Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0806.3145 · Physical Review A

Operator quantum error correction for continuous dynamics

Ognyan Oreshkov, Daniel A. Lidar, Todd A. Brun

Published Aug 22, 2008• 13 citations
arXivHTMLPDF

Abstract

We study the conditions under which a subsystem code is correctable in the presence of noise that results from continuous dynamics. We consider the case of Markovian dynamics as well as the general case of Hamiltonian dynamics of the system and the environment, and derive necessary and sufficient conditions on the Lindbladian and system-environment Hamiltonian, respectively. For the case when the encoded information is correctable during an entire time interval, the conditions we obtain can be thought of as generalizations of the previously derived conditions for decoherence-free subsystems to the case where the subsystem is time dependent. As a special case, we consider conditions for unitary correctability. In the case of Hamiltonian evolution, the conditions for unitary correctability concern only the effect of the Hamiltonian on the system, whereas the conditions for general correctability concern the entire system-environment Hamiltonian. We also derive conditions on the Hamiltonian which depend on the initial state of the environment, as well as conditions for correctability at only a particular moment of time. We discuss possible implications of our results for approximate quantum error correction.

DOI
10.1103/physreva.78.022333

Related papers

Continuous quantum error correction for non-Markovian decoherence

Ognyan Oreshkov, Todd A. Brun

We study the effect of continuous quantum error correction in the case where each qubit in a codeword is subject to a general Hamiltonian interaction with an independent bath. We first consider the scheme in the case of a trivial single-qubit code, which provides useful insights into the workings of continuous error correction and the difference between Markovian and non-Markovian decoherence. We then study the model of a bit-flip code with each qubit coupled to an independent bath qubit and subject to continuous correction, and find its solution. We show that for sufficiently large error-correction rates, the encoded state approximately follows an evolution of the type of a single decohering qubit, but with an effectively decreased coupling constant. The factor by which the coupling constant is decreased scales quadratically with the error-correction rate. This is compared to the case of Markovian noise, where the decoherence rate is effectively decreased by a factor which scales only linearly with the rate of error correction. The quadratic enhancement depends on the existence of a Zeno regime in the Hamiltonian evolution which is absent in purely Markovian dynamics. We analyze the range of validity of this result and identify two relevant time scales. Finally, we extend the result to more general codes and argue that the performance of continuous error correction will exhibit the same qualitative characteristics.

arXiv:0705.2342•Physical Review A•Aug 20, 2007•47 citations

Continuous-time quantum error correction

Ognyan Oreshkov

Continuous-time quantum error correction (CTQEC) is an approach to protecting quantum information from noise in which both the noise and the error correcting operations are treated as processes that are continuous in time. This chapter investigates CTQEC based on continuous weak measurements and feedback from the point of view of the subsystem principle, which states that protected quantum information is contained in a subsystem of the Hilbert space. We study how to approach the problem of constructing CTQEC protocols by looking at the evolution of the state of the system in an encoded basis in which the subsystem containing the protected information is explicit. This point of view allows us to reduce the problem to that of protecting a known state, and to design CTQEC procedures from protocols for the protection of a single qubit. We show how previously studied CTQEC schemes with both direct and indirect feedback can be obtained from strategies for the protection of a single qubit via weak measurements and weak unitary operations. We also review results on the performance of CTQEC with direct feedback in cases of Markovian and non-Markovian decoherence, where we have shown that due to the existence of a Zeno regime in non-Markovian dynamics, the performance of CTQEC can exhibit a quadratic improvement if the time resolution of the weak error-correcting operations is high enough to reveal the non-Markovian character of the noise process.

arXiv:1311.2485•Cambridge University Press eBooks•Sep 5, 2013•5 citations

Subsystem Quantum Error Correction for Noisy Quantum Metrology

Qiushi Liu, Sisi Zhou

Quantum error correction has been successfully applied to enhance the precision of parameter estimation in the presence of noise. Nonetheless, existing methods require a number of noiseless, controllable ancillae and lack efficient encoding and decoding procedures. In this Letter, we demonstrate that subsystem error correction provides a new direction that can substantially simplify the metrological protocol. We derive general conditions under which subsystem stabilizer codes achieve the Heisenberg limit and show that, for broad classes of noise, this can be realized by syndrome-free protocols using at most a single ancilla qubit. Furthermore, we extend this framework to dynamical error correction and show that Floquet codes can protect time-dependent metrological signals in reaching the Heisenberg limit.

quant-pharXiv:2606.19628•Jun 19, 2026•0 citations

Robustness of operator quantum error correction with respect to initialization errors

Ognyan Oreshkov

In the theory of operator quantum error correction (OQEC), the notion of correctability is defined under the assumption that states are perfectly initialized inside a particular subspace, a factor of which (a subsystem) contains the protected information. If the initial state of the system does not belong entirely to the subspace in question, the restriction of the state to the otherwise correctable subsystem may not remain invariant after the application of noise and error correction. It is known that in the case of decoherence-free subspaces and subsystems (DFSs) the condition for perfect unitary evolution inside the code imposes more restrictive conditions on the noise process if one allows imperfect initialization. It was believed that these conditions are necessary if DFSs are to be able to protect imperfectly encoded states from subsequent errors. By a similar argument, general operator quantum error-correcting (OQEC) codes would also require more restrictive error-correction conditions for the case of imperfect initialization. In this study, we examine this requirement by looking at the errors on the encoded state. In order to quantitatively analyze the errors in an OQEC code, we introduce a measure of the fidelity between the encoded information in two states for the case of subsystem encoding. A major part of the paper concerns the definition of the measure and the derivation of its properties. In contrast to what was previously believed, we obtain that more restrictive conditions are not necessary for either DFSs or for general OQEC codes. This is because the effective noise that can arise inside the code as a result of imperfect initialization is such that it can only increase the fidelity of an imperfectly encoded state with a perfectly encoded one.

arXiv:0709.3533•Physical Review A•Mar 20, 2008•10 citations

Quantum Information Encoding from Stabilizing Dynamics

Francesco Ticozzi, Giacomo Baggio, Lorenza Viola

In order to ensure reliable quantum information processing in realistic noisy devices, it is necessary to resort to suitable error correction and avoidance strategies. A key aspect of these techniques is how the relevant information is logically mapped (encoded) in the noise-protected codewords. Here, we study how to engineer Markov dynamics that transfers the desired information from an "upload" subsystem to the target error-correcting or noiseless quantum code, effectively acting as a dissipative quantum encoder. Dissipative encoders offer advantages with respect to standard unitary encoding protocols based on quantum circuits, as they can associate the target states to non-trivial basins of attraction, and thus tolerate more general initializations in the upload qubits. In particular, we show that devising continuous-time dissipative encoders requires the target code to be invariant, making this task more delicate as compared to its discrete-time counterpart. Nonetheless, we show how this is always possible for stabilizer quantum error-correcting codes.

IEEE Conference on Decision and Control (CDC)•Dec 1, 2019•7 citations

Continuous quantum error correction for evolution under time-dependent Hamiltonians

Juan Atalaya, Shuya Zhang, Murphy Yuezhen Niu +4 more

We develop a protocol for continuous operation of a quantum error correcting code for protection of coherent evolution due to an encoded Hamiltonian against environmental errors, using the three-qubit bit-flip code and bit-flip errors as a canonical example. To detect errors in real time, we filter the output signals from continuous measurement of the error syndrome operators and use a double thresholding protocol for error diagnosis, while correction of errors is done as in the conventional operation. We optimize our continuous operation protocol for evolution under quantum memory and under quantum annealing, by maximizing the fidelity between the target and actual logical states at a specified final time. In the case of quantum memory, we show that our continuous operation protocol yields a logical error rate that is slightly larger than the one obtained from using the optimal Wonham filter for error diagnosis while being simpler to implement. For quantum annealing, we show that our continuous quantum error correction protocol can significantly reduce the final logical state infidelity when the continuous measurements are sufficiently strong relative to the strength of the time-dependent Hamiltonian. We also show that this continuous quantum error correction protocol can reduce the time-to-solution relative to the value obtained from a classical parallelization scheme. These results suggest that a continuous implementation is suitable for quantum error correction in the presence of encoded time-dependent Hamiltonians, opening the possibility of many applications in quantum simulation and quantum annealing.

arXiv:2003.11248•Physical Review A•Apr 5, 2021•19 citations
We study the conditions under which a subsystem code is correctable in the presence of noise that results from continuous dynamics. We consider the case of Markovian dynamics as well as the general case of Hamiltonian dynamics of the system and the environment, and derive necessary and sufficient conditions on the Lindbladian and system-environment Hamiltonian, respectively. For the case when the encoded information is correctable during an entire time interval, the conditions we obtain can be thought of as generalizations of the previously derived conditions for decoherence-free subsystems to the case where the subsystem is time dependent. As a special case, we consider conditions for unitary correctability. In the case of Hamiltonian evolution, the conditions for unitary correctability concern only the effect of the Hamiltonian on the system, whereas the conditions for general correctability concern the entire system-environment Hamiltonian. We also derive conditions on the Hamiltonian which depend on the initial state of the environment, as well as conditions for correctability at only a particular moment of time. We discuss possible implications of our results for approximate quantum error correction.
We study the effect of continuous quantum error correction in the case where each qubit in a codeword is subject to a general Hamiltonian interaction with an independent bath. We first consider the scheme in the case of a trivial single-qubit code, which provides useful insights into the workings of continuous error correction and the difference between Markovian and non-Markovian decoherence. We then study the model of a bit-flip code with each qubit coupled to an independent bath qubit and subject to continuous correction, and find its solution. We show that for sufficiently large error-correction rates, the encoded state approximately follows an evolution of the type of a single decohering qubit, but with an effectively decreased coupling constant. The factor by which the coupling constant is decreased scales quadratically with the error-correction rate. This is compared to the case of Markovian noise, where the decoherence rate is effectively decreased by a factor which scales only linearly with the rate of error correction. The quadratic enhancement depends on the existence of a Zeno regime in the Hamiltonian evolution which is absent in purely Markovian dynamics. We analyze the range of validity of this result and identify two relevant time scales. Finally, we extend the result to more general codes and argue that the performance of continuous error correction will exhibit the same qualitative characteristics.
Continuous-time quantum error correction (CTQEC) is an approach to protecting quantum information from noise in which both the noise and the error correcting operations are treated as processes that are continuous in time. This chapter investigates CTQEC based on continuous weak measurements and feedback from the point of view of the subsystem principle, which states that protected quantum information is contained in a subsystem of the Hilbert space. We study how to approach the problem of constructing CTQEC protocols by looking at the evolution of the state of the system in an encoded basis in which the subsystem containing the protected information is explicit. This point of view allows us to reduce the problem to that of protecting a known state, and to design CTQEC procedures from protocols for the protection of a single qubit. We show how previously studied CTQEC schemes with both direct and indirect feedback can be obtained from strategies for the protection of a single qubit via weak measurements and weak unitary operations. We also review results on the performance of CTQEC with direct feedback in cases of Markovian and non-Markovian decoherence, where we have shown that due to the existence of a Zeno regime in non-Markovian dynamics, the performance of CTQEC can exhibit a quadratic improvement if the time resolution of the weak error-correcting operations is high enough to reveal the non-Markovian character of the noise process.
Quantum error correction has been successfully applied to enhance the precision of parameter estimation in the presence of noise. Nonetheless, existing methods require a number of noiseless, controllable ancillae and lack efficient encoding and decoding procedures. In this Letter, we demonstrate that subsystem error correction provides a new direction that can substantially simplify the metrological protocol. We derive general conditions under which subsystem stabilizer codes achieve the Heisenberg limit and show that, for broad classes of noise, this can be realized by syndrome-free protocols using at most a single ancilla qubit. Furthermore, we extend this framework to dynamical error correction and show that Floquet codes can protect time-dependent metrological signals in reaching the Heisenberg limit.
In the theory of operator quantum error correction (OQEC), the notion of correctability is defined under the assumption that states are perfectly initialized inside a particular subspace, a factor of which (a subsystem) contains the protected information. If the initial state of the system does not belong entirely to the subspace in question, the restriction of the state to the otherwise correctable subsystem may not remain invariant after the application of noise and error correction. It is known that in the case of decoherence-free subspaces and subsystems (DFSs) the condition for perfect unitary evolution inside the code imposes more restrictive conditions on the noise process if one allows imperfect initialization. It was believed that these conditions are necessary if DFSs are to be able to protect imperfectly encoded states from subsequent errors. By a similar argument, general operator quantum error-correcting (OQEC) codes would also require more restrictive error-correction conditions for the case of imperfect initialization. In this study, we examine this requirement by looking at the errors on the encoded state. In order to quantitatively analyze the errors in an OQEC code, we introduce a measure of the fidelity between the encoded information in two states for the case of subsystem encoding. A major part of the paper concerns the definition of the measure and the derivation of its properties. In contrast to what was previously believed, we obtain that more restrictive conditions are not necessary for either DFSs or for general OQEC codes. This is because the effective noise that can arise inside the code as a result of imperfect initialization is such that it can only increase the fidelity of an imperfectly encoded state with a perfectly encoded one.
In order to ensure reliable quantum information processing in realistic noisy devices, it is necessary to resort to suitable error correction and avoidance strategies. A key aspect of these techniques is how the relevant information is logically mapped (encoded) in the noise-protected codewords. Here, we study how to engineer Markov dynamics that transfers the desired information from an "upload" subsystem to the target error-correcting or noiseless quantum code, effectively acting as a dissipative quantum encoder. Dissipative encoders offer advantages with respect to standard unitary encoding protocols based on quantum circuits, as they can associate the target states to non-trivial basins of attraction, and thus tolerate more general initializations in the upload qubits. In particular, we show that devising continuous-time dissipative encoders requires the target code to be invariant, making this task more delicate as compared to its discrete-time counterpart. Nonetheless, we show how this is always possible for stabilizer quantum error-correcting codes.
We develop a protocol for continuous operation of a quantum error correcting code for protection of coherent evolution due to an encoded Hamiltonian against environmental errors, using the three-qubit bit-flip code and bit-flip errors as a canonical example. To detect errors in real time, we filter the output signals from continuous measurement of the error syndrome operators and use a double thresholding protocol for error diagnosis, while correction of errors is done as in the conventional operation. We optimize our continuous operation protocol for evolution under quantum memory and under quantum annealing, by maximizing the fidelity between the target and actual logical states at a specified final time. In the case of quantum memory, we show that our continuous operation protocol yields a logical error rate that is slightly larger than the one obtained from using the optimal Wonham filter for error diagnosis while being simpler to implement. For quantum annealing, we show that our continuous quantum error correction protocol can significantly reduce the final logical state infidelity when the continuous measurements are sufficiently strong relative to the strength of the time-dependent Hamiltonian. We also show that this continuous quantum error correction protocol can reduce the time-to-solution relative to the value obtained from a classical parallelization scheme. These results suggest that a continuous implementation is suitable for quantum error correction in the presence of encoded time-dependent Hamiltonians, opening the possibility of many applications in quantum simulation and quantum annealing.