Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0902.4194 · Physical Review B

Quantum capacitance detector: A pair-breaking radiation detector based on the single Cooper-pair box

Matthew D. Shaw, Juan Bueno, Peter K. Day, Charles Mathias Bradford, P. M. Echternach

Published Apr 14, 2009• 33 citations
arXivHTMLPDF

Abstract

We present a proposed design for a pair-breaking photodetector for far-infrared and submillimeter radiation. Antenna-coupled radiation generates quasiparticles in a superconducting absorber, the density of which are measured using a single Cooper-pair box. Readout is performed using an electromagnetic oscillator or a microwave resonator, which is well suited for frequency multiplexing in large arrays. Theoretical limits to detector sensitivity are discussed and modeled, with predicted sensitivities on the order of ${10}^{\ensuremath{-}21}\text{ }\text{W}/\sqrt{\text{Hz}}$. We anticipate that this detector can be used to address key scientific goals in far-infrared and submillimeter astronomy.

DOI
10.1103/physrevb.79.144511

Related papers

The Quantum Capacitor Detector: A Single Cooper Pair Box Based Readout for Pair Breaking Photo-detectors

P. M. Echternach, Matthew D. Shaw, Juan Bueno +2 more

We propose a sensitive new detector based on Cooper pair breaking in a superconductor. The quantum capacitor detector (QCD) exploits the extraordinary sensitivity of superconducting single-electron devices to the presence of quasiparticles generated by pair-breaking photons. This concept would enable single-photon detection at far-IR and sub-millimeter frequencies with detector sensitivities that exceed that of transition-edge-sensor bolometers (TES), kinetic inductance detectors (KID), and superconducting tunnel junction detectors (STJ). The detectors we propose are based on the single Cooper pair box (SCB), a mesoscopic superconducting device that has been successfully developed at JPL for applications in quantum computing. This concept allows for frequency multiplexing of a large number of pixels using a single RF line, and does not require individual bias of each pixel. The QCD is ideal for the sensitive spectrographs considered for upcoming cold space telescopes, such as BLISS for SPICA in the coming decade, and for the more ambitious instruments for the SAFIR / CALISTO and SPIRIT / SPECS missions envisioned for the 2020 decade. These missions require large detector arrays (> 10,000 elements) which are limited by astrophysical background noise, corresponding to a noise-equivalent power (NEP) as low as 2x10-20 W / Hz1/2. Given its intrinsic response time, the QCD could also be used for energy-resolved visible photon detection, with estimated energy resolution > 100, enabling imaging low-resolution spectroscopy with an array of detectors.

arXiv:0806.4205•Jun 25, 2008•0 citations

Recent progress on photon-counting superconducting detectors for submillimeter astronomy

John D. Teufel, Thomas R. Stevenson, W.‐T. Hsieh +9 more

We are developing superconducting direct detectors for submillimeter astronomy that can in principle detect individual photons. These devices, Single Quasiparticle Photon Counter (SQPC), operate by measuring the quasiparticles generated when single Cooper-pairs are broken by absorption of a submillimeter photon. This photoconductive type of device could yield high quantum efficiency, large responsivity, microsecond response times, and sensitivities in the range of 10-20 Watts per root Hertz. The use of antenna coupling to a small absorber also suggests the potential for novel instrument designs and scalability to imaging or spectroscopic arrays. We will describe the device concept, recent results on fabrication and electrical characterization of these detectors, issues related to saturation and optimization of the device parameters. Finally, we have developed practical readout amplifiers for these high-impedance cryogenic detectors based on the Radio-Frequency Single-Electron Transistor (RF-SET). We will describe results of a demonstration of a transimpedance amplifier based on closed-loop operation of an RF-SET, and a demonstration of a wavelength-division multiplexing scheme for the RF-SET. These developments will be a key ingredient in scaling to large arrays of high-sensitivity detectors.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 1, 2003•3 citations

Superconducting quantum capacitance detectors at terahertz waveband

Jian Chen, Lili Shi, Tianyuan Chi +2 more

Single photon detectors (SPDs) at terahertz (THz) waveband are necessary for the THz applications. The superconducting quantum capacitance detectors (QCDs) are proved to be ultra-sensitive at THz waveband. 1.5 THz single photon detection has been achieved. Besides their sensitivity, large array of QCDs has also developed. Therefore, it is convenient of QCDs to achieve multiplexing through a microwave feedline like MKIDs. A QCD consists of a high quality factor (Q) microwave superconducting resonators and a single cooper-pair box (SCB). The microwave resonators are fabricated using tantalum (Ta) or niobium (Nb). The SCB is made of aluminum (Al). The ground electrode of the SCB is designed to be an absorber at THz waveband. The absorber is an inductive absorber consisting of orthogonal Al nanowires. Finally, we succeeded in measuring the periodic quantum capacitance signals. However, the responsivity is relatively low due to its weak coupling to the resonators of SCB. In the future, we need to optimize the performance of the detectors. QCDs are a prospect candidate of the next-generation astronomy observation and so on.

Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI•Jun 14, 2024•0 citations

Proof of concept of the quantum capacitance detector

Juan Bueno, Matthew D. Shaw, Peter K. Day +1 more

We fabricated and tested a proof-of-concept quantum capacitance detector, a superconducting radiation detector described in a recent publication [Shaw et al., Phys. Rev. B 79, 144511 (2009)]. In this concept, quasiparticle tunneling in a single Cooper-pair box is used to measure the density of quasiparticles in a superconducting absorber. We measured and characterized the response of the device to electrical quasiparticle injection obtaining its sensitivity. Moreover, we have converted the sensitivity to electrical noise-equivalent power, which is in the 10−18 W/Hz1/2 range at loading powers between 10−15–10−16 W.

Applied Physics Letters•Mar 8, 2010•18 citations

Progress Towards High-Sensitivity Arrays of Detectors of Sub-mm Radiation using Superconducting Tunnel Junctions with Radio-Frequency Single-Electron Transistors

Thomas R. Stevenson, W.‐T. Hsieh, Muxian Li +4 more

The science drivers for the SPIRIT/SPECS missions demand sensitive, fast, compact, low-power, large-format detector arrays for high resolution imaging and spectroscopy in the far infrared and submillimeter. Detector arrays with 10,000 pixels and sensitivity less than 10(exp 20)-20 W/Hz(exp 20)0.5 are needed. Antenna-coupled superconducting tunnel junction detectors with integrated rf single-electron transistor readout amplifiers have the potential for achieving this high level of sensitivity, and can take advantage of an rf multiplexing technique when forming arrays. The device consists of an antenna structure to couple radiation into a small superconducting volume and cause quasiparticle excitations, and a single-electron transistor to measure currents through tunnel junction contacts to the absorber volume. We will describe optimization of device parameters, and recent results on fabrication techniques for producing devices with high yield for detector arrays. We will also present modeling of expected saturation power levels, antenna coupling, and rf multiplexing schemes.

•Jan 1, 2002•0 citations

Optical characterization of the quantum capacitance detector at 200 μm

Juan Bueno, Nuria Llombart, Peter K. Day +1 more

We present the optical characterization at 200 μm wavelength of an antenna coupled quantum capacitance detector (QCD), a cryogenic detector based on a single Cooper pair box (SCB). The response of the device to a cryogenic blackbody source and the device noise have been measured giving an optical noise-equivalent power (NEP) at a readout frequency of 10 kHz of 2 × 10−17 W/Hz1/2 at an optical loading of 17 fW. For optical loadings of a few pW, the optical NEP was on the order of 10−16 W/Hz1/2, demonstrating that QCDs could already work as detectors for far-infrared and submillimeter wave radiation in a ground based telescope.

Applied Physics Letters•Oct 24, 2011•6 citations
We present a proposed design for a pair-breaking photodetector for far-infrared and submillimeter radiation. Antenna-coupled radiation generates quasiparticles in a superconducting absorber, the density of which are measured using a single Cooper-pair box. Readout is performed using an electromagnetic oscillator or a microwave resonator, which is well suited for frequency multiplexing in large arrays. Theoretical limits to detector sensitivity are discussed and modeled, with predicted sensitivities on the order of 10\ensuremath−21 W/Hz{10}^{\ensuremath{-}21}\text{ }\text{W}/\sqrt{\text{Hz}}10\ensuremath−21 W/Hz​. We anticipate that this detector can be used to address key scientific goals in far-infrared and submillimeter astronomy.
We propose a sensitive new detector based on Cooper pair breaking in a superconductor. The quantum capacitor detector (QCD) exploits the extraordinary sensitivity of superconducting single-electron devices to the presence of quasiparticles generated by pair-breaking photons. This concept would enable single-photon detection at far-IR and sub-millimeter frequencies with detector sensitivities that exceed that of transition-edge-sensor bolometers (TES), kinetic inductance detectors (KID), and superconducting tunnel junction detectors (STJ). The detectors we propose are based on the single Cooper pair box (SCB), a mesoscopic superconducting device that has been successfully developed at JPL for applications in quantum computing. This concept allows for frequency multiplexing of a large number of pixels using a single RF line, and does not require individual bias of each pixel. The QCD is ideal for the sensitive spectrographs considered for upcoming cold space telescopes, such as BLISS for SPICA in the coming decade, and for the more ambitious instruments for the SAFIR / CALISTO and SPIRIT / SPECS missions envisioned for the 2020 decade. These missions require large detector arrays (> 10,000 elements) which are limited by astrophysical background noise, corresponding to a noise-equivalent power (NEP) as low as 2x10-20 W / Hz1/2. Given its intrinsic response time, the QCD could also be used for energy-resolved visible photon detection, with estimated energy resolution > 100, enabling imaging low-resolution spectroscopy with an array of detectors.
We are developing superconducting direct detectors for submillimeter astronomy that can in principle detect individual photons. These devices, Single Quasiparticle Photon Counter (SQPC), operate by measuring the quasiparticles generated when single Cooper-pairs are broken by absorption of a submillimeter photon. This photoconductive type of device could yield high quantum efficiency, large responsivity, microsecond response times, and sensitivities in the range of 10-20 Watts per root Hertz. The use of antenna coupling to a small absorber also suggests the potential for novel instrument designs and scalability to imaging or spectroscopic arrays. We will describe the device concept, recent results on fabrication and electrical characterization of these detectors, issues related to saturation and optimization of the device parameters. Finally, we have developed practical readout amplifiers for these high-impedance cryogenic detectors based on the Radio-Frequency Single-Electron Transistor (RF-SET). We will describe results of a demonstration of a transimpedance amplifier based on closed-loop operation of an RF-SET, and a demonstration of a wavelength-division multiplexing scheme for the RF-SET. These developments will be a key ingredient in scaling to large arrays of high-sensitivity detectors.
Single photon detectors (SPDs) at terahertz (THz) waveband are necessary for the THz applications. The superconducting quantum capacitance detectors (QCDs) are proved to be ultra-sensitive at THz waveband. 1.5 THz single photon detection has been achieved. Besides their sensitivity, large array of QCDs has also developed. Therefore, it is convenient of QCDs to achieve multiplexing through a microwave feedline like MKIDs. A QCD consists of a high quality factor (Q) microwave superconducting resonators and a single cooper-pair box (SCB). The microwave resonators are fabricated using tantalum (Ta) or niobium (Nb). The SCB is made of aluminum (Al). The ground electrode of the SCB is designed to be an absorber at THz waveband. The absorber is an inductive absorber consisting of orthogonal Al nanowires. Finally, we succeeded in measuring the periodic quantum capacitance signals. However, the responsivity is relatively low due to its weak coupling to the resonators of SCB. In the future, we need to optimize the performance of the detectors. QCDs are a prospect candidate of the next-generation astronomy observation and so on.
We fabricated and tested a proof-of-concept quantum capacitance detector, a superconducting radiation detector described in a recent publication [Shaw et al., Phys. Rev. B 79, 144511 (2009)]. In this concept, quasiparticle tunneling in a single Cooper-pair box is used to measure the density of quasiparticles in a superconducting absorber. We measured and characterized the response of the device to electrical quasiparticle injection obtaining its sensitivity. Moreover, we have converted the sensitivity to electrical noise-equivalent power, which is in the 10−18 W/Hz1/2 range at loading powers between 10−15–10−16 W.
The science drivers for the SPIRIT/SPECS missions demand sensitive, fast, compact, low-power, large-format detector arrays for high resolution imaging and spectroscopy in the far infrared and submillimeter. Detector arrays with 10,000 pixels and sensitivity less than 10(exp 20)-20 W/Hz(exp 20)0.5 are needed. Antenna-coupled superconducting tunnel junction detectors with integrated rf single-electron transistor readout amplifiers have the potential for achieving this high level of sensitivity, and can take advantage of an rf multiplexing technique when forming arrays. The device consists of an antenna structure to couple radiation into a small superconducting volume and cause quasiparticle excitations, and a single-electron transistor to measure currents through tunnel junction contacts to the absorber volume. We will describe optimization of device parameters, and recent results on fabrication techniques for producing devices with high yield for detector arrays. We will also present modeling of expected saturation power levels, antenna coupling, and rf multiplexing schemes.
We present the optical characterization at 200 μm wavelength of an antenna coupled quantum capacitance detector (QCD), a cryogenic detector based on a single Cooper pair box (SCB). The response of the device to a cryogenic blackbody source and the device noise have been measured giving an optical noise-equivalent power (NEP) at a readout frequency of 10 kHz of 2 × 10−17 W/Hz1/2 at an optical loading of 17 fW. For optical loadings of a few pW, the optical NEP was on the order of 10−16 W/Hz1/2, demonstrating that QCDs could already work as detectors for far-infrared and submillimeter wave radiation in a ground based telescope.