparency (EIT) technology has been used for detecting and characterizing radio-frequency (RF) electric fields. In this work, by selecting probe light (852 nm), dressed light (1470 nm), and coupled light (780 nm), the Rydberg state (49P3/2) of Cs atom is prepared by using a three-photon excitation scheme through using all-infrared light excitation of Rydberg atoms. We experimentally observe the EIT spectra of the Rydberg states decorated by radio-frequency electric fields, which optically detects Rydberg atoms. The effect of the amplitude and frequency of the RF electric field on the spectrum is explored in light of changes in the EIT spectrum. The results show that in the region of weak electric field, only the ac Stark energy shift and spectral broadening occur. As the electric field is further enhanced, the sideband phenomenon occurs in both the primary peak and secondary peak of the EIT. In the region of strong field, the Rydberg energy level produces a series of Floquet states with higher-order terms, as well as state shifting and mixing, resulting in asymmetry in the spectra of the EIT sideband peaks. The effect of frequency on the shielding effect of the Cs vapor cell is further discussed based on the shift of the main peak of the EIT. The demodulation of the electric field in a range of 50 Hz–1 kHz with a fidelity of 95% is achieved by modulating the low-frequency electric field to the RF electric field. The results can provide valuable references for spectral detection and traceable measurements of low-frequency electric fields.
We prepare and analyze Rydberg states with orbital quantum numbers ℓ≤6 using three-optical-photon electromagnetically induced transparency (EIT) and radio frequency (rf) dressing, and employ the high- ℓ states in electric-field sensing. Rubidium-85 atoms in a room-temperature vapor cell are first promoted into the 25F5/2 state via Rydberg-EIT with three infrared laser beams. Two rf dressing fields then (near-)resonantly couple the 25F, 25H(ℓ=5) , and 25I(ℓ=6) Rydberg states. The dependence of the rf-dressed Rydberg-state level structure on rf powers, rf and laser frequencies is characterized using EIT. Furthermore, we discuss the principles of dc-electric-field sensing using high- ℓ Rydberg states and experimentally demonstrate the method using test electric fields of ≲50 V/m induced via photo-illumination of the vapor-cell wall. We measure the highly nonlinear dependence of the dc-electric-field strength on the power of the photo-illumination laser. Numerical calculations, which reproduce our experimental observations well, elucidate the underlying physics. Our paper is relevant to high-precision spectroscopy of high- ℓ Rydberg states, Rydberg-atom-based electric-field sensing, and plasma electric-field diagnostics. Published by the American Physical Society 2024
A Rydberg atom is a special type of atom characterized by a high principal quantum number. Electric field sensors based on Rydberg atoms have received widespread attention due to their high polarizability. However, there is currently little research on the use of Rydberg atoms for direct current (DC) or low-frequency electric fields, mainly due to the shielding effect of atomic vapor cells in low-frequency electric fields, which makes accurate measurement of the electric fields extremely challenging. In this paper, we construct a Rydberg ladder configuration by using probe laser at 852 nm and coupling laser at 510 nm in a room-temperature cesium vapor cell with integrated electrode plates, thereby enabling the realizing of a Floquet-EIT (electromagnetically induced transparency) spectrum dressed by a radio frequency (RF) field in the presence of a DC electric field. We further study the influence of DC electric field on spectral characteristic. Experimentally, it is observed that when only the RF electric field is applied, the EIT spectrum displays solely even-order sidebands. Furthermore, when both the RF field and the DC electric field are simultaneously present, the first-order sideband signal of the Floquet-EIT is observed. As the intensity of the DC electric field increases, the amplitude of the first-order sideband gradually increases. However, increasing the DC electric field to a sufficient magnitude induces sideband interference, which leads the sideband amplitudes to decrease. Furthermore, increasing the RF frequency can alleviate the interference effects induced by the DC electric field on the first-order sideband. Finally, comparing the relative standard deviation of the sideband amplitudes of the Floquet-EIT spectra with the frequency shifts of the DC-Stark spectra under weak DC electric fields, we find that the measurement accuracy of the former is significantly superior to that of the latter. This work makes use of a Cs atomic vapor cell with an integrated electrode to avoid shielding effects. By observing Floquet-EIT spectra, the response of the spectra to DC electric fields is investigated. This experiment provides novel insights into the quantum sensing measurements of DC and low-frequency electric fields.
The use of Rydberg atoms for radio frequency electric field sensing has emerged as a promising alternative to traditional antenna-based designs that enables all-optical readout. However, the need for atomic vapor cells comprised of dielectric materials can adversely affect the electric field distribution at the probing volume. Here we describe the effects of electric field inhomogeneity on measured optical electromagnetically induced transparency (EIT) spectra. This is accomplished using custom-designed waveguide-embedded atomic vapor cells with stub tuners that allow control of the degree of electric field inhomogeneity within the cell. We describe the resulting broadening of the measured EIT feature and the associated reduction in magnitude, which results in an overall reduced sensitivity of the resulting measurement.
We investigate a technique for detecting radio frequency (RF) electric fields in a cesium (Cs) vapor cell at room temperature by collecting charges from ionized Rydberg atoms and compare its performance with the established method of electromagnetically induced transparency (EIT). By applying a known RF field, we measure the response from both the electrical (ionization current-based) and optical (EIT-based) readouts. The ionization current-based method yields a sensitivity of 22 μ V m−1 Hz−1/2, while the EIT-based method achieves 3.7 μ V m−1 Hz−1/2. The sensitivity of the ionization current-based method is limited by the 2.2 k Ω resistance between the collection electrodes, attributed to a thin Cs film on the inner surfaces of the vapor cell. Controlling or eliminating the Cs layer can significantly improve the sensitivity of this ionization approach.