Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0803.2022

Quantum Illumination

Seth Lloyd

Published Mar 13, 2008• 11 citations
arXivHTMLPDF

Abstract

The use of entangled light to illuminate objects is shown to provide significant enhancements over unentangled light for detecting and imaging those objects in the presence of high levels of noise and loss. Each signal sent out is entangled with an ancilla, which is retained. Detection takes place via an entangling measurement on the returning signal together with the ancilla. Quantum illumination with e bits of entanglement increases the effective signal-to-noise ratio of detection and imaging by a factor of 2^e, an exponential improvement over unentangled illumination.

DOI
10.48550/arxiv.0803.2022

Related papers

Enhanced Sensitivity of Photodetection via Quantum Illumination

Seth Lloyd

The use of quantum-mechanically entangled light to illuminate objects can provide substantial enhancements over unentangled light for detecting and imaging those objects in the presence of high levels of noise and loss. Each signal sent out is entangled with an ancilla, which is retained. Detection takes place via an entangling measurement on the returning signal together with the ancilla. This paper shows that for photodetection, quantum illumination with m bits of entanglement can in principle increase the effective signal-to-noise ratio by a factor of 2(m), an exponential improvement over unentangled illumination. The enhancement persists even when noise and loss are so great that no entanglement survives at the detector.

Science•Sep 12, 2008•874 citations

Imaging through noise with quantum illumination

Thomas Gregory, Paul‐Antoine Moreau, Ermes Toninelli +1 more

Quantum imaging utilises the quantum states of light to surpass the classical limits of imaging. However, in the real-world quantum imaging schemes are subject to environmental noise and losses that destroy entanglement. Quantum illumination protocols use the spatial correlations between entangled photon-pairs to enable performance enhancements despite the presence of environmental noise and losses. We demonstrate the implementation of such a protocol whose ability to distinguish a quantum signal from environmental noise improves relative to the corresponding direct imaging case as the levels of noise and loss increase. Such quantum illumination protocols should find applications in low-light imaging and quantum LIDAR schemes.

•Oct 2, 2020•12 citations

Quantum illumination using polarization-entangled photon pairs for enhanced object detection

Kanad Sengupta, K. Muhammed Shafi, Soumya Asokan +1 more

Entangled light sources for illuminating objects offer advantages over conventional illumination methods by enhancing the detection sensitivity of reflecting objects. The core of the quantum advantage lies in effectively exploiting quantum correlations to isolate noise and detect objects with low reflectivity. This work experimentally demonstrates the benefits of using polarization-entangled photon pairs for quantum illumination and shows that the quantum correlation measure, using CHSH value and normalized CHSH value, is robust against losses, noise, and depolarization. We report the detection of objects with reflectivity (η) as low as 0.05 and an object submerged in noise with a signal-to-noise ratio of 0.003 using quantum correlation and residual quantum correlation measures, surpassing previous results. Additionally, we demonstrate that the normalized CHSH value aids in estimating the reflectivity of the detected object. Furthermore, we analyze the robustness of the correlation measure under photon attenuation in atmospheric conditions to show the practical feasibility of real-time applications.

arXiv:2401.10182•Optics Express•Sep 6, 2024•9 citations

Quantum illumination via quantum-enhanced sensing

Su‐Yong Lee, Yong Sup Ihn, Zaeill Kim

Quantum-enhanced sensing has a goal of enhancing a parameter sensitivity with input quantum states, while quantum illumination has a goal of enhancing a target detection capability with input entangled states in a heavy noise environment. Here we propose a concatenation between quantum-enhanced sensing and quantum illumination that can take quantum advantage over the classical limit. First, phase sensing in an interferometry is connected to a target sensing via quantum Fisher information. Second, the target sensitivity is investigated in noisy quantum-enhanced sensing. Under the same input state energy, for example, $N$-photon entangled states can exhibit better performance than a two-mode squeezed vacuum state and a separable coherent state. Incorporating a photon-number difference measurement, finally, the noisy target sensitivity is connected to a signal-to-noise ratio which is associated with a minimum error probability of discriminating the presence and absence of the target. We show that both the target sensitivity and the signal-to-noise ratio can be enhanced with increasing thermal noise.

arXiv:2004.09234•Physical Review A•Jan 15, 2021•30 citations

Quantum illumination using polarization-path entangled single photons for low reflectivity object detection in a noisy background

K. Muhammed Shafi, A. Padhye, C. M. Chandrashekar

Detecting object with low reflectivity embedded within a noisy background is a challenging task. Quantum correlations between pairs of quantum states of light, though are highly sensitive to background noise and losses, offer advantages over traditional illumination methods. Instead of using correlated photon pairs which are sensitive, we experimentally demonstrate the advantage of using heralded single-photons entangled in polarization and path degree of freedom for quantum illumination. In the study, the object of different reflectivity is placed along the path of the signal in a variable thermal background before taking the joint measurements and calculating the quantum correlations. We show the significant advantage of using non-interferometric measurements along the multiple paths for single photon to isolate the signal from the background noise and outperform in detecting and ranging the low reflectivity objects even when the signal-to-noise ratio is as low as 0.03. Decrease in visibility of polarization along the signal path also results in similar observations. This will have direct relevance to the development of single-photon based quantum LiDAR and quantum imaging.

arXiv:2303.05218•Optics Express•Aug 16, 2023•9 citations

Improved Target-Detection Signal-to-Noise Ratio via Quantum Illumination

Sara Mouradian, Franco N. C. Wong, Jeffrey H. Shapiro

Abstract: We report the first experimental demonstration of quantum illumination’s signal-to-noise ratio advantage over classical (laser-light) illumination for target detection in a lossy, noisy scenario. © 2013 Optical Society of America

•Jan 1, 2013•2 citations
The use of entangled light to illuminate objects is shown to provide significant enhancements over unentangled light for detecting and imaging those objects in the presence of high levels of noise and loss. Each signal sent out is entangled with an ancilla, which is retained. Detection takes place via an entangling measurement on the returning signal together with the ancilla. Quantum illumination with e bits of entanglement increases the effective signal-to-noise ratio of detection and imaging by a factor of 2^e, an exponential improvement over unentangled illumination.
The use of quantum-mechanically entangled light to illuminate objects can provide substantial enhancements over unentangled light for detecting and imaging those objects in the presence of high levels of noise and loss. Each signal sent out is entangled with an ancilla, which is retained. Detection takes place via an entangling measurement on the returning signal together with the ancilla. This paper shows that for photodetection, quantum illumination with m bits of entanglement can in principle increase the effective signal-to-noise ratio by a factor of 2(m), an exponential improvement over unentangled illumination. The enhancement persists even when noise and loss are so great that no entanglement survives at the detector.
Quantum imaging utilises the quantum states of light to surpass the classical limits of imaging. However, in the real-world quantum imaging schemes are subject to environmental noise and losses that destroy entanglement. Quantum illumination protocols use the spatial correlations between entangled photon-pairs to enable performance enhancements despite the presence of environmental noise and losses. We demonstrate the implementation of such a protocol whose ability to distinguish a quantum signal from environmental noise improves relative to the corresponding direct imaging case as the levels of noise and loss increase. Such quantum illumination protocols should find applications in low-light imaging and quantum LIDAR schemes.
Entangled light sources for illuminating objects offer advantages over conventional illumination methods by enhancing the detection sensitivity of reflecting objects. The core of the quantum advantage lies in effectively exploiting quantum correlations to isolate noise and detect objects with low reflectivity. This work experimentally demonstrates the benefits of using polarization-entangled photon pairs for quantum illumination and shows that the quantum correlation measure, using CHSH value and normalized CHSH value, is robust against losses, noise, and depolarization. We report the detection of objects with reflectivity (η) as low as 0.05 and an object submerged in noise with a signal-to-noise ratio of 0.003 using quantum correlation and residual quantum correlation measures, surpassing previous results. Additionally, we demonstrate that the normalized CHSH value aids in estimating the reflectivity of the detected object. Furthermore, we analyze the robustness of the correlation measure under photon attenuation in atmospheric conditions to show the practical feasibility of real-time applications.
Quantum-enhanced sensing has a goal of enhancing a parameter sensitivity with input quantum states, while quantum illumination has a goal of enhancing a target detection capability with input entangled states in a heavy noise environment. Here we propose a concatenation between quantum-enhanced sensing and quantum illumination that can take quantum advantage over the classical limit. First, phase sensing in an interferometry is connected to a target sensing via quantum Fisher information. Second, the target sensitivity is investigated in noisy quantum-enhanced sensing. Under the same input state energy, for example, NNN-photon entangled states can exhibit better performance than a two-mode squeezed vacuum state and a separable coherent state. Incorporating a photon-number difference measurement, finally, the noisy target sensitivity is connected to a signal-to-noise ratio which is associated with a minimum error probability of discriminating the presence and absence of the target. We show that both the target sensitivity and the signal-to-noise ratio can be enhanced with increasing thermal noise.
Detecting object with low reflectivity embedded within a noisy background is a challenging task. Quantum correlations between pairs of quantum states of light, though are highly sensitive to background noise and losses, offer advantages over traditional illumination methods. Instead of using correlated photon pairs which are sensitive, we experimentally demonstrate the advantage of using heralded single-photons entangled in polarization and path degree of freedom for quantum illumination. In the study, the object of different reflectivity is placed along the path of the signal in a variable thermal background before taking the joint measurements and calculating the quantum correlations. We show the significant advantage of using non-interferometric measurements along the multiple paths for single photon to isolate the signal from the background noise and outperform in detecting and ranging the low reflectivity objects even when the signal-to-noise ratio is as low as 0.03. Decrease in visibility of polarization along the signal path also results in similar observations. This will have direct relevance to the development of single-photon based quantum LiDAR and quantum imaging.