arXiv:0902.1549

Bridging particle and wave sensitivity in a detector of configurable positive operator-valued measures

Graciana Puentes, Jeff S. Lundeen, Matthijs P. A. Branderhorst, Hendrik B. Coldenstrodt-Ronge, Brian J. Smith, Ian A. Walmsley

Published Feb 9, 2009• 0 citations

arXiv HTML PDF

Abstract

We report an optical detector with tunable positive operator-valued measures (POVMs). The device is based on a combination of weak-field homodyne techniques and photon-number-resolving detection. The resulting POVMs can be continuously tuned from Fock-state projectors to a variety of phase-dependent quantum-state measurements by adjusting different system parameters such as local oscillator coupling, amplitude and phase, allowing thus not only detection but also preparation of exotic quantum states. Experimental tomographic reconstructions of classical benchmark states are presented as a demonstration of the detector capabilities.

DOI: 10.48550/arxiv.0902.1549

Related papers

Bridging Particle and Wave Sensitivity in a Configurable Detector of Positive Operator-Valued Measures

Graciana Puentes, Jeff S. Lundeen, Matthijs P. A. Branderhorst +3 more

We report an optical detector with tunable positive operator-valued measures. The device is based on a combination of weak-field homodyne techniques and photon-number-resolving detection. The resulting positive operator-valued measures can be continuously tuned from Fock-state projectors to a variety of phase-dependent quantum-state measurements by adjusting different system parameters such as local oscillator coupling, amplitude, and phase, allowing thus not only detection but also preparation of exotic quantum states. Experimental tomographic reconstructions of classical benchmark states are presented as a demonstration of the detector capabilities.

Physical Review LettersFeb 27, 200934 citations

Complete Characterization of Weak-Homodyne Photon-Number-Resolving Detectors: Applications to Non-Classical Photonic State Reconstructions

Hendrik B. Coldenstrodt-Ronge, Graciana Puentes, Offir Cohen +8 more

A novel detector combining phase sensitivity and photon-number resolution is experimentally characterized by measuring its positive-operator-value measurement set. Direct application to tomographic reconstruction of heralded single-photon states is presented.

Conference on Lasers and Electro-OpticsJan 1, 20100 citations

Experimental techniques for continuous variable photonic quantum information

Hendrik B. Coldenstrodt-Ronge

Quantum optics is central to emerging quantum technologies such as quantum metrology and quantum information. The continuous variable (CV) approach to encoding information in a physical system, for example the electromagnetic field quadratures has significant advantages over discrete variables (DV) encoding. CV offers higher density encoding in a single optical state and on-demand state preparation for example. However, techniques for CV preparation, manipulation and measurement are not as well developed as the corresponding DV approach. In this thesis we present methods to characterize quantum detectors that operate in the CV regime, and discuss their application to CV state preparation. A quantum detector is described by its positive operator valued measure (POVM) set, with one operator for each measurement outcome. We present an experimental scheme for detector tomography, that is reconstruction of the POVM set of an unknown detector by means of measurement outcomes for a set of tomographically complete input states. We use this scheme to experimentally determine the POVM set of an avalanche photodiode (APD) and a time-multiplexed-detector (TMD) and compare the results to models of the detectors. We introduce a weak-homodyne photon-number-resolving detector (PNRD) , which uses a weak local oscillator beam to set a phase reference for the detection process. We develop a theoretical description of the sensitivity regimes for this detector using the Wigner phase space picture. We also present experimental detector tomography for a weak-homodyne detector based on two APDs. In many cases it is sufficient to calibrate the efficiencies of previously characterized PNRDs. We experimentally demonstrate a scheme using correlated photons produced by spontaneous parametric downconversion (SPDC) to determine the efficiencies of PNRDs, based on the photon number statistics of the source. The same SPDC source is also used to demonstrate preparation of photonic states in the photon number basis and for a first proof-of-principle experiment with a weak-homodyne PNRD based on a TMD.

Jan 1, 20110 citations

Tuning between photon-number and quadrature measurements with weak-field homodyne detection

Guillaume Thekkadath, D. S. Phillips, Jacob F. F. Bulmer +10 more

Variable measurement operators enable the optimization of strategies for testing quantum properties and the preparation of a range of quantum states. Here, we experimentally implement a weak-field homodyne detector that can continuously tune between measuring photon numbers and field quadratures. We combine a quantum signal with a coherent state on a balanced beam splitter and detect light at both output ports using photon-number-resolving transition edge sensors. We observe that the discrete difference statistics converge to the quadrature distribution of the signal as we increase the coherent state amplitude. Moreover, in a proof-of-principle demonstration of state engineering, we show the ability to control the photon-number distribution of a state that is heralded using our weak-field homodyne detector.

arXiv:1908.04765Physical Review AMar 20, 202039 citations

Experimental Quantification of Coherence of a Tunable Quantum Detector

Huichao Xu, Feixiang Xu, Thomas Theurer +5 more

Quantum coherence is a fundamental resource that quantum technologies exploit to achieve performance beyond that of classical devices. A necessary prerequisite to achieve this advantage is the ability of measurement devices to detect coherence from the measurement statistics. Based on a recently developed resource theory of quantum operations, here we quantify experimentally the ability of a typical quantum-optical detector, the weak-field homodyne detector, to detect coherence. We derive an improved algorithm for quantum detector tomography and apply it to reconstruct the positive-operator-valued measures of the detector in different configurations. The reconstructed positive-operator-valued measures are then employed to evaluate how well the detector can detect coherence using two computable measures. As the first experimental investigation of quantum measurements from a resource theoretical perspective, our work sheds new light on the rigorous evaluation of the performance of a quantum measurement apparatus.

arXiv:1910.08779Physical Review LettersAug 5, 202033 citations

Characterization of quantum states and detectors

Rajveer Nehra, Miller Eaton, Kevin Valson Jacob +6 more

Characterization of quantum states and detectors is a key task in rapidly emerging optical quantum science and technology. First, we introduce and experimentally demonstrate a noise-robust quantum state characterization protocol using photon-number-resolving (PNR) measurements. Unlike conventional continuous variable state tomography methods, our method utilizes computationally efficient semi-definite programming (SDP) and can be used to accurately reconstruct the state even after loss a known loss. The protocol is demonstrated for a weak coherent state as well as a single-photon Fock state. Next, we propose a method for characterizing a photodetector by directly reconstructing the Wigner functions of the detector’s Positive-Operator-Value-Measure (POVM) elements via weak-field homodyne technique. We also report our experimental progress on characterizing a superconducting transition-edge sensor for PNR measurements.

Aug 25, 20200 citations