We study decoherence effects in a dc SQUID phase qubit caused by an isolation circuit with a resonant frequency. The coupling between the SQUID phase qubit and its environment is modeled via the Caldeira-Leggett formulation of quantum dissipation/coherence, where the spectral density of the environment is related to the admittance of the isolation circuit. When the frequency of the qubit is at least two times larger than the resonance frequency of the isolation circuit, we find that the decoherence time of the qubit is two orders of magnitude larger than the typical ohmic regime, where the frequency of the qubit is much smaller than the resonance frequency of the isolation circuit. Lastly, we show that when the qubit frequency is on resonance with the isolation circuit, an oscillatory non-Markovian decay emerges, as the dc SQUID phase qubit and its environment self-generate Rabi oscillations of characteristic time scales shorter than the decoherence time.
We study decoherence effects in a dc SQUID phase qubit caused by an isolation circuit with a resonant frequency. The coupling between the SQUID phase qubit and its environment is modeled via the Caldeira-Leggett formulation of quantum dissipation/coherence, where the spectral density of the environment is related to the admittance of the isolation circuit. When the frequency of the qubit is at least two times larger than the resonance frequency of the isolation circuit, we find that the decoherence time of the qubit is two orders of magnitude larger than the typical ohmic regime, where the frequency of the qubit is much smaller than the resonance frequency of the isolation circuit. Lastly, we show that when the qubit frequency is on resonance with the isolation circuit, an oscillatory non-Markovian decay emerges, as the dc SQUID phase qubit and its environment self-generate Rabi oscillations of characteristic time scales shorter than the decoherence time.
We study decoherence effects in qubits coupled to environments that exhibit resonant frequencies in their spectral function. We model the coupling of the qubit to its environment via the Caldeira-Leggett formulation of quantum dissipation/coherence, and study the simplest example of decoherence effects in circuits with resonances such as a dc superconducting quantum interference device (SQUID) phase qubit in the presence of an isolation circuit. Using the dc SQUID phase qubit as an example, we obtain two quite general results. First, when the frequency of the qubit is at least two times larger than the resonance frequency of the environmental spectral density (the isolation circuit in the case of a dc SQUID phase qubit), we find that the decoherence time of the qubit is a few orders of magnitude larger than that of the typical Ohmic regime, where the frequency of the qubit is much smaller than the resonance frequency of the spectral density. Second, we show that, when the qubit frequency is nearly the same as the resonant frequency of the environmental spectral density, an oscillatory non-Markovian decay emerges, as the qubit and its environment self-generate Rabi oscillations of characteristic time scales shorter than the decoherence time.
We study decoherence effects in qubits coupled to environments that exhibit resonant frequencies in their spectral function. We model the coupling of the qubit to its environment via the Caldeira-Leggett formulation of quantum dissipation/coherence, and study the simplest example of decoherence effects in circuits with resonances such as a dc SQUID phase qubit in the presence of an isolation circuit, which is designed to enhance the coherence time. We emphasize that the spectral density of the environment is strongly dependent on the circuit design, and can be engineered to produce longer decoherence times. We begin with a general discussion of superconducting qubits such as the flux qubit, the Cooper pair box and the phase qubit and show that in these kinds of systems appropriate circuit design can greatly modify the spectral density of the environment and lead to enhancement of decoherence times. In the particular case of the phase qubit, for instance, we show that when the frequency of the qubit is at least two times larger than the resonance frequency of the environmental spectral density, the decoherence time of the qubit is a few orders of magnitude larger than that of the typical ohmic regime, where the frequency of the qubit is much smaller than the resonance frequency of the spectral density. In addition, we demonstrate that the environment does not only affect the decoherence time, but also the frequency of the transition itself, which is shifted from its environment-free value. Second, we show that when the qubit frequency is nearly the same as the resonant frequency of the environmental spectral density, an oscillatory non-Markovian decay emerges, as the qubit and its environment self-generate Rabi oscillations of characteristic time scales shorter than the decoherence time.
We report measurements of Rabi oscillations and spectroscopic coherence times in an Al/AlOx/Al and three Nb/AlOx/Nb dc SQUID phase qubits. One junction of the SQUID acts as a phase qubit and the other junction acts as a current-controlled nonlinear isolating inductor, allowing us to change the coupling to the current bias leads in situ by an order of magnitude. We found that for the Al qubit, a spectroscopic coherence time ${T}_{2}^{\ensuremath{\ast}}$ varied from 3 to 7 ns and the decay envelope of Rabi oscillations had a time constant ${T}^{\ensuremath{'}}=25\phantom{\rule{0.3em}{0ex}}\text{ns}$ on average at 80 mK. The three Nb devices also showed ${T}_{2}^{\ensuremath{\ast}}$ in the range of 3--8 ns, but ${T}^{\ensuremath{'}}$ was 9--15 ns, just about 1/2 the value we found in the Al device. For all the devices, the time constants were roughly independent of the isolation from the bias lines, implying that noise and dissipation from the bias leads were not the principal sources of dephasing and inhomogeneous broadening.
This thesis examines sources of dissipation and dephasing in a dc SQUID phase qubit. Coupling of the qubit to the bias lines and lossy dielectrics causes the qubit to lose quantum information through a process known generally as decoherence. Using knowledge of the possible sources of decoherence, a dc SQUID phase qubit is designed with parameters that should have made it resistant to dissipation and dephasing from those sources. Device PB9 was a dc SQUID with one small area 0.23 (μm)2 Josephson junction with a critical current of 130 nA, which was meant to be the qubit junction, and a larger area 5 (μm)2 junction with a critical current of 8.6 μA, which acted as part of an inductive isolation network. The qubit junction was shunted by a 1.5 pF low-loss interdigitated capacitor. The dc current bias line had an on-chip LC filter with a cutoff frequency of 180 MHz. The other control lines were also designed to minimize coupling of dissipative elements to the qubit. According to a theoretical model of the dissipation and dephasing, the qubit was expected to have an energy relaxation T1 ≤ 8.4 μs and dephasing time Tø ∼ 1 μs. Because of the relatively high Josephson inductance of the qubit junction, the device did not act perform like a conventional isolated single-junction phase qubit. Instead, the resonant modes that I observed were the normal modes of the entire SQUID. At 20 mK and a frequency of 4.047 GHz, the maximum energy relaxation time of the device was found to be 350 ± 70 ns, despite the optimized design. Through a study of T1 versus applied flux, T1 was found to depend on the strength of the coupling of the microwave drive line to the qubit. When the line was more coupled, T1 was shorter. This was evidence that the microwave line was overcoupled to the qubit, and was limiting the lifetime of the excited state T1. Through a study of the spectroscopic coherence time T2* , which measured the effects of low-frequency inhomogeneous broadening and higher frequency dephasing from noise, I discovered that device PB9 has several sweet spots. In particular, the presence of a sweet spot with respect to critical current fluctuations allowed me to identify critical current noise as a major source of broadening and dephasing in the qubit. From the spectroscopy I estimated the 1/f critical current noise power density at 1 Hz was SI01 (1Hz) ≈ 10 (nA) 2/Hz and the 1/f flux noise power spectral density at 1 Hz was SΦ (1Hz) ≈ (110 μΦ 0)2/Hz. Both of these values were quite high, possibly due to switching of the device between measurements.
We examine the effect of multilevels on decoherence and dephasing properties of a quantum system consisting of a nonideal two level subspace, identified as the qubit, and a finite set of higher energy levels above this qubit subspace. The whole system is under interaction with an environmental bath through a Caldeira-Leggett type coupling. The model that we use is an rf-SQUID under macroscopic quantum coherence and coupled inductively to a flux noise characterized by an environmental spectrum. The model interaction can generate dipole couplings which can be appreciable between the qubit and the high levels. The decoherence properties of the qubit subspace is examined numerically using the master equation formalism of the system's reduced density matrix. We calculate the relaxation and dephasing times as the spectral parameters of the environment are varied. We observe that, these calculated time scales receive contribution from all available frequencies in the noise spectrum (even well above the system's resonant frequency scales) stressing the dominant role played by the nonresonant transitions. The relaxation and dephasing and the leakage times thus calculated, strongly depend on the appreciably interacting levels determined by the strength of the dipole coupling. Under the influence of these nonresonant and multilevel effects, the validity of the two level approximation is dictated not by the low temperature as conveniently believed, but by these multilevel dipole couplings as well as the availability of the environmental modes.
We have fabricated and tested an Al/AlOx/Al dc SQUID phase qubit on a sapphire substrate with a qubit junction area 0.17 μm2and critical current I0,J1= 1.4 μA. The qubit is shunted by an interdigitated capacitor and isolated from the bias leads by an inductive isolation network using a larger Josephson junction with area 2 μm2and critical current I0,J2= 29 μA. Additional high-frequency filtering is provided by an on-chip LC filter, which consists of square spiral inductors and parallel plate SiNxcapacitors. From detuned Rabi oscillation measurements, we estimate a relaxation time T1≈ 400 ns and dephasing time TΦ1700 ns. Additionally, we observe that the qubit transition spectrum has multiple equally spaced subpeaks. These subpeaks are caused by coupling between the phase qubit and the LC filter, forming a Jaynes-Cummings system. Each individual subpeak corresponds to transitions with different photon numbers in the LC filter.