Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0901.3652 · Superconductor Science and Technology

Fabrication technology of and symmetry breaking in superconducting quantum circuits

T Niemczyk, Frank Deppe, M. Mariantoni, E. P. Menzel, Eric A. Hoffmann, G. Wild, L Eggenstein, Achim Marx, R Gross

Published Jan 29, 2009• 27 citations
arXivHTMLPDF

Abstract

Superconducting quantum circuits are promising systems for experiments testing fundamental quantum mechanics on a macroscopic scale and for applications in quantum information processing. We report on the fabrication and characterization of superconducting flux qubits, readout dc SQUIDs, on-chip shunting capacitors, and high-quality coplanar waveguide resonators. Furthermore, we discuss the tunability and fundamental symmetry aspects inherent to all superconducting qubits, which can be regarded as artificial solid-state atoms. Comparing them to their natural counterparts, we discuss first- and second-order energy shifts due to static control fields. Additionally, we present an intuitive derivation of the first- and second-order matrix elements for level transitions in the presence of coherent microwave driving.

DOI
10.1088/0953-2048/22/3/034009

Related papers

Superconducting flux quantum circuits: characterization, quantum coherence, and controlled symmetry breaking

Frank Deppe

We fabricate a three-Josephson-junction flux qubit, a nonlinear superconducting circuit acting as a quantum two-level system with a macroscopic degree of freedom. First, the capacitance per unit area of the used Josephson junctions, C s =(100±25)fF/µm 2 , is determined from DC SQUID voltage steps. Next, we probe the coherence times of our qubit using a novel variant of the switching-DC-SQUID readout. At the optimal point, our device is relaxation-limited with T 1 ≅100ns and T φ ≅2µs. Ramsey and spin echo experiments reveal 1/f-noise and suggest microscopic fluctuators in the tunnel barriers as its source. As in other experiments, the 1/f-noise magnitude is ≅(10 -6 Φ 0 ) 2 . Finally, the qubit is coupled to a linear LC-resonator in a circuit quantum electrodynamics experiment. Spectroscopically, an upconversion mechanism enabled by controlled symmetry breaking is demonstrated.

•Jan 1, 2009•0 citations

Quantum-information-processing using superconducting qubit circuits

Franco Nori

Superconducting (SC) circuits can behave like atoms making transitions between a few energy levels. Such circuits can test quantum mechanics at macroscopic scales and be used to conduct atomic-physics experiments on a silicon chip. This talk overviews a few of our theoretical studies on SC circuits and quantum information processing (QIP) including: SC qubits for single photon generation and for lasing; controllable couplings among qubits; how to increase the coherence time of qubits using a capacitor in parallel to one of the qubit junctions; hybrid circuits involving both charge and flux qubits; testing Bell’s inequality in SC circuits; generation of GHZ states; quantum tomography in SC circuits; preparation of macroscopic quantum superposition states of a cavity field via coupling to a SC qubit; generation of nonclassical photon states using a SC qubit in a microcavity; scalable quantum computing with SC qubits; and information processing with SC qubits in a microwave field. Controllable couplings between qubits can be achieved either directly or indirectly. This can be done with and without coupler circuits, and with and without data-buses like EM fields in cavities (e.g., we will describe both the variable-frequency magnetic flux approach and also a generalized double-resonance approach that we introduced). It is also possible to “turn a quantum bug into a feature” by using microscopic defects as qubits, and the macroscopic junction as a controller of it. We have also studied ways to implement radically different approaches to QIP by using “cluster states” in SC circuits.

OSA Workshop on Entanglement and Quantum Decoherence•Jan 1, 2008•2 citations

Superconducting qubits : survey and theoretical investigations for solid state quantum computing

Santosh Kumar Gupta

Superconducting qubits have in recent years become a promising candidate for the implementation of a quantum computer due to their design flexibility, good protection from decohering elementary excitations, and availability of well developed fabrication and measurement techniques. Superconducting flux qubits, for which the effect of offset charge noise is reduced due to the fact that the Josephson energy dominates over the charging energy, correspond to one of the proposed means of designing a superconducting qubit. A nonlinear dispersive readout scheme of flux qubits involving a DC SQUID magnetometer that avoids the effects of on-chip dissipation can be readily implemented, yielding high contrast output for single qubit readout. Coupling schemes via nonlinear Josephson elements have also been realized. On the other hand, while the means of isolating superconducting qubits from external noise sources has been found, the mechanisms by which they undergo relaxation and decoherence due to intrinsic noise sources in the junctions themselves are not very well understood, and the question of how to deal with these noise sources remains unanswered in the general case. Other questions deal with the problem of experimentally observing entanglement in an array of coupled superconducting qubits, and finding the means by which the existence of entanglement in a typical laboratory setup may to some extent be verified by measurements on a global scale. Following a brief introductory review, we will first investigate the influence of a Two-Level Fluctuator on a DC SQUID driven by a finite current bias. Then we introduce a directly measurable signature of multiqubit entanglement for a large system of qubits and show that it is compatible to a recently introduced measure of global entanglement.

•Jan 1, 2010•0 citations

Fabrication and Characterization of Superconducting Metamaterial Resonators

Haozhi Wang

Superconducting circuits operated at low temperatures have led to rapid advances in quantum information processing as well as quantum optics in the microwave regime. Engineered quantum systems with a dense spectrum of modes coupled to artificial atoms, or qubits, formed from superconducting circuits offer an opportunity to explore large-scale entanglement or perform quantum simulations of many-body phenomena. Recent research efforts into artificial metamaterials have yielded microwave and optical systems with numerous counterintuitive properties, including left-handed transmission, where the group velocity and phase velocity for a wave point in opposite directions. Metamaterial resonators implemented with superconducting thin-film circuits provide a route to generating dense mode spectra in the microwave regime for coupling to qubits. In this thesis, we discuss the implementation of such superconducting metamaterial resonators. First, we derive the dispersion relation for one-dimensional metamaterial transmission lines and we describe the formation of resonators from such lines and their quality factors. Next, we describe the design and fabrication of transmission-line metamaterial resonators using superconducting thin films. We characterize the metamaterials through low-temperature microwave measurements as well as Laser Scanning Microscope (LSM) images of the microwave field distributions in the circuit. We compare these various measurements with numerical simulations of the microwave properties of the circuits, including simulated current density and charge density distributions for the excitation of different resonance modes. Following the successful realization of dense mode spectra in these circuits, we have initiated the first experiments with a superconducting transmon qubit coupled to a metamaterial resonator and we describe our progress in this direction.

•Jan 1, 2018•0 citations

Superconducting Qubits and Quantum Resonators

P. Forn-Díaz

Superconducting qubits are fabricated "loss-free" electrical circuits on a chip with size features of tens of nanometers. If cooled to cryogenic temperatures below -273 °C they behave as quantum elements, similar to atoms and molecules. Such a qubit can be manipulated by fast-oscillating magnetic fields and its resulting quantum state can be measured using a proper magnetic detector. These qubits could be the basic elements for a quantum processor. To that order, multiple qubits have to controllably interact, and to that purpose very high quality resonators are fabricated on the same chip. Effectively the interaction results from the phase-coherent exchange of a single photon between qubit and resonator. In this way it is highly analogous to the so-called cavity QED in atomic physics where single atoms couple to a single trapped photon, all inside a cavity resonator. In this thesis, a superconducting flux qubit has been coupled to an LC resonator and coherent exchange of a single photon between qubit and resonator has been achieved. A striking option in these superconducting circuits, not attainable in "common" atomic cavity-QED, is that the interaction between qubit and photon can be made very large, up to the limit that one no longer can talk about the qubit and resonator as such. This limit requires a fully different description and it leads to novel effects, e.g. in the energy spectrum of the qubit-resonator composite. The Bloch-Siegert spectral shift is experimentally demonstrated in this thesis. As a small but critical technical aside a new type of control line filter has been developed, which allows strong suppression of excess electrical noise that forms a threat for qubit coherence. Having two modes of operation, it shorts all low-frequency noise if control is idle while being transparent if control is active, where short or open is determined by the control line signal level itself.

•Sep 27, 2010•3 citations

Development of high quality superconducting resonators for quantum device applications

Dong-Gwang Ha, Seon Hoo Kim, So-Yeon Jun +5 more

We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•0 citations
Superconducting quantum circuits are promising systems for experiments testing fundamental quantum mechanics on a macroscopic scale and for applications in quantum information processing. We report on the fabrication and characterization of superconducting flux qubits, readout dc SQUIDs, on-chip shunting capacitors, and high-quality coplanar waveguide resonators. Furthermore, we discuss the tunability and fundamental symmetry aspects inherent to all superconducting qubits, which can be regarded as artificial solid-state atoms. Comparing them to their natural counterparts, we discuss first- and second-order energy shifts due to static control fields. Additionally, we present an intuitive derivation of the first- and second-order matrix elements for level transitions in the presence of coherent microwave driving.
We fabricate a three-Josephson-junction flux qubit, a nonlinear superconducting circuit acting as a quantum two-level system with a macroscopic degree of freedom. First, the capacitance per unit area of the used Josephson junctions, C s =(100±25)fF/µm 2 , is determined from DC SQUID voltage steps. Next, we probe the coherence times of our qubit using a novel variant of the switching-DC-SQUID readout. At the optimal point, our device is relaxation-limited with T 1 ≅100ns and T φ ≅2µs. Ramsey and spin echo experiments reveal 1/f-noise and suggest microscopic fluctuators in the tunnel barriers as its source. As in other experiments, the 1/f-noise magnitude is ≅(10 -6 Φ 0 ) 2 . Finally, the qubit is coupled to a linear LC-resonator in a circuit quantum electrodynamics experiment. Spectroscopically, an upconversion mechanism enabled by controlled symmetry breaking is demonstrated.
Superconducting (SC) circuits can behave like atoms making transitions between a few energy levels. Such circuits can test quantum mechanics at macroscopic scales and be used to conduct atomic-physics experiments on a silicon chip. This talk overviews a few of our theoretical studies on SC circuits and quantum information processing (QIP) including: SC qubits for single photon generation and for lasing; controllable couplings among qubits; how to increase the coherence time of qubits using a capacitor in parallel to one of the qubit junctions; hybrid circuits involving both charge and flux qubits; testing Bell’s inequality in SC circuits; generation of GHZ states; quantum tomography in SC circuits; preparation of macroscopic quantum superposition states of a cavity field via coupling to a SC qubit; generation of nonclassical photon states using a SC qubit in a microcavity; scalable quantum computing with SC qubits; and information processing with SC qubits in a microwave field. Controllable couplings between qubits can be achieved either directly or indirectly. This can be done with and without coupler circuits, and with and without data-buses like EM fields in cavities (e.g., we will describe both the variable-frequency magnetic flux approach and also a generalized double-resonance approach that we introduced). It is also possible to “turn a quantum bug into a feature” by using microscopic defects as qubits, and the macroscopic junction as a controller of it. We have also studied ways to implement radically different approaches to QIP by using “cluster states” in SC circuits.
Superconducting qubits have in recent years become a promising candidate for the implementation of a quantum computer due to their design flexibility, good protection from decohering elementary excitations, and availability of well developed fabrication and measurement techniques. Superconducting flux qubits, for which the effect of offset charge noise is reduced due to the fact that the Josephson energy dominates over the charging energy, correspond to one of the proposed means of designing a superconducting qubit. A nonlinear dispersive readout scheme of flux qubits involving a DC SQUID magnetometer that avoids the effects of on-chip dissipation can be readily implemented, yielding high contrast output for single qubit readout. Coupling schemes via nonlinear Josephson elements have also been realized. On the other hand, while the means of isolating superconducting qubits from external noise sources has been found, the mechanisms by which they undergo relaxation and decoherence due to intrinsic noise sources in the junctions themselves are not very well understood, and the question of how to deal with these noise sources remains unanswered in the general case. Other questions deal with the problem of experimentally observing entanglement in an array of coupled superconducting qubits, and finding the means by which the existence of entanglement in a typical laboratory setup may to some extent be verified by measurements on a global scale. Following a brief introductory review, we will first investigate the influence of a Two-Level Fluctuator on a DC SQUID driven by a finite current bias. Then we introduce a directly measurable signature of multiqubit entanglement for a large system of qubits and show that it is compatible to a recently introduced measure of global entanglement.
Superconducting circuits operated at low temperatures have led to rapid advances in quantum information processing as well as quantum optics in the microwave regime. Engineered quantum systems with a dense spectrum of modes coupled to artificial atoms, or qubits, formed from superconducting circuits offer an opportunity to explore large-scale entanglement or perform quantum simulations of many-body phenomena. Recent research efforts into artificial metamaterials have yielded microwave and optical systems with numerous counterintuitive properties, including left-handed transmission, where the group velocity and phase velocity for a wave point in opposite directions. Metamaterial resonators implemented with superconducting thin-film circuits provide a route to generating dense mode spectra in the microwave regime for coupling to qubits. In this thesis, we discuss the implementation of such superconducting metamaterial resonators. First, we derive the dispersion relation for one-dimensional metamaterial transmission lines and we describe the formation of resonators from such lines and their quality factors. Next, we describe the design and fabrication of transmission-line metamaterial resonators using superconducting thin films. We characterize the metamaterials through low-temperature microwave measurements as well as Laser Scanning Microscope (LSM) images of the microwave field distributions in the circuit. We compare these various measurements with numerical simulations of the microwave properties of the circuits, including simulated current density and charge density distributions for the excitation of different resonance modes. Following the successful realization of dense mode spectra in these circuits, we have initiated the first experiments with a superconducting transmon qubit coupled to a metamaterial resonator and we describe our progress in this direction.
Superconducting qubits are fabricated "loss-free" electrical circuits on a chip with size features of tens of nanometers. If cooled to cryogenic temperatures below -273 °C they behave as quantum elements, similar to atoms and molecules. Such a qubit can be manipulated by fast-oscillating magnetic fields and its resulting quantum state can be measured using a proper magnetic detector. These qubits could be the basic elements for a quantum processor. To that order, multiple qubits have to controllably interact, and to that purpose very high quality resonators are fabricated on the same chip. Effectively the interaction results from the phase-coherent exchange of a single photon between qubit and resonator. In this way it is highly analogous to the so-called cavity QED in atomic physics where single atoms couple to a single trapped photon, all inside a cavity resonator. In this thesis, a superconducting flux qubit has been coupled to an LC resonator and coherent exchange of a single photon between qubit and resonator has been achieved. A striking option in these superconducting circuits, not attainable in "common" atomic cavity-QED, is that the interaction between qubit and photon can be made very large, up to the limit that one no longer can talk about the qubit and resonator as such. This limit requires a fully different description and it leads to novel effects, e.g. in the energy spectrum of the qubit-resonator composite. The Bloch-Siegert spectral shift is experimentally demonstrated in this thesis. As a small but critical technical aside a new type of control line filter has been developed, which allows strong suppression of excess electrical noise that forms a threat for qubit coherence. Having two modes of operation, it shorts all low-frequency noise if control is idle while being transparent if control is active, where short or open is determined by the control line signal level itself.
We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.