In a first part, I study the electronic transport through a one-dimensional, finite-length quantum wire of correlated electrons (Luttinger liquid) coupled at arbitrary position via tunnel barriers to two semi-infinite, one-dimensional as well as stripe-like (two-dimensional) leads, thereby bringing theory closer towards systems resembling setups realized in experiments. In particular, I compute the temperature dependence of the linear conductance of a system without bulk impurities. The appearance of new temperature scales introduced by the lengths of the overhanging parts of the leads and the wire implies a conductance function which is much more complex than the simple power-law behavior obtained in earlier approaches. My results can be used to optimize the experimental setups designed for a verification of Luttinger-liquid scaling. In a second part, I suggest a setup to study Luttinger-liquid behavior in quantum wires which allows to determine the Luttinger-liquid parameter from two independent measurements: transport through a quantum dot embedded in the wire and the charge on the dot. To this end, I identified novel Luttinger-liquid power-laws in the charging of the dot. In a more technical part, I extended an adaption of the functional renormalization group such that it can be used on correlated electrons in complex geometries like the wire-lead structures described above and arbitrary dot structures coupled to Luttinger-liquid leads.
Luttinger liquids occupy a notable place in physics as one of the most understood classes of quantum many-body systems. The experimental mission of measuring its main prediction, power laws in observable quantities, has already produced a body of exponents in different semiconductor and metallic structures. Here, we combine tunneling spectroscopy with density-dependent transport measurements in the same quantum wires over more than two orders of magnitude in temperature to very low electron temperatures down to ∼40 mK. This reveals that, when the second 1D subband becomes populated, the temperature dependence splits into two ranges with different exponents in the power-law dependence of the conductance, both dominated by the finite-size effect of the end-tunneling process. This result demonstrates the importance of measuring the Luttinger parameters as well as the number of modes independently through spectroscopy in addition to the transport exponent in the characterization of Luttinger liquids. This opens a pathway to unambiguous interpretation of the exponents observed in quantum wires.
We study transport through a one-dimensional quantum wire of correlated fermions connected to semi-infinite leads. The wire contains either a single impurity or two barriers, the latter allowing for resonant tunneling. In the leads the fermions are assumed to be noninteracting. The wire is described by a microscopic lattice model. Using the functional renormalization group we calculate the linear conductance for wires of mesoscopic length and for all relevant temperature scales. For a single impurity, either strong or weak, we find power-law behavior as a function of temperature. In addition, we can describe the complete crossover from the weak- to the strong-impurity limit. For two barriers, depending on the parameters of the enclosed quantum dot, we find temperature regimes in which the conductance follows power laws with ``universal'' exponents as well as nonuniversal behavior. Our approach leads to a comprehensive picture of resonant tunneling. We compare our results with those of alternative approaches.
We study correlated quantum wires subject to harmonic modulation of the onsite-potential concentrating on the limit of large times, where the response of the system has synchronized with the drive. We identify the ratio
Δε/Ω of the driving amplitude
Δε and the frequency of driving
Ω as the scale determining the crossover from a modified Luttinger liquid picture to a system that behaves effectively like a higher dimensional one. We exemplify this crossover by studying the frequency dependency of the boundary density of state
ρB(ω) as well as the temperature dependency of the linear conductance
G(T) through the wire, if the latter is contacted to leads. Both observables are known to exhibit Luttinger liquid physics without driving given by characteristic power-law suppression as
ω→εF (with
εF the Fermi energy) or
T→0, respectively. With driving we find that this suppression is modified from a single power-law to a superposition of an infinite number of power laws. At small
Δε/Ω≪1 only a few terms of this infinite sum are relevant as the prefactors of higher terms are suppressed exponentially. Thus a picture similar to the equilibrium Luttinger liquid one emerges. Increasing
Δε/Ω an increasing number of power laws contribute to the sum and approaching
Δε/Ω≫1 the system behaves effectively two dimensional, for which the suppression is wiped out completely.
We theoretically investigate transport in a spin-incoherent one-dimensional electron system, which may be realized in quantum wires at low-electron density and finite temperature. Both the pure and disordered cases are considered, both in finite wires and in the thermodynamic limit. The effect of Fermi-liquid leads attached to the finite-length system is also addressed. In the infinite system, we find a phase diagram identical to that obtained for a spinless Luttinger liquid, provided we make the identification
g=2gc, where
g is the interaction parameter in a spinless Luttinger liquid and
gc is the interaction parameter of the charge sector of a Luttinger-liquid theory for electrons with spin. For a finite-length wire attached to Fermi-liquid leads, the transport depends on the details of the disorder in the wire. A simple picture for the crossover from the spin-incoherent regime to the spin-coherent regime as the temperature is varied is also discussed, as well as some physical implications.
We use the technique of bosonization to understand a variety of recent experimental results on the conductivity of a quantum wire. The quantum wire is taken to be a finite-length Luttinger liquid connected on two sides to semi-infinite Fermi liquids through contacts. The contacts are modeled as (short) Luttinger liquids bounded by localized one-body potentials. We use effective actions and the renormalization group to study the effects of electronic interactions within the wire, the length of the wire, finite temperature, and a magnetic field, on the conductivity. We explain the deviations of the conductivity from
2Ne2/h in wires that are not too short as arising from renormalization effects caused by the repulsive interactions. We also explain the universal conductance corrections observed in different channels at higher temperatures. We study the effects of an external magnetic field on electronic transport through this system and explain why odd and even spin-split bands show different renormalizations from the universal conductance values. We discuss the case of resonant transmission and of the possibility of producing a spin valve that only allows electrons of one value of the spin to go through. We compare our results for the conductance corrections with experimental observations. We also propose an experimental test of our model of the contact regions.